MindView Inc.
[ Viewing Hints ] [ Revision History ] [ Book Home Page ] [ Free Newsletter ]
[ Seminars ] [ Seminars on CD ROM ] [ Consulting ]

Thinking in Java, 2nd edition, Revision 12

©2000 by Bruce Eckel

[ Previous Chapter ] [ Short TOC ] [ Table of Contents ] [ Index ] [ Next Chapter ]

9: Holding
Your Objects

It’s a fairly simple program that has only a fixed quantity of objects with known lifetimes.

In general, your programs will always be creating new objects based on some criteria that will be known only at the time the program is running. You won’t know until run-time the quantity or even the exact type of the objects you need. To solve the general programming problem, you need to be able to create any number of objects, anytime, anywhere. So you can’t rely on creating a named reference to hold each one of your objects:

MyObject myReference;

since you’ll never know how many of these you’ll actually need. [ Add Comment ]

To solve this rather essential problem, Java has several ways to hold objects (or rather, references to objects). The built-in type is the array, which has been discussed before. Also, the Java utilities library has a reasonably complete set of container classes (also known as collection classes, but because the Java 2 libraries use the name Collection to refer to a particular subset of the library, I shall use the more inclusive term “container”). Containers provide sophisticated ways to hold and even manipulate your objects. [ Add Comment ]

Arrays

Most of the necessary introduction to arrays is in the last section of Chapter 4, which showed how you define and initialize an array. Holding objects is the focus of this chapter, and an array is just one way to hold objects. But there are a number of other ways to hold objects, so what makes an array special? [ Add Comment ]

There are two issues that distinguish arrays from other types of containers: efficiency and type. The array is the most efficient way that Java provides to store and randomly access a sequence of objects (actually, object references). The array is a simple linear sequence, which makes element access fast, but you pay for this speed: when you create an array object, its size is fixed and cannot be changed for the lifetime of that array object. You might suggest creating an array of a particular size and then, if you run out of space, creating a new one and moving all the references from the old one to the new one. This is the behavior of the ArrayList class, which will be studied later in this chapter. However, because of the overhead of this size flexibility, an ArrayList is measurably less efficient than an array. [ Add Comment ]

The vector container class in C++ does know the type of objects it holds, but it has a different drawback when compared with arrays in Java: the C++ vector’s operator[] doesn’t do bounds checking, so you can run past the end[44]. In Java, you get bounds checking regardless of whether you’re using an array or a container—you’ll get a RuntimeException if you exceed the bounds. As you’ll learn in Chapter 10, this type of exception indicates a programmer error, and thus you don’t need to check for it in your code. As an aside, the reason the C++ vector doesn’t check bounds with every access is speed—in Java you have the constant performance overhead of bounds checking all the time for both arrays and containers. [ Add Comment ]

The other generic container classes that will be studied in this chapter, List, Set, and Map, all deal with objects as if they had no specific type. That is, they treat them as type Object, the root class of all classes in Java. This works fine from one standpoint: you need to build only one container, and any Java object will go into that container. (Except for primitives—these can be placed in containers as constants using the Java primitive wrapper classes, or as changeable values by wrapping in your own class.) This is the second place where an array is superior to the generic containers: when you create an array, you create it to hold a specific type. This means that you get compile-time type checking to prevent you from putting the wrong type in, or mistaking the type that you’re extracting. Of course, Java will prevent you from sending an inappropriate message to an object, either at compile-time or at run-time. So it’s not much riskier one way or the other, it’s just nicer if the compiler points it out to you, faster at run-time, and there’s less likelihood that the end user will get surprised by an exception. [ Add Comment ]

For efficiency and type checking it’s always worth trying to use an array if you can. However, when you’re trying to solve a more general problem arrays can be too restrictive. After looking at arrays, the rest of this chapter will be devoted to the container classes provided by Java. [ Add Comment ]

Arrays are first-class objects

Regardless of what type of array you’re working with, the array identifier is actually a reference to a true object that’s created on the heap. This is the object that holds the references to the other objects, and it can be created either implicitly, as part of the array initialization syntax, or explicitly with a new expression. Part of the array object (in fact, the only field or method you can access) is the read-only length member that tells you how many elements can be stored in that array object. The ‘[]’ syntax is the only other access that you have to the array object. [ Add Comment ]

The following example shows the various ways that an array can be initialized, and how the array references can be assigned to different array objects. It also shows that arrays of objects and arrays of primitives are almost identical in their use. The only difference is that arrays of objects hold references, while arrays of primitives hold the primitive values directly. [ Add Comment ]

//: c09:ArraySize.java
// Initialization & re-assignment of arrays.

class Weeble {} // A small mythical creature

public class ArraySize {
  public static void main(String[] args) {
    // Arrays of objects:
    Weeble[] a; // Null reference
    Weeble[] b = new Weeble[5]; // Null references
    Weeble[] c = new Weeble[4];
    for(int i = 0; i < c.length; i++)
      c[i] = new Weeble();
    // Aggregate initialization:
    Weeble[] d = { 
      new Weeble(), new Weeble(), new Weeble()
    };
    // Dynamic aggregate initialization:
    a = new Weeble[] {
      new Weeble(), new Weeble()
    };
    System.out.println("a.length=" + a.length);
    System.out.println("b.length = " + b.length);
    // The references inside the array are 
    // automatically initialized to null:
    for(int i = 0; i < b.length; i++)
      System.out.println("b[" + i + "]=" + b[i]);
    System.out.println("c.length = " + c.length);
    System.out.println("d.length = " + d.length);
    a = d;
    System.out.println("a.length = " + a.length);

    // Arrays of primitives:
    int[] e; // Null reference
    int[] f = new int[5];
    int[] g = new int[4];
    for(int i = 0; i < g.length; i++)
      g[i] = i*i;
    int[] h = { 11, 47, 93 };
    // Compile error: variable e not initialized:
    //!System.out.println("e.length=" + e.length);
    System.out.println("f.length = " + f.length);
    // The primitives inside the array are
    // automatically initialized to zero:
    for(int i = 0; i < f.length; i++)
      System.out.println("f[" + i + "]=" + f[i]);
    System.out.println("g.length = " + g.length);
    System.out.println("h.length = " + h.length);
    e = h;
    System.out.println("e.length = " + e.length);
    e = new int[] { 1, 2 };
    System.out.println("e.length = " + e.length);
  }
} ///:~

Here’s the output from the program:

b.length = 5
b[0]=null
b[1]=null
b[2]=null
b[3]=null
b[4]=null
c.length = 4
d.length = 3
a.length = 3
a.length = 2
f.length = 5
f[0]=0
f[1]=0
f[2]=0
f[3]=0
f[4]=0
g.length = 4
h.length = 3
e.length = 3
e.length = 2

The array a is initially just a null reference, and the compiler prevents you from doing anything with this reference until you’ve properly initialized it. The array b is initialized to point to an array of Weeble references, but no actual Weeble objects are ever placed in that array. However, you can still ask what the size of the array is, since b is pointing to a legitimate object. This brings up a slight drawback: you can’t find out how many elements are actually in the array, since length tells you only how many elements can be placed in the array; that is, the size of the array object, not the number of elements it actually holds. However, when an array object is created its references are automatically initialized to null, so you can see whether a particular array slot has an object in it by checking to see whether it’s null. Similarly, an array of primitives is automatically initialized to zero for numeric types, (char)0 for char, and false for boolean. [ Add Comment ]

Array c shows the creation of the array object followed by the assignment of Weeble objects to all the slots in the array. Array d shows the “aggregate initialization” syntax that causes the array object to be created (implicitly with new on the heap, just like for array c) and initialized with Weeble objects, all in one statement. [ Add Comment ]

The next array initialization could be thought of as a “dynamic aggregate initialization.” The aggregate initialization used by d must be used at the point of d’s definition, but with the second syntax you can create and initialize an array object anywhere. For example, suppose hide( ) is a method that takes an array of Weeble objects. You could call it by saying:

hide(d);

but you can also dynamically create the array you want to pass as the argument:

hide(new Weeble[] { new Weeble(), new Weeble() });

In some situations this new syntax provides a more convenient way to write code. [ Add Comment ]

The expression:

a = d;

shows how you can take a reference that’s attached to one array object and assign it to another array object, just as you can do with any other type of object reference. Now both a and d are pointing to the same array object on the heap. [ Add Comment ]

The second part of ArraySize.java shows that primitive arrays work just like object arrays except that primitive arrays hold the primitive values directly. [ Add Comment ]

Containers of primitives

Container classes can hold only references to objects. An array, however, can be created to hold primitives directly, as well as references to objects. It is possible to use the “wrapper” classes such as Integer, Double, etc. to place primitive values inside a container, but the wrapper classes for primitives can be awkward to use. In addition, it’s much more efficient to create and access an array of primitives than a container of wrapped primitives. [ Add Comment ]

Of course, if you’re using a primitive type and you need the flexibility of a container that automatically expands when more space is needed, the array won’t work and you’re forced to use a container of wrapped primitives. You might think that there should be a specialized type of ArrayList for each of the primitive data types, but Java doesn’t provide this for you. Some sort of templatizing mechanism might someday provide a better way for Java to handle this problem.[45]Add Comment ]

Returning an array

Suppose you’re writing a method and you don’t just want to return just one thing, but a whole bunch of things. Languages like C and C++ make this difficult because you can’t just return an array, only a pointer to an array. This introduces problems because it becomes messy to control the lifetime of the array, which easily leads to memory leaks. [ Add Comment ]

Java takes a similar approach, but you just “return an array.” Actually, of course, you’re returning a reference to an array, but with Java you never worry about responsibility for that array—it will be around as long as you need it, and the garbage collector will clean it up when you’re done. [ Add Comment ]

As an example, consider returning an array of String:

//: c09:IceCream.java
// Returning arrays from methods.

public class IceCream {
  static String[] flav = {
    "Chocolate", "Strawberry",
    "Vanilla Fudge Swirl", "Mint Chip",
    "Mocha Almond Fudge", "Rum Raisin",
    "Praline Cream", "Mud Pie" 
  };
  static String[] flavorSet(int n) {
    // Force it to be positive & within bounds:
    n = Math.abs(n) % (flav.length + 1);
    String[] results = new String[n];
    boolean[] picked = 
      new boolean[flav.length];
    for (int i = 0; i < n; i++) {
      int t;
      do 
        t = (int)(Math.random() * flav.length);
      while (picked[t]);
      results[i] = flav[t];
      picked[t] = true;
    }
    return results;
  }
  public static void main(String[] args) {
    for(int i = 0; i < 20; i++) {
      System.out.println(
        "flavorSet(" + i + ") = ");
      String[] fl = flavorSet(flav.length);
      for(int j = 0; j < fl.length; j++)
        System.out.println("\t" + fl[j]);
    }
  }
} ///:~

The method flavorSet( ) creates an array of String called results. The size of this array is n, determined by the argument you pass into the method. Then it proceeds to choose flavors randomly from the array flav and place them into results, which it finally returns. Returning an array is just like returning any other object—it’s a reference. It’s not important that the array was created within flavorSet( ), or that the array was created anyplace else, for that matter. The garbage collector takes care of cleaning up the array when you’re done with it, and the array will persist for as long as you need it. [ Add Comment ]

As an aside, notice that when flavorSet( ) chooses flavors randomly, it ensures that a random choice hasn’t been picked before. This is performed in a do loop that keeps making random choices until it finds one that’s not already in the picked array. (Of course, a String comparison could also have been performed to see if the random choice was already in the results array, but String comparisons are inefficient.) If it’s successful, it adds the entry and finds the next one (i gets incremented). [ Add Comment ]

main( ) prints out 20 full sets of flavors, so you can see that flavorSet( ) chooses the flavors in a random order each time. It’s easiest to see this if you redirect the output into a file. And while you’re looking at the file, remember, you just want the ice cream, you don’t need it. [ Add Comment ]

The Arrays class

In java.util, you’ll find the Arrays class, which holds a set of static methods that perform utility functions for arrays. There are four basic functions: equals( ), to compare two arrays for equality; fill( ), to fill an array with a value; sort( ), to sort the array; and binarySearch( ), to find an element in a sorted array. All of these methods are overloaded for all the primitive types and Objects. In addition, there’s a single asList( ) method that takes any array and turns it into a List container—which you’ll learn about later in this chapter. [ Add Comment ]

While useful, the Arrays class stops short of being fully functional. For example, it would be nice to be able to easily print the elements of an array without having to code a for loop by hand every time. And as you’ll see, the fill( ) method only takes a single value and places it in the array, so if you wanted—for example—to fill an array with randomly generated numbers, fill( ) is no help. [ Add Comment ]

Thus it makes sense to supplement the Arrays class with some additional utilities, which will be placed in the package com.bruceeckel.util for convenience. These will print an array of any type, and fill an array with values or objects that are created by an object called a generator that you can define. [ Add Comment ]

Because code needs to be created for each primitive type as well as Object, there’s a lot of nearly duplicated code[46]. For example, a “generator” interface is required for each type because the return type of next( ) must be different in each case:

//: com:bruceeckel:util:Generator.java
package com.bruceeckel.util;
public interface Generator { 
  Object next(); 
} ///:~

//: com:bruceeckel:util:BooleanGenerator.java
package com.bruceeckel.util;
public interface BooleanGenerator {
  boolean next();
} ///:~

//: com:bruceeckel:util:ByteGenerator.java
package com.bruceeckel.util;
public interface ByteGenerator {
  byte next();
} ///:~

//: com:bruceeckel:util:CharGenerator.java
package com.bruceeckel.util;
public interface CharGenerator {
  char next();
} ///:~

//: com:bruceeckel:util:ShortGenerator.java
package com.bruceeckel.util;
public interface ShortGenerator {
  short next();
} ///:~

//: com:bruceeckel:util:IntGenerator.java
package com.bruceeckel.util;
public interface IntGenerator {
  int next();
} ///:~

//: com:bruceeckel:util:LongGenerator.java
package com.bruceeckel.util;
public interface LongGenerator {
  long next();
} ///:~

//: com:bruceeckel:util:FloatGenerator.java
package com.bruceeckel.util;
public interface FloatGenerator {
  float next();
} ///:~

//: com:bruceeckel:util:DoubleGenerator.java
package com.bruceeckel.util;
public interface DoubleGenerator {
  double next();
} ///:~

Arrays2 contains a variety of print( ) functions, overloaded for each type. You can simply print an array, you can add a message before the array is printed, or you can print a range of elements within an array. The print( ) code is self-explanatory:

//: com:bruceeckel:util:Arrays2.java
// A supplement to java.util.Arrays, to provide
// additional useful functionality when working
// with arrays. Allows any array to be printed,
// and to be filled via a user-defined 
// "generator" object.
package com.bruceeckel.util;
import java.util.*;

public class Arrays2 {
  private static void
  start(int from, int to, int length) {
    if(from != 0 || to != length)
      System.out.print("["+ from +":"+ to +"] ");
    System.out.print("(");
  }
  private static void end() {
    System.out.println(")");
  }
  public static void print(Object[] a) {
    print(a, 0, a.length);
  }
  public static void 
  print(String msg, Object[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(Object[] a, int from, int to){
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to -1)
        System.out.print(", ");
    }
    end();
  }
  public static void print(boolean[] a) {
      print(a, 0, a.length);
  }
  public static void 
  print(String msg, boolean[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(boolean[] a, int from, int to) {
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to -1)
        System.out.print(", ");
    }
    end();
  }
  public static void print(byte[] a) {
      print(a, 0, a.length);
  }
  public static void 
  print(String msg, byte[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(byte[] a, int from, int to) {
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to -1)
        System.out.print(", ");
    }
    end();
  }
  public static void print(char[] a) {
      print(a, 0, a.length);
  }
  public static void 
  print(String msg, char[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(char[] a, int from, int to) {
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to -1)
        System.out.print(", ");
    }
    end();
  }
  public static void print(short[] a) {
      print(a, 0, a.length);
  }
  public static void 
  print(String msg, short[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(short[] a, int from, int to) {
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to - 1)
        System.out.print(", ");
    }
    end();
  }
  public static void print(int[] a) {
      print(a, 0, a.length);
  }
  public static void 
  print(String msg, int[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(int[] a, int from, int to) {
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to - 1)
        System.out.print(", ");
    }
    end();
  }
  public static void print(long[] a) {
    print(a, 0, a.length);
  }
  public static void 
  print(String msg, long[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(long[] a, int from, int to) {
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to - 1)
        System.out.print(", ");
    }
    end();
  }
  public static void print(float[] a) {
      print(a, 0, a.length);
  }
  public static void 
  print(String msg, float[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(float[] a, int from, int to) {
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to - 1)
        System.out.print(", ");
    }
    end();
  }
  public static void print(double[] a) {
      print(a, 0, a.length);
  }
  public static void 
  print(String msg, double[] a) {
    System.out.print(msg + " ");
    print(a, 0, a.length);
  }
  public static void 
  print(double[] a, int from, int to){
    start(from, to, a.length);
    for(int i = from; i < to; i++) {
      System.out.print(a[i]);
      if(i < to - 1)
        System.out.print(", ");
    }
    end();
  }
  // Fill an array using a generator:
  public static void 
  fill(Object[] a, Generator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(Object[] a, int from, int to, 
       Generator gen){
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  public static void 
  fill(boolean[] a, BooleanGenerator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(boolean[] a, int from, int to,
       BooleanGenerator gen) {
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  public static void 
  fill(byte[] a, ByteGenerator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(byte[] a, int from, int to, 
       ByteGenerator gen) {
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  public static void 
  fill(char[] a, CharGenerator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(char[] a, int from, int to, 
       CharGenerator gen) {
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  public static void 
  fill(short[] a, ShortGenerator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(short[] a, int from, int to, 
       ShortGenerator gen) {
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  public static void 
  fill(int[] a, IntGenerator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(int[] a, int from, int to, 
       IntGenerator gen) {
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  public static void 
  fill(long[] a, LongGenerator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(long[] a, int from, int to, 
       LongGenerator gen) {
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  public static void 
  fill(float[] a, FloatGenerator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(float[] a, int from, int to, 
       FloatGenerator gen) {
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  public static void 
  fill(double[] a, DoubleGenerator gen) {
      fill(a, 0, a.length, gen);
  }
  public static void 
  fill(double[] a, int from, int to,
       DoubleGenerator gen){
    for(int i = from; i < to; i++)
      a[i] = gen.next();
  }
  private static Random r = new Random();
  public static class RandBooleanGenerator 
  implements BooleanGenerator {
    public boolean next() { 
      return r.nextBoolean();
    }
  }
  public static class RandByteGenerator 
  implements ByteGenerator {
    public byte next() { 
      return (byte)r.nextInt();
    }
  }
  static String ssource = 
    "ABCDEFGHIJKLMNOPQRSTUVWXYZ" +
    "abcdefghijklmnopqrstuvwxyz";
  static char[] src = ssource.toCharArray();
  public static class RandCharGenerator 
  implements CharGenerator {
    public char next() {
      int pos = Math.abs(r.nextInt());
      return src[pos % src.length];
    }
  }
  public static class RandStringGenerator
  implements Generator {
    private int len;
    private RandCharGenerator cg = 
      new RandCharGenerator();
    public RandStringGenerator(int length) {
      len = length;
    }
    public Object next() {
      char[] buf = new char[len];
      for(int i = 0; i < len; i++)
        buf[i] = cg.next();
      return new String(buf);
    }
  }
  public static class RandShortGenerator 
  implements ShortGenerator {
    public short next() { 
      return (short)r.nextInt();
    }
  }
  public static class RandIntGenerator 
  implements IntGenerator {
    private int mod = 10000;
    public RandIntGenerator() {}
    public RandIntGenerator(int modulo) {
      mod = modulo;
    }
    public int next() { 
      return r.nextInt() % mod; 
    }
  }
  public static class RandLongGenerator 
  implements LongGenerator {
    public long next() { return r.nextLong(); }
  }
  public static class RandFloatGenerator 
  implements FloatGenerator {
    public float next() { return r.nextFloat(); }
  }
  public static class RandDoubleGenerator 
  implements DoubleGenerator {
    public double next() {return r.nextDouble();}
  }
} ///:~

To fill an array of elements using a generator, the fill( ) method takes a reference to an appropriate generator interface, which has a next( ) method that will somehow produce an object of the right type (depending on how the interface is implemented). The fill( ) method simply calls next( ) until the desired range has been filled. Now you can create any generator by implementing the appropriate interface, and use your generator with fill( ). [ Add Comment ]

Random data generators are useful for testing, so a set of inner classes is created to implement all the primitive generator interfaces, as well as a String generator to represent Object. You can see that RandStringGenerator uses RandCharGenerator to fill an array of characters, which is then turned into a String. The size of the array is determined by the constructor argument. [ Add Comment ]

To generate numbers that aren’t too large, RandIntGenerator defaults to a modulus of 10,000, but the overloaded constructor allows you to choose a smaller value. [ Add Comment ]

Here’s a program to test the library, and to demonstrate how it is used:

//: c09:TestArrays2.java
// Test and demonstrate Arrays2 utilities
import com.bruceeckel.util.*;

public class TestArrays2 {
  public static void main(String[] args) {
    int size = 6;
    // Or get the size from the command line:
    if(args.length != 0)
      size = Integer.parseInt(args[0]);
    boolean[] a1 = new boolean[size];
    byte[] a2 = new byte[size];
    char[] a3 = new char[size];
    short[] a4 = new short[size];
    int[] a5 = new int[size];
    long[] a6 = new long[size];
    float[] a7 = new float[size];
    double[] a8 = new double[size];
    String[] a9 = new String[size];
    Arrays2.fill(a1, 
      new Arrays2.RandBooleanGenerator());
    Arrays2.print(a1);
    Arrays2.print("a1 = ", a1);
    Arrays2.print(a1, size/3, size/3 + size/3);
    Arrays2.fill(a2,
      new Arrays2.RandByteGenerator());
    Arrays2.print(a2);
    Arrays2.print("a2 = ", a2);
    Arrays2.print(a2, size/3, size/3 + size/3);
    Arrays2.fill(a3,
      new Arrays2.RandCharGenerator());
    Arrays2.print(a3);
    Arrays2.print("a3 = ", a3);
    Arrays2.print(a3, size/3, size/3 + size/3);
    Arrays2.fill(a4,
      new Arrays2.RandShortGenerator());
    Arrays2.print(a4);
    Arrays2.print("a4 = ", a4);
    Arrays2.print(a4, size/3, size/3 + size/3);
    Arrays2.fill(a5,
      new Arrays2.RandIntGenerator());
    Arrays2.print(a5);
    Arrays2.print("a5 = ", a5);
    Arrays2.print(a5, size/3, size/3 + size/3);
    Arrays2.fill(a6,
      new Arrays2.RandLongGenerator());
    Arrays2.print(a6);
    Arrays2.print("a6 = ", a6);
    Arrays2.print(a6, size/3, size/3 + size/3);
    Arrays2.fill(a7,
      new Arrays2.RandFloatGenerator());
    Arrays2.print(a7);
    Arrays2.print("a7 = ", a7);
    Arrays2.print(a7, size/3, size/3 + size/3);
    Arrays2.fill(a8,
      new Arrays2.RandDoubleGenerator());
    Arrays2.print(a8);
    Arrays2.print("a8 = ", a8);
    Arrays2.print(a8, size/3, size/3 + size/3);
    Arrays2.fill(a9,
      new Arrays2.RandStringGenerator(7));
    Arrays2.print(a9);
    Arrays2.print("a9 = ", a9);
    Arrays2.print(a9, size/3, size/3 + size/3);
  }
} ///:~

The size parameter has a default value, but you can also set it from the command line. [ Add Comment ]

Filling an array

The Java standard library Arrays also has a fill( ) method, but that is rather trivial—it only duplicates a single value into each location, or in the case of objects, copies the same reference into each location. Using Arrays2.print( ), the Arrays.fill( ) methods can be easily demonstrated:

//: c09:FillingArrays.java
// Using Arrays.fill()
import com.bruceeckel.util.*;
import java.util.*;

public class FillingArrays {
  public static void main(String[] args) {
    int size = 6;
    // Or get the size from the command line:
    if(args.length != 0)
      size = Integer.parseInt(args[0]);
    boolean[] a1 = new boolean[size];
    byte[] a2 = new byte[size];
    char[] a3 = new char[size];
    short[] a4 = new short[size];
    int[] a5 = new int[size];
    long[] a6 = new long[size];
    float[] a7 = new float[size];
    double[] a8 = new double[size];
    String[] a9 = new String[size];
    Arrays.fill(a1, true);
    Arrays2.print("a1 = ", a1);
    Arrays.fill(a2, (byte)11);
    Arrays2.print("a2 = ", a2);
    Arrays.fill(a3, 'x');
    Arrays2.print("a3 = ", a3);
    Arrays.fill(a4, (short)17);
    Arrays2.print("a4 = ", a4);
    Arrays.fill(a5, 19);
    Arrays2.print("a5 = ", a5);
    Arrays.fill(a6, 23);
    Arrays2.print("a6 = ", a6);
    Arrays.fill(a7, 29);
    Arrays2.print("a7 = ", a7);
    Arrays.fill(a8, 47);
    Arrays2.print("a8 = ", a8);
    Arrays.fill(a9, "Hello");
    Arrays2.print("a9 = ", a9);
    // Manipulating ranges:
    Arrays.fill(a9, 3, 5, "World");
    Arrays2.print("a9 = ", a9);
  }
} ///:~

You can either fill the entire array, or—as the last two statements show—a range of elements. But since you can only provide a single value to use for filling using Arrays.fill( ), the Arrays2.fill( ) methods produce much more interesting results. [ Add Comment ]

Copying an array

The Java standard library provides a static method, System.arraycopy( ), which can make much faster copies of an array than if you use a for loop to perform the copy by hand. System.arraycopy( ) is overloaded to handle all types. Here’s an example that manipulates arrays of int:

//: c09:CopyingArrays.java
// Using System.arraycopy()
import com.bruceeckel.util.*;
import java.util.*;

public class CopyingArrays {
  public static void main(String[] args) {
    int[] i = new int[25];
    int[] j = new int[25];
    Arrays.fill(i, 47);
    Arrays.fill(j, 99);
    Arrays2.print("i = ", i);
    Arrays2.print("j = ", j);
    System.arraycopy(i, 0, j, 0, i.length);
    Arrays2.print("j = ", j);
    int[] k = new int[10];
    Arrays.fill(k, 103);
    System.arraycopy(i, 0, k, 0, k.length);
    Arrays2.print("k = ", k);
    Arrays.fill(k, 103);
    System.arraycopy(k, 0, i, 0, k.length);
    Arrays2.print("i = ", i);
    // Objects:
    Integer[] u = new Integer[10];
    Integer[] v = new Integer[5];
    Arrays.fill(u, new Integer(47));
    Arrays.fill(v, new Integer(99));
    Arrays2.print("u = ", u);
    Arrays2.print("v = ", v);
    System.arraycopy(v, 0, 
      u, u.length/2, v.length);
    Arrays2.print("u = ", u);
  }
} ///:~

The arguments to arraycopy( ) are the source array, the offset into the source array from whence to start copying, the destination array, the offset into the destination array where the copying begins, and the number of elements to copy. Naturally, any violation of the array boundaries will cause an exception. [ Add Comment ]

The example shows that both primitive arrays and object arrays can be copied. However, if you copy arrays of objects then only the references get copied—there’s no duplication of the objects themselves. This is called a shallow copy (see Appendix A). [ Add Comment ]

Comparing arrays

Arrays provides the overloaded method equals( ) to compare entire arrays for equality. Again, these are overloaded for all the primitives, and for Object. To be equal, the arrays must have the same number of elements and each element must be equivalent to each corresponding element in the other array, using the equals( ) for each element. (For primitives, that primitive’s wrapper class equals( ) is used; for example, Integer.equals( ) for int.) Here’s an example:

//: c09:ComparingArrays.java
// Using Arrays.equals()
import java.util.*;

public class ComparingArrays {
  public static void main(String[] args) {
    int[] a1 = new int[10];
    int[] a2 = new int[10];
    Arrays.fill(a1, 47);
    Arrays.fill(a2, 47);
    System.out.println(Arrays.equals(a1, a2));
    a2[3] = 11;
    System.out.println(Arrays.equals(a1, a2));
    String[] s1 = new String[5];
    Arrays.fill(s1, "Hi");
    String[] s2 = {"Hi", "Hi", "Hi", "Hi", "Hi"};
    System.out.println(Arrays.equals(s1, s2));
  }
} ///:~

Originally, a1 and a2 are exactly equal, so the output is “true,” but then one of the elements is changed so the second line of output is “false.” In the last case, all the elements of s1 point to the same object, but s2 has five unique objects. However, array equality is based on contents (via Object.equals( )) and so the result is “true.” [ Add Comment ]

Array element comparisons

One of the missing features in the Java 1.0 and 1.1 libraries is algorithmic operations—even simple sorting. This was a rather confusing situation to someone expecting an adequate standard library. Fortunately, Java 2 remedies the situation, at least for the sorting problem. [ Add Comment ]

A problem with writing generic sorting code is that sorting must perform comparisons based on the actual type of the object. Of course, one approach is to write a different sorting method for every different type, but you should be able to recognize that this does not produce code that is easily reused for new types. [ Add Comment ]

A primary goal of programming design is to “separate things that change from things that stay the same,” and here, the code that stays the same is the general sort algorithm, but the thing that changes from one use to the next is the way objects are compared. So instead of hard-wiring the comparison code into many different sort routines, the technique of the callback is used. With a callback, the part of the code that varies from case to case is encapsulated inside its own class, and the part of the code that’s always the same will call back to the code that changes. That way you can make different objects to express different ways of comparison and feed them to the same sorting code. [ Add Comment ]

In Java 2, there are two ways to provide comparison functionality. The first is with the natural comparison method that is imparted to a class by implementing the java.lang.Comparable interface. This is a very simple interface with a single method, compareTo( ). This method takes another Object as an argument, and produces a negative value if the argument is less than the current object is less than the argument, zero if the argument is equal, and a positive value if the current object is greater than the argument is greater than the current object. [ Add Comment ]

Here’s a class that implements Comparable and demonstrates the comparability by using the Java standard library method Arrays.sort( ):

//: c09:CompType.java
// Implementing Comparable in a class.
import com.bruceeckel.util.*;
import java.util.*;

public class CompType implements Comparable {
  int i;
  int j;
  public CompType(int n1, int n2) { 
    i = n1;
    j = n2;
  }
  public String toString() { 
    return "[i = " + i + ", j = " + j + "]";
  }
  public int compareTo(Object rv) {
    int rvi = ((CompType)rv).i;
    return (i < rvi ? -1 : (i == rvi ? 0 : 1));
  }
  private static Random r = new Random();
  private static int randInt() {
    return Math.abs(r.nextInt()) % 100;
  }
  public static Generator generator() {
    return new Generator() {
      public Object next() {
        return new CompType(randInt(),randInt());
      }
    };
  }
  public static void main(String[] args) {
    CompType[] a = new CompType[10];
    Arrays2.fill(a, generator());
    Arrays2.print("before sorting, a = ", a);
    Arrays.sort(a);
    Arrays2.print("after sorting, a = ", a);
  }
} ///:~

When you define the comparison function, you are responsible for deciding what it means to compare one of your objects to another. Here, only the i values are used in the comparison, and the j values are ignored. [ Add Comment ]

The static randInt( ) method produces positive values between zero and 100, and the generator( ) method produces an object that implements the Generator interface, by creating an anonymous inner class (see Chapter 8). This builds CompType objects by initializing them with random values. In main( ), the generator is used to fill an array of CompType, which is then sorted. If Comparable hadn’t been implemented, then you’d get a compile-time error message when you tried to call sort( ). [ Add Comment ]

Now suppose someone hands you a class that doesn’t implement Comparable, or they hand you this class that does implement Comparable, but you decide you don’t like the way it works and would rather have a different comparison function for the type. To do this, you use the second approach for comparing objects, by creating a separate class that implements an interface called Comparator. This has two methods, compare( ) and equals( ). However, you don’t have to implement equals( ) except for special performance needs, because anytime you create a class it is implicitly inherited from Object, which has an equals( ). So you can just use the default Object equals( ) and satisfy the contract imposed by the interface. [ Add Comment ]

The Collections class (which we’ll look at more later) contains a single Comparator that reverses the natural sorting order. This can easily be applied to the CompType: [ Add Comment ]

//: c09:Reverse.java
// The Collecions.reverseOrder() Comparator.
import com.bruceeckel.util.*;
import java.util.*;

public class Reverse {
  public static void main(String[] args) {
    CompType[] a = new CompType[10];
    Arrays2.fill(a, CompType.generator());
    Arrays2.print("before sorting, a = ", a);
    Arrays.sort(a, Collections.reverseOrder());
    Arrays2.print("after sorting, a = ", a);
  }
} ///:~

The call to Collections.reverseOrder( ) produces the reference to the Comparator. [ Add Comment ]

As a second example, the following Comparator compares CompType objects based on their j values rather than their i values:

//: c09:ComparatorTest.java
// Implementing a Comparator for a class.
import com.bruceeckel.util.*;
import java.util.*;

class CompTypeComparator implements Comparator {
  public int compare(Object o1, Object o2) {
    int j1 = ((CompType)o1).j;
    int j2 = ((CompType)o2).j;
    return (j1 < j2 ? -1 : (j1 == j2 ? 0 : 1));
  }
}
           
public class ComparatorTest {
  public static void main(String[] args) {
    CompType[] a = new CompType[10];
    Arrays2.fill(a, CompType.generator());
    Arrays2.print("before sorting, a = ", a);
    Arrays.sort(a, new CompTypeComparator());
    Arrays2.print("after sorting, a = ", a);
  }
} ///:~

The compare( ) method must return a negative integer, zero, or a positive integer if the first argument is less than, equal to, or greater than the second, respectively. [ Add Comment ]

Sorting an array

With the built-in sorting methods, you can sort any array of primitives, and any array of objects that either implements Comparable or has an associated Comparator. This fills a big hole in the Java libraries—believe it or not, there was no support in Java 1.0 or 1.1 for sorting Strings! Here’s an example that generates random String objects and sorts them:

//: c09:StringSorting.java
// Sorting an array of Strings.
import com.bruceeckel.util.*;
import java.util.*;

public class StringSorting {
  public static void main(String[] args) {
    String[] sa = new String[30];
    Arrays2.fill(sa,
      new Arrays2.RandStringGenerator(5));
    Arrays2.print("Before sorting: ", sa);
    Arrays.sort(sa);
    Arrays2.print("After sorting: ", sa);
  }
} ///:~

One thing you’ll notice about the output in the String sorting algorithm is that it’s lexicographic, so it puts all the words starting with uppercase letters first, followed by all the words starting with lowercase letters. (Telephone books are typically sorted this way.) You may also want to group the words together regardless of case, and you can do this by defining a Comparator class, thereby overriding the default String Comparable behavior. For reuse, this will be added to the “util” package: [ Add Comment ]

//: com:bruceeckel:util:AlphabeticComparator.java
// Keeping upper and lowercase letters together.
package com.bruceeckel.util;
import java.util.*;

public class AlphabeticComparator 
implements Comparator{
  public int compare(Object o1, Object o2) {
    String s1 = (String)o1;
    String s2 = (String)o2;
    return s1.toLowerCase().compareTo(
      s2.toLowerCase());
  }
} ///:~

Each String is converted to lowercase before the comparison. String’s built-in compareTo( ) method provides the desired functionality. [ Add Comment ]

Here’s a test using AlphabeticComparator:

//: c09:AlphabeticSorting.java
// Keeping upper and lowercase letters together.
import com.bruceeckel.util.*;
import java.util.*;

public class AlphabeticSorting {
  public static void main(String[] args) {
    String[] sa = new String[30];
    Arrays2.fill(sa,
      new Arrays2.RandStringGenerator(5));
    Arrays2.print("Before sorting: ", sa);
    Arrays.sort(sa, new AlphabeticComparator());
    Arrays2.print("After sorting: ", sa);
  }
} ///:~

The sorting algorithm that’s used in the Java standard library is designed to be optimal for the particular type you’re sorting—a Quicksort for primitives, and a stable merge sort for objects. So you shouldn’t need to spend any time worrying about performance unless your profiling tool points you to the sorting process as a bottleneck. [ Add Comment ]

Searching a sorted array

Once an array is sorted, you can perform a fast search for a particular item using Arrays.binarySearch( ). However, it’s very important that you do not try to use binarySearch( ) on an unsorted array; the results will be unpredictable. The following example uses a RandIntGenerator to fill an array, then to produces values to search for: [ Add Comment ]

//: c09:ArraySearching.java
// Using Arrays.binarySearch().
import com.bruceeckel.util.*;
import java.util.*;

public class ArraySearching {
  public static void main(String[] args) {
    int[] a = new int[100];
    Arrays2.RandIntGenerator gen = 
      new Arrays2.RandIntGenerator(1000);
    Arrays2.fill(a, gen);
    Arrays.sort(a);
    Arrays2.print("Sorted array: ", a);
    while(true) {
      int r = gen.next();
      int location = Arrays.binarySearch(a, r);
      if(location >= 0) {
        System.out.println("Location of " + r + 
          " is " + location + ", a[" + 
          location + "] = " + a[location]);
        break; // Out of while loop
      }
    }
  }
} ///:~

In the while loop, random values are generated as search items, until one of them is found. [ Add Comment ]

Arrays.binarySearch( ) produces a value greater than or equal to zero if the search item is found. Otherwise, it produces a negative value representing the place that the element should be inserted if you are maintaining the sorted array by hand. The value produced is

-(insertion point) - 1

The insertion point is the index of the first element greater than the key, or a.size( ), if all elements in the array are less than the specified key. [ Add Comment ]

If the array contains duplicate elements, there is no guarantee which one will be found. The algorithm is thus not really designed to support duplicate elements, as much as tolerate them. If you need a sorted list of nonduplicated elements, however, use a TreeSet, which will be introduced later in this chapter. This takes care of all the details for you automatically. Only in cases of performance bottlenecks should you replace the TreeSet with a hand-maintained array. [ Add Comment ]

If you have sorted an object array using a Comparator (primitive arrays do not allow sorting with a Comparator), you must include that same Comparator when you perform a binarySearch( ) (using the overloaded version of the function that’s provided). For example, the AlphabeticSorting.java program can be modified to perform a search:

//: c09:AlphabeticSearch.java
// Searching with a Comparator.
import com.bruceeckel.util.*;
import java.util.*;

public class AlphabeticSearch {
  public static void main(String[] args) {
    String[] sa = new String[30];
    Arrays2.fill(sa,
      new Arrays2.RandStringGenerator(5));
    AlphabeticComparator comp =
      new AlphabeticComparator();
    Arrays.sort(sa, comp);
    int index =
      Arrays.binarySearch(sa, sa[10], comp);
    System.out.println("Index = " + index);
  }
} ///:~

The Comparator must be passed to the overloaded binarySearch( ) as the third argument. In the above example, success is guaranteed because the search item is plucked out of the array itself. [ Add Comment ]

Array summary

To summarize what you’ve seen so far, your first and most efficient choice to hold a group of objects should be an array, and you’re forced into this choice if you want to hold a group of primitives. In the remainder of this chapter we’ll look at the more general case, when you don’t know at the time you’re writing the program how many objects you’re going to need, or if you need a more sophisticated way to store your objects. Java provides a library of container classes to solve this problem, the basic types of which are List, Set, and Map. You can solve a surprising number of problems using these tools. [ Add Comment ]

Among their other characteristics—Set, for example, holds only one object of each value, and Map is an associative array that lets you associate any object with any other object—the Java container classes will automatically resize themselves. So, unlike arrays, you can put in any number of objects and you don’t need to worry about how big to make the container while you’re writing the program. [ Add Comment ]

Introduction to containers

To me, container classes are one of the most powerful tools for raw development because they significantly increase your programming muscle. The Java 2 containers represent a thorough redesign[47] of the rather poor showings in Java 1.0 and 1.1. Some of the redesign makes things tighter and more sensible. It also fills out the functionality of the containers library, providing the behavior of linked lists, queues, and deques (double-ended queues, pronounced “decks”). [ Add Comment ]

The design of a containers library is difficult (true of most library design problems). In C++, the container classes covered the bases with many different classes. This was better than what was available prior to the C++ container classes (nothing), but it didn’t translate well into Java. On the other extreme, I’ve seen a containers library that consists of a single class, “container,” which acts like both a linear sequence and an associative array at the same time. The Java 2 container library strikes a balance: the full functionality that you expect from a mature container library, but easier to learn and use than the C++ container classes and other similar container libraries. The result can seem a bit odd in places. Unlike some of the decisions made in the early Java libraries, these oddities were not accidents, but carefully considered decisions based on trade-offs in complexity. It might take you a little while to get comfortable with some aspects of the library, but I think you’ll find yourself rapidly acquiring and using these new tools. [ Add Comment ]

The Java 2 container library takes the issue of “holding your objects” and divides it into two distinct concepts:

  1. Collection: a group of individual elements, often with some rule applied to them. A List must hold the elements in a particular sequence, and a Set cannot have any duplicate elements. (A bag, which is not implemented in the Java container library—since Lists provide you with enough of that functionality—has no such rules.)Add Comment ]
  2. Map: a group of key-value object pairs. At first glance, this might seem like it ought to be a Collection of pairs, but when you try to implement it that way the design gets awkward, so it’s clearer to make it a separate concept. On the other hand, it’s convenient to look at portions of a Map by creating a Collection to represent that portion. Thus, a Map can return a Set of its keys, a Collection of its values, or a Set of its pairs. Maps, like arrays, can easily be expanded to multiple dimensions without adding new concepts: you simply make a Map whose values are Maps (and the values of those Maps can be Maps, etc.).Add Comment ]

We will first look at the general features of containers, then go into details, and finally learn why there are different versions of some containers, and how to choose between them. [ Add Comment ]

Printing containers

Unlike arrays, the containers print nicely without any help. Here’s an example that also introduces you to the basic types of containers:

//: c09:PrintingContainers.java
// Containers print themselves automatically.
import java.util.*;

public class PrintingContainers {
  static Collection fill(Collection c) {
    c.add("dog");
    c.add("dog");
    c.add("cat");
    return c;
  }
  static Map fill(Map m) {
    m.put("dog", "Bosco");
    m.put("dog", "Spot");
    m.put("cat", "Rags");
    return m;
  }
  public static void main(String[] args) {
    System.out.println(fill(new ArrayList()));
    System.out.println(fill(new HashSet()));
    System.out.println(fill(new HashMap()));
  }
} ///:~

As mentioned before, there are two basic categories in the Java container library. The distinction is based on the number of items that are held in each location of the container. The Collection category only holds one item in each location (the name is a bit misleading since entire container libraries are often called “collections”). It includes the List, which holds a group of items in a specified sequence, and the Set, which only allows the addition of one item of each type. The ArrayList is a type of List, and HashSet is a type of Set. To add items to any Collection, there’s an add( ) method. [ Add Comment ]

The Map holds key-value pairs, rather like a mini database. The above program uses one flavor of Map, the HashMap. If you have a Map that associates states with their capitals and you want to know the capital of Ohio, you look it up—almost as if you were indexing into an array. (Maps are also called associative arrays.) To add elements to a Map there’s a put( ) method that takes a key and a value as arguments. The above example only shows adding elements and does not look the elements up after they’re added. That will be shown later. [ Add Comment ]

The overloaded fill( ) methods fill Collections and Maps, respectively. If you look at the output, you can see that the default printing behavior (provided via the container’s various toString( ) methods) produces quite readable results, so no additional printing support is necessary as it was with arrays:

[dog, dog, cat]
[cat, dog]
{cat=Rags, dog=Spot}

A Collection is printed surrounded by square braces, with each element separated by a comma. A Map is surrounded by curly braces, with each key and value associated with an equal sign (keys on the left, values on the right). [ Add Comment ]

You can also immediately see the basic behavior of the different containers. The List holds the objects exactly as they are entered, without any reordering or editing. The Set, however, only accepts one of each object and it uses its own internal ordering method (in general, you are only concerned with whether or not something is a member of the Set, not the order in which it appears—for that you’d use a List). And the Map also only accepts one of each type of item, based on the key, and it also has its own internal ordering and does not care about the order in which you enter the items. [ Add Comment ]

Filling containers

Although the problem of printing the containers is taken care of, filling containers suffers from the same deficiency as java.util.Arrays. Just like Arrays, there is a companion class called Collections containing static utility methods including one called fill( ). This fill( ) also just duplicates a single object reference throughout the container, and also only works for List objects and not Sets or Maps:

//: c09:FillingLists.java
// The Collections.fill() method.
import java.util.*;

public class FillingLists {
  public static void main(String[] args) {
    List list = new ArrayList();
    for(int i = 0; i < 10; i++)
      list.add("");
    Collections.fill(list, "Hello");
    System.out.println(list);
  }
} ///:~

This method is made even less useful by the fact that it can only replace elements that are already in the List, and will not add new elements. [ Add Comment ]

To be able to create interesting examples, here is a complementary Collections2 library (part of com.bruceeckel.util for convenience) with a fill( ) method that uses a generator to add elements, and allows you to specify the number of elements you want to add( ). The Generator interface defined previously will work for Collections, but the Map requires its own generator interface since a pair of objects (one key and one value) must be produced by each call to next( ). Here is the Pair class:

//: com:bruceeckel:util:Pair.java
package com.bruceeckel.util;
public class Pair {
  public Object key, value;
  Pair(Object k, Object v) {
    key = k;
    value = v;
  }
} ///:~

Next, the generator interface that produces the Pair:

//: com:bruceeckel:util:MapGenerator.java
package com.bruceeckel.util;
public interface MapGenerator {
  Pair next();
} ///:~

With these, a set of utilities for working with the container classes can be developed:

//: com:bruceeckel:util:Collections2.java
// To fill any type of container 
// using a generator object.
package com.bruceeckel.util;
import java.util.*;

public class Collections2 {
  // Fill an array using a generator:
  public static void 
  fill(Collection c, Generator gen, int count) {
    for(int i = 0; i < count; i++)
      c.add(gen.next());
  }
  public static void 
  fill(Map m, MapGenerator gen, int count) {
    for(int i = 0; i < count; i++) {
      Pair p = gen.next();
      m.put(p.key, p.value);
    }
  }
  public static class RandStringPairGenerator
  implements MapGenerator {
    private Arrays2.RandStringGenerator gen;
    public RandStringPairGenerator(int len) {
      gen = new Arrays2.RandStringGenerator(len);
    }
    public Pair next() {
      return new Pair(gen.next(), gen.next());
    }
  }
  // Default object so you don't have 
  // to create your own:
  public static RandStringPairGenerator rsp =
    new RandStringPairGenerator(10);
  public static class StringPairGenerator
  implements MapGenerator {
    private int index = -1;
    private String[][] d;
    public StringPairGenerator(String[][] data) {
      d = data;
    }
    public Pair next() {
      // Force the index to wrap:
      index = (index + 1) % d.length;
      return new Pair(d[index][0], d[index][1]);
    }
    public StringPairGenerator reset() { 
      index = -1; 
      return this;
    }
  }
  // Use a predefined dataset:
  public static StringPairGenerator geography =
    new StringPairGenerator(
      CountryCapitals.pairs);
  // Produce a sequence from a 2D array:
  public static class StringGenerator
  implements Generator {
    private String[][] d;
    private int position;
    private int index = -1;
    public 
    StringGenerator(String[][] data, int pos) {
      d = data;
      position = pos;
    }
    public Object next() {
      // Force the index to wrap:
      index = (index + 1) % d.length;
      return d[index][position];
    }
    public StringGenerator reset() { 
      index = -1;
      return this;
    }
  }
  // Use a predefined dataset:
  public static StringGenerator countries =
    new StringGenerator(CountryCapitals.pairs,0);
  public static StringGenerator capitals =
    new StringGenerator(CountryCapitals.pairs,1);
} ///:~

Both versions of fill( ) take an argument that determines the number of items to add to the container. In addition, there are two generators for the map: RandStringPairGenerator, which creates any number of pairs of gibberish Strings with length determined by the constructor argument; and StringPairGenerator, which produces pairs of Strings given a two-dimensional array of String. The StringGenerator also takes a two-dimensional array of String but generates single items rather than Pairs. The static rsp, geography, countries, and capitals objects provide prebuilt generators, the last three using all the countries of the world and their capitals. Note that if you try to create more pairs than are available, the generators will loop around to the beginning, and if you are putting the pairs into a Map, the duplicates will just be ignored. [ Add Comment ]

Here is the predefined dataset, which consists of country names and their capitals. It is set in a small font to prevent taking up unnecessary space:

//: com:bruceeckel:util:CountryCapitals.java
package com.bruceeckel.util;
public class CountryCapitals {
  public static final String[][] pairs = {
    // Africa
    {"ALGERIA","Algiers"}, {"ANGOLA","Luanda"},
    {"BENIN","Porto-Novo"}, {"BOTSWANA","Gaberone"},
    {"BURKINA FASO","Ouagadougou"}, {"BURUNDI","Bujumbura"},
    {"CAMEROON","Yaounde"}, {"CAPE VERDE","Praia"},
    {"CENTRAL AFRICAN REPUBLIC","Bangui"},
    {"CHAD","N'djamena"},  {"COMOROS","Moroni"},
    {"CONGO","Brazzaville"}, {"DJIBOUTI","Dijibouti"},
    {"EGYPT","Cairo"}, {"EQUATORIAL GUINEA","Malabo"},
    {"ERITREA","Asmara"}, {"ETHIOPIA","Addis Ababa"},
    {"GABON","Libreville"}, {"THE GAMBIA","Banjul"},
    {"GHANA","Accra"}, {"GUINEA","Conakry"},
    {"GUINEA","-"}, {"BISSAU","Bissau"},
    {"CETE D'IVOIR (IVORY COAST)","Yamoussoukro"},
    {"KENYA","Nairobi"}, {"LESOTHO","Maseru"},
    {"LIBERIA","Monrovia"}, {"LIBYA","Tripoli"},
    {"MADAGASCAR","Antananarivo"}, {"MALAWI","Lilongwe"},
    {"MALI","Bamako"}, {"MAURITANIA","Nouakchott"},
    {"MAURITIUS","Port Louis"}, {"MOROCCO","Rabat"},
    {"MOZAMBIQUE","Maputo"}, {"NAMIBIA","Windhoek"},
    {"NIGER","Niamey"}, {"NIGERIA","Abuja"},
    {"RWANDA","Kigali"}, {"SAO TOME E PRINCIPE","Sao Tome"},
    {"SENEGAL","Dakar"}, {"SEYCHELLES","Victoria"},
    {"SIERRA LEONE","Freetown"}, {"SOMALIA","Mogadishu"},
    {"SOUTH AFRICA","Pretoria/Cape Town"}, {"SUDAN","Khartoum"},
    {"SWAZILAND","Mbabane"}, {"TANZANIA","Dodoma"},
    {"TOGO","Lome"}, {"TUNISIA","Tunis"},
    {"UGANDA","Kampala"},
    {"DEMOCRATIC REPUBLIC OF THE CONGO (ZAIRE)","Kinshasa"},
    {"ZAMBIA","Lusaka"}, {"ZIMBABWE","Harare"},
    // Asia
    {"AFGHANISTAN","Kabul"}, {"BAHRAIN","Manama"},
    {"BANGLADESH","Dhaka"}, {"BHUTAN","Thimphu"},
    {"BRUNEI","Bandar Seri Begawan"}, {"CAMBODIA","Phnom Penh"},
    {"CHINA","Beijing"}, {"CYPRUS","Nicosia"},
    {"INDIA","New Delhi"}, {"INDONESIA","Jakarta"},
    {"IRAN","Tehran"}, {"IRAQ","Baghdad"},
    {"ISRAEL","Jerusalem"}, {"JAPAN","Tokyo"},
    {"JORDAN","Amman"}, {"KUWAIT","Kuwait City"},
    {"LAOS","Vientiane"}, {"LEBANON","Beirut"},
    {"MALAYSIA","Kuala Lumpur"}, {"THE MALDIVES","Male"},
    {"MONGOLIA","Ulan Bator"}, {"MYANMAR (BURMA)","Rangoon"},
    {"NEPAL","Katmandu"}, {"NORTH KOREA","P'yongyang"},
    {"OMAN","Muscat"}, {"PAKISTAN","Islamabad"},
    {"PHILIPPINES","Manila"}, {"QATAR","Doha"},
    {"SAUDI ARABIA","Riyadh"}, {"SINGAPORE","Singapore"},
    {"SOUTH KOREA","Seoul"}, {"SRI LANKA","Colombo"},
    {"SYRIA","Damascus"}, {"TAIWAN (REPUBLIC OF CHINA)","Taipei"},
    {"THAILAND","Bangkok"}, {"TURKEY","Ankara"},
    {"UNITED ARAB EMIRATES","Abu Dhabi"}, {"VIETNAM","Hanoi"},
    {"YEMEN","Sana'a"},
    // Australia and Oceania
    {"AUSTRALIA","Canberra"}, {"FIJI","Suva"},
    {"KIRIBATI","Bairiki"},
    {"MARSHALL ISLANDS","Dalap-Uliga-Darrit"},
    {"MICRONESIA","Palikir"}, {"NAURU","Yaren"},
    {"NEW ZEALAND","Wellington"}, {"PALAU","Koror"},
    {"PAPUA NEW GUINEA","Port Moresby"},
    {"SOLOMON ISLANDS","Honaira"}, {"TONGA","Nuku'alofa"},
    {"TUVALU","Fongafale"}, {"VANUATU","< Port-Vila"},
    {"WESTERN SAMOA","Apia"},
    // Eastern Europe and former USSR 
    {"ARMENIA","Yerevan"}, {"AZERBAIJAN","Baku"},
    {"BELARUS (BYELORUSSIA)","Minsk"}, {"GEORGIA","Tbilisi"},
    {"KAZAKSTAN","Almaty"}, {"KYRGYZSTAN","Alma-Ata"},
    {"MOLDOVA","Chisinau"}, {"RUSSIA","Moscow"},
    {"TAJIKISTAN","Dushanbe"}, {"TURKMENISTAN","Ashkabad"},
    {"UKRAINE","Kyiv"}, {"UZBEKISTAN","Tashkent"},
    // Europe 
    {"ALBANIA","Tirana"}, {"ANDORRA","Andorra la Vella"},
    {"AUSTRIA","Vienna"}, {"BELGIUM","Brussels"},
    {"BOSNIA","-"}, {"HERZEGOVINA","Sarajevo"},
    {"CROATIA","Zagreb"}, {"CZECH REPUBLIC","Prague"},
    {"DENMARK","Copenhagen"}, {"ESTONIA","Tallinn"},
    {"FINLAND","Helsinki"}, {"FRANCE","Paris"},
    {"GERMANY","Berlin"}, {"GREECE","Athens"},
    {"HUNGARY","Budapest"}, {"ICELAND","Reykjavik"},
    {"IRELAND","Dublin"}, {"ITALY","Rome"},
    {"LATVIA","Riga"}, {"LIECHTENSTEIN","Vaduz"},
    {"LITHUANIA","Vilnius"}, {"LUXEMBOURG","Luxembourg"},
    {"MACEDONIA","Skopje"}, {"MALTA","Valletta"},
    {"MONACO","Monaco"}, {"MONTENEGRO","Podgorica"},
    {"THE NETHERLANDS","Amsterdam"}, {"NORWAY","Oslo"},
    {"POLAND","Warsaw"}, {"PORTUGAL","Lisbon"},
    {"ROMANIA","Bucharest"}, {"SAN MARINO","San Marino"},
    {"SERBIA","Belgrade"}, {"SLOVAKIA","Bratislava"},
    {"SLOVENIA","Ljujiana"}, {"SPAIN","Madrid"},
    {"SWEDEN","Stockholm"}, {"SWITZERLAND","Berne"},
    {"UNITED KINGDOM","London"}, {"VATICAN CITY","---"},
    // North and Central America
    {"ANTIGUA AND BARBUDA","Saint John's"}, {"BAHAMAS","Nassau"},
    {"BARBADOS","Bridgetown"}, {"BELIZE","Belmopan"},
    {"CANADA","Ottawa"}, {"COSTA RICA","San Jose"},
    {"CUBA","Havana"}, {"DOMINICA","Roseau"},
    {"DOMINICAN REPUBLIC","Santo Domingo"},
    {"EL SALVADOR","San Salvador"}, {"GRENADA","Saint George's"},
    {"GUATEMALA","Guatemala City"}, {"HAITI","Port-au-Prince"},
    {"HONDURAS","Tegucigalpa"}, {"JAMAICA","Kingston"},
    {"MEXICO","Mexico City"}, {"NICARAGUA","Managua"},
    {"PANAMA","Panama City"}, {"ST. KITTS","-"},
    {"NEVIS","Basseterre"}, {"ST. LUCIA","Castries"},
    {"ST. VINCENT AND THE GRENADINES","Kingstown"},
    {"UNITED STATES OF AMERICA","Washington, D.C."},
    // South America
    {"ARGENTINA","Buenos Aires"},
    {"BOLIVIA","Sucre (legal)/La Paz(administrative)"},
    {"BRAZIL","Brasilia"}, {"CHILE","Santiago"},
    {"COLOMBIA","Bogota"}, {"ECUADOR","Quito"},
    {"GUYANA","Georgetown"}, {"PARAGUAY","Asuncion"},
    {"PERU","Lima"}, {"SURINAME","Paramaribo"},
    {"TRINIDAD AND TOBAGO","Port of Spain"},
    {"URUGUAY","Montevideo"}, {"VENEZUELA","Caracas"},
  };
} ///:~

This is simply a two-dimensional array of String data[48]. Here’s a simple test using the fill( ) methods and generators:

//: c09:FillTest.java
import com.bruceeckel.util.*;
import java.util.*;

public class FillTest {
  static Generator sg = 
    new Arrays2.RandStringGenerator(7);
  public static void main(String[] args) {
    List list = new ArrayList();
    Collections2.fill(list, sg, 25);
    System.out.println(list + "\n");
    List list2 = new ArrayList();
    Collections2.fill(list2, 
      Collections2.capitals, 25);
    System.out.println(list2 + "\n");
    Set set = new HashSet();
    Collections2.fill(set, sg, 25);
    System.out.println(set + "\n");
    Map m = new HashMap();
    Collections2.fill(m, Collections2.rsp, 25);
    System.out.println(m + "\n");
    Map m2 = new HashMap();
    Collections2.fill(m2, 
      Collections2.geography, 25);
    System.out.println(m2);
  }
} ///:~

With these tools you can easily test the various containers by filling them with interesting data. [ Add Comment ]

Container disadvantage:
unknown type

The “disadvantage” to using the Java containers is that you lose type information when you put an object into a container. This happens because the programmer of that container class had no idea what specific type you wanted to put in the container, and making the container hold only your type would prevent it from being a general-purpose tool. So instead, the container holds references to Object, which is the root of all the classes so it holds any type. (Of course, this doesn’t include primitive types, since they aren’t inherited from anything.) This is a great solution, except: Add Comment ]

  1. Since the type information is thrown away when you put an object reference into a container, there’s no restriction on the type of object that can be put into your container, even if you mean it to hold only, say, cats. Someone could just as easily put a dog into the container. [ Add Comment ]
  2. Since the type information is lost, the only thing the container knows that it holds is a reference to an object. You must perform a cast to the correct type before you use it. [ Add Comment ]

On the up side, Java won’t let you misuse the objects that you put into a container. If you throw a dog into a container of cats and then try to treat everything in the container as a cat, you’ll get a run-time exception when you pull the dog reference out of the cat container and try to cast it to a cat. [ Add Comment ]

Here’s an example using the basic workhorse container, ArrayList. For starters, you can think of ArrayList as “an array that automatically expands itself.” Using an ArrayList is straightforward: create one, put objects in using add( ), and later get them out with get( ) using an index—just like you would with an array but without the square brackets[49]. ArrayList also has a method size( ) to let you know how many elements have been added so you don’t inadvertently run off the end and cause an exception. [ Add Comment ]

First, Cat and Dog classes are created:

//: c09:Cat.java
public class Cat {
  private int catNumber;
  Cat(int i) { catNumber = i; }
  void print() {
    System.out.println("Cat #" + catNumber);
  }
} ///:~

//: c09:Dog.java
public class Dog {
  private int dogNumber;
  Dog(int i) { dogNumber = i; }
  void print() {
    System.out.println("Dog #" + dogNumber);
  }
} ///:~

Cats and Dogs are placed into the container, then pulled out:

//: c09:CatsAndDogs.java
// Simple container example.
import java.util.*;

public class CatsAndDogs {
  public static void main(String[] args) {
    ArrayList cats = new ArrayList();
    for(int i = 0; i < 7; i++)
      cats.add(new Cat(i));
    // Not a problem to add a dog to cats:
    cats.add(new Dog(7));
    for(int i = 0; i < cats.size(); i++)
      ((Cat)cats.get(i)).print();
    // Dog is detected only at run-time
  }
} ///:~

The classes Cat and Dog are distinct—they have nothing in common except that they are Objects. (If you don’t explicitly say what class you’re inheriting from, you automatically inherit from Object.) Since ArrayList holds Objects, you can not only put Cat objects into this container using the ArrayList method add( ), but you can also add Dog objects without complaint at either compile-time or run-time. When you go to fetch out what you think are Cat objects using the ArrayList method get( ), you get back a reference to an object that you must cast to a Cat. Then you need to surround the entire expression with parentheses to force the evaluation of the cast before calling the print( ) method for Cat, otherwise you’ll get a syntax error. Then, at run-time, when you try to cast the Dog object to a Cat, you’ll get an exception. [ Add Comment ]

This is more than just an annoyance. It’s something that can create difficult-to-find bugs. If one part (or several parts) of a program inserts objects into a container, and you discover only in a separate part of the program through an exception that a bad object was placed in the container, then you must find out where the bad insert occurred. On the upside, it’s convenient to start with some standardized container classes for programming, despite the scarcity and awkwardness. [ Add Comment ]

Sometimes it works anyway

It turns out that in some cases things seem to work correctly without casting back to your original type. One case is quite special: the String class has some extra help from the compiler to make it work smoothly. Whenever the compiler expects a String object and it hasn’t got one, it will automatically call the toString( ) method that’s defined in Object and can be overridden by any Java class. This method produces the desired String object, which is then used wherever it was wanted. [ Add Comment ]

Thus, all you need to do to make objects of your class print is to override the toString( ) method, as shown in the following example:

//: c09:Mouse.java
// Overriding toString().
public class Mouse {
  private int mouseNumber;
  Mouse(int i) { mouseNumber = i; }
  // Override Object.toString():
  public String toString() {
    return "This is Mouse #" + mouseNumber;
  }
  public int getNumber() {
    return mouseNumber;
  }
} ///:~

//: c09:WorksAnyway.java
// In special cases, things just 
// seem to work correctly.
import java.util.*;

class MouseTrap {
  static void caughtYa(Object m) {
    Mouse mouse = (Mouse)m; // Cast from Object
    System.out.println("Mouse: " + 
      mouse.getNumber());
  }
}

public class WorksAnyway {
  public static void main(String[] args) {
    ArrayList mice = new ArrayList();
    for(int i = 0; i < 3; i++)
      mice.add(new Mouse(i));
    for(int i = 0; i < mice.size(); i++) {
      // No cast necessary, automatic 
      // call to Object.toString():
      System.out.println(
        "Free mouse: " + mice.get(i));
      MouseTrap.caughtYa(mice.get(i));
    }
  }
} ///:~

You can see toString( ) overridden in Mouse. In the second for loop in main( ) you find the statement:

System.out.println("Free mouse: " + mice.get(i));

After the ‘+’ sign the compiler expects to see a String object. get( ) produces an Object, so to get the desired String the compiler implicitly calls toString( ). Unfortunately, you can work this kind of magic only with String; it isn’t available for any other type. [ Add Comment ]

A second approach to hiding the cast has been placed inside MouseTrap. The caughtYa( ) method accepts not a Mouse, but an Object, which it then casts to a Mouse. This is quite presumptuous, of course, since by accepting an Object anything could be passed to the method. However, if the cast is incorrect—if you passed the wrong type—you’ll get an exception at run-time. This is not as good as compile-time checking but it’s still robust. Note that in the use of this method:

MouseTrap.caughtYa(mice.get(i));

no cast is necessary. [ Add Comment ]

Making a type-conscious ArrayList

You might not want to give up on this issue just yet. A more ironclad solution is to create a new class using the ArrayList, such that it will accept only your type and produce only your type:

//: c09:MouseList.java
// A type-conscious ArrayList.
import java.util.*;

public class MouseList {
  private ArrayList list = new ArrayList();
  public void add(Mouse m) {
    list.add(m);
  }
  public Mouse get(int index) {
    return (Mouse)list.get(index);
  }
  public int size() { return list.size(); }
} ///:~

Here’s a test for the new container:

//: c09:MouseListTest.java
public class MouseListTest {
  public static void main(String[] args) {
    MouseList mice = new MouseList();
    for(int i = 0; i < 3; i++)
      mice.add(new Mouse(i));
    for(int i = 0; i < mice.size(); i++)
      MouseTrap.caughtYa(mice.get(i));
  }
} ///:~

This is similar to the previous example, except that the new MouseList class has a private member of type ArrayList, and methods just like ArrayList. However, it doesn’t accept and produce generic Objects, only Mouse objects. [ Add Comment ]

Note that if MouseList had instead been inherited from ArrayList, the add(Mouse) method would simply overload the existing add(Object) and there would still be no restriction on what type of objects could be added. Thus, the MouseList becomes a surrogate to the ArrayList, performing some activities before passing on the responsibility (see Thinking in Patterns with Java, downloadable at www.BruceEckel.com). [ Add Comment ]

Because a MouseList will accept only a Mouse, if you say:

mice.add(new Pigeon());

you will get an error message at compile-time. This approach, while more tedious from a coding standpoint, will tell you immediately if you’re using a type improperly. [ Add Comment ]

Note that no cast is necessary when using get( )—it’s always a Mouse. [ Add Comment ]

Parameterized types

This kind of problem isn’t isolated—there are numerous cases in which you need to create new types based on other types, and in which it is useful to have specific type information at compile-time. This is the concept of a parameterized type. In C++, this is directly supported by the language with templates. It is likely that a future version of Java will support some variation of parameterized types; the current front-runner automatically creates classes similar to MouseList. [ Add Comment ]

Iterators

In any container class, you must have a way to put things in and a way to get things out. After all, that’s the primary job of a container—to hold things. In the ArrayList, add( ) is the way that you insert objects, and get( ) is one way to get things out. ArrayList is quite flexible—you can select anything at any time, and select multiple elements at once using different indexes.Add Comment ]

If you want to start thinking at a higher level, there’s a drawback: you need to know the exact type of the container in order to use it. This might not seem bad at first, but what if you start out using an ArrayList, and later on in your program you discover that because of the way you are using the container it would be much more efficient to use a LinkedList instead? Or suppose you’d like to write a piece of generic code that doesn’t know or care what type of container it’s working with, so that it could be used on different types of containers without rewriting that code? [ Add Comment ]

The concept of an iterator can be used to achieve this abstraction. An iterator is an object whose job is to move through a sequence of objects and select each object in that sequence without the client programmer knowing or caring about the underlying structure of that sequence. In addition, an iterator is usually what’s called a “light-weight” object: one that’s cheap to create. For that reason, you’ll often find seemingly strange constraints for iterators; for example, some iterators can move in only one direction. [ Add Comment ]

The Java Iterator is an example of an iterator with these kinds of constraints. There’s not much you can do with one except: [ Add Comment ]

  1. Ask a container to hand you an Iterator using a method called iterator( ). This Iterator will be ready to return the first element in the sequence on your first call to its next( ) method.
  2. Get the next object in the sequence with next( ).
  3. See if there are any more objects in the sequence with hasNext( ).
  4. Remove the last element returned by the iterator with remove( ).

That’s all. It’s a simple implementation of an iterator, but still powerful (and there’s a more sophisticated ListIterator for Lists). To see how it works, let’s revisit the CatsAndDogs.java program from earlier in this chapter. In the original version, the method get( ) was used to select each element, but in the following modified version an Iterator is used: [ Add Comment ]

//: c09:CatsAndDogs2.java
// Simple container with Iterator.
import java.util.*;

public class CatsAndDogs2 {
  public static void main(String[] args) {
    ArrayList cats = new ArrayList();
    for(int i = 0; i < 7; i++)
      cats.add(new Cat(i));
    Iterator e = cats.iterator();
    while(e.hasNext())
      ((Cat)e.next()).print();
  }
} ///:~

You can see that the last few lines now use an Iterator to step through the sequence instead of a for loop. With the Iterator, you don’t need to worry about the number of elements in the container. That’s taken care of for you by hasNext( ) and next( ). [ Add Comment ]

As another example, consider the creation of a general-purpose printing method:

//: c09:HamsterMaze.java
// Using an Iterator.
import java.util.*;

class Hamster {
  private int hamsterNumber;
  Hamster(int i) { hamsterNumber = i; }
  public String toString() {
    return "This is Hamster #" + hamsterNumber;
  }
}

class Printer {
  static void printAll(Iterator e) {
    while(e.hasNext())
      System.out.println(e.next());
  }
}

public class HamsterMaze {
  public static void main(String[] args) {
    ArrayList v = new ArrayList();
    for(int i = 0; i < 3; i++)
      v.add(new Hamster(i));
    Printer.printAll(v.iterator());
  }
} ///:~

Look closely at printAll( ). Note that there’s no information about the type of sequence. All you have is an Iterator, and that’s all you need to know about the sequence: that you can get the next object, and that you can know when you’re at the end. This idea of taking a container of objects and passing through it to perform an operation on each one is powerful, and will be seen throughout this book. [ Add Comment ]

The example is even more generic, since it implicitly uses the Object.toString( ) method. The println( ) method is overloaded for all the primitive types as well as Object; in each case a String is automatically produced by calling the appropriate toString( ) method. [ Add Comment ]

Although it’s unnecessary, you can be more explicit using a cast, which has the effect of calling toString( ):

System.out.println((String)e.next());

In general, however, you’ll want to do something more than call Object methods, so you’ll run up against the type-casting issue again. You must assume you’ve gotten an Iterator to a sequence of the particular type you’re interested in, and cast the resulting objects to that type (getting a run-time exception if you’re wrong). [ Add Comment ]

Unintended recursion

Because (like every other class), the Java standard containers are inherited from Object, they contain a toString( ) method. This has been overridden so that they can produce a String representation of themselves, including the objects they hold. Inside ArrayList, for example, the toString( ) steps through the elements of the ArrayList and calls toString( ) for each one. Suppose you’d like to print the address of your class. It seems to make sense to simply refer to this (in particular, C++ programmers are prone to this approach):

//: c09:InfiniteRecursion.java
// Accidental recursion.
import java.util.*;

public class InfiniteRecursion {
  public String toString() {
    return " InfiniteRecursion address: " 
      + this + "\n";
  }
  public static void main(String[] args) {
    ArrayList v = new ArrayList();
    for(int i = 0; i < 10; i++)
      v.add(new InfiniteRecursion());
    System.out.println(v);
  }
} ///:~

If you simply create an InfiniteRecursion object and then print it, you’ll get an endless sequence of exceptions. This is also true if you place the InfiniteRecursion objects in an ArrayList and print that ArrayList as shown here. What’s happening is automatic type conversion for Strings. When you say:

"InfiniteRecursion address: " + this

The compiler sees a String followed by a ‘+’ and something that’s not a String, so it tries to convert this to a String. It does this conversion by calling toString( ), which produces a recursive call. [ Add Comment ]

If you really do want to print the address of the object in this case, the solution is to call the Object toString( ) method, which does just that. So instead of saying this, you’d say super.toString( ). (This only works if you're directly inheriting from Object, or if none of your parent classes have overridden the toString( ) method.) [ Add Comment ]

Container taxonomy

Collections and Maps may be implemented in different ways, according to your programming needs. It’s helpful to look at a diagram of the Java 2 containers:


This diagram can be a bit overwhelming at first, but you’ll see that there are really only three container components: Map, List, and Set, and only two or three implementations of each one (with, typically, a preferred version). When you see this, the containers are not so daunting. [ Add Comment ]

The dotted boxes represent interfaces, the dashed boxes represent abstract classes, and the solid boxes are regular (concrete) classes. The dotted-line arrows indicate that a particular class is implementing an interface (or in the case of an abstract class, partially implementing that interface). The solid arrows show that a class can produce objects of the class the arrow is pointing to. For example, any Collection can produce an Iterator, while a List can produce a ListIterator (as well as an ordinary Iterator, since List is inherited from Collection). [ Add Comment ]

The interfaces that are concerned with holding objects are Collection, List, Set, and Map. Ideally, you’ll write most of your code to talk to these interfaces, and the only place where you’ll specify the precise type you’re using is at the point of creation. So you can create a List like this: [ Add Comment ]

List x = new LinkedList();

Of course, you can also decide to make x a LinkedList (instead of a generic List) and carry the precise type information around with x. The beauty (and the intent) of using the interface is that if you decide you want to change your implementation, all you need to do is change it at the point of creation, like this:

List x = new ArrayList();

The rest of your code can remain untouched (some of this genericity can also be achieved with iterators). [ Add Comment ]

In the class hierarchy, you can see a number of classes whose names begin with “Abstract,” and these can seem a bit confusing at first. They are simply tools that partially implement a particular interface. If you were making your own Set, for example, you wouldn’t start with the Set interface and implement all the methods, instead you’d inherit from AbstractSet and do the minimal necessary work to make your new class. However, the containers library contains enough functionality to satisfy your needs virtually all the time. So for our purposes, you can ignore any class that begins with “Abstract.” [ Add Comment ]

Therefore, when you look at the diagram, you’re really concerned with only those interfaces at the top of the diagram and the concrete classes (those with solid boxes around them). You’ll typically make an object of a concrete class, upcast it to the corresponding interface, and then use the interface throughout the rest of your code. In addition, you do not need to consider the legacy elements when writing new code. Therefore, the diagram can be greatly simplified to look like this:


Now it only includes the interfaces and classes that you will encounter on a regular basis, and also the elements that we will focus on in this chapter. [ Add Comment ]

Here’s a simple example, which fills a Collection (represented here with an ArrayList) with String objects, and then prints each element in the Collection:

//: c09:SimpleCollection.java
// A simple example using Java 2 Collections.
import java.util.*;

public class SimpleCollection {
  public static void main(String[] args) {
    // Upcast because we just want to
    // work with Collection features
    Collection c = new ArrayList();
    for(int i = 0; i < 10; i++)
      c.add(Integer.toString(i));
    Iterator it = c.iterator();
    while(it.hasNext())
      System.out.println(it.next());
  }
} ///:~

The first line in main( ) creates an ArrayList object and then upcasts it to a Collection. Since this example uses only the Collection methods, any object of a class inherited from Collection would work, but ArrayList is the typical workhorse Collection. [ Add Comment ]

The add( ) method, as its name suggests, puts a new element in the Collection. However, the documentation carefully states that add( ) “ensures that this Container contains the specified element.” This is to allow for the meaning of Set, which adds the element only if it isn’t already there. With an ArrayList, or any sort of List, add( ) always means “put it in,” because Lists don’t care if there are duplicates. [ Add Comment ]

All Collections can produce an Iterator via their iterator( ) method. Here, an Iterator is created and used to traverse the Collection, printing each element. [ Add Comment ]

Collection functionality

The following table shows everything you can do with a Collection (not including the methods that automatically come through with Object), and thus, everything you can do with a Set or a List. (List also has additional functionality.) Maps are not inherited from Collection, and will be treated separately.

boolean add(Object)

Ensures that the container holds the argument. Returns false if it doesn’t add the argument. (This is an “optional” method, described later in this chapter.)

boolean
addAll(Collection)

Adds all the elements in the argument. Returns true if any elements were added. (“Optional.”)

void clear( )

Removes all the elements in the container. (“Optional.”)

boolean
contains(Object)

true if the container holds the argument.

boolean containsAll(Collection)

true if the container holds all the elements in the argument.

boolean isEmpty( )

true if the container has no elements.

Iterator iterator( )

Returns an Iterator that you can use to move through the elements in the container.

boolean
remove(Object)

If the argument is in the container, one instance of that element is removed. Returns true if a removal occurred. (“Optional.”)

boolean removeAll(Collection)

Removes all the elements that are contained in the argument. Returns true if any removals occurred. (“Optional.”)

boolean retainAll(Collection)

Retains only elements that are contained in the argument (an “intersection” from set theory). Returns true if any changes occurred. (“Optional.”)

int size( )

Returns the number of elements in the container.

Object[] toArray( )

Returns an array containing all the elements in the container.

Object[]
toArray(Object[] a)

Returns an array containing all the elements in the container, whose type is that of the array a rather than plain Object (you must cast the array to the right type).

Notice that there’s no get( ) function for random-access element selection. That’s because Collection also includes Set, which maintains its own internal ordering (and thus makes random-access lookup meaningless). Thus, if you want to examine all the elements of a Collection you must use an iterator; that’s the only way to fetch things back.

The following example demonstrates all of these methods. Again, these work with anything that inherits from Collection, but an ArrayList is used as a kind of “least-common denominator”: [ Add Comment ]

//: c09:Collection1.java
// Things you can do with all Collections.
import java.util.*;
import com.bruceeckel.util.*;

public class Collection1 {
  public static void main(String[] args) {
    Collection c = new ArrayList();
    Collections2.fill(c, 
      Collections2.countries, 10);    
    c.add("ten");
    c.add("eleven");
    System.out.println(c);
    // Make an array from the List:
    Object[] array = c.toArray(); 
    // Make a String array from the List:
    String[] str = 
      (String[])c.toArray(new String[1]);
    // Find max and min elements; this means
    // different things depending on the way
    // the Comparable interface is implemented:
    System.out.println("Collections.max(c) = " +
      Collections.max(c));
    System.out.println("Collections.min(c) = " +
      Collections.min(c));
    // Add a Collection to another Collection
    Collection c2 = new ArrayList();
    Collections2.fill(c2, 
      Collections2.countries, 10);    
    c.addAll(c2);
    System.out.println(c);
    c.remove(CountryCapitals.pairs[0][0]);
    System.out.println(c);
    c.remove(CountryCapitals.pairs[1][0]);
    System.out.println(c);
    // Remove all components that are in the
    // argument collection:
    c.removeAll(c2);
    System.out.println(c);
    c.addAll(c2);
    System.out.println(c);
    // Is an element in this Collection?
    String val = CountryCapitals.pairs[3][0];
    System.out.println(
      "c.contains(" + val  + ") = " 
      + c.contains(val));
    // Is a Collection in this Collection?
    System.out.println(
      "c.containsAll(c2) = "+ c.containsAll(c2));
    Collection c3 = ((List)c).subList(3, 5);
    // Keep all the elements that are in both
    // c2 and c3 (an intersection of sets):
    c2.retainAll(c3);
    System.out.println(c);
    // Throw away all the elements 
    // in c2 that also appear in c3:
    c2.removeAll(c3);
    System.out.println("c.isEmpty() = " +
      c.isEmpty());
    c = new ArrayList();
    Collections2.fill(c, 
      Collections2.countries, 10);    
    System.out.println(c);
    c.clear(); // Remove all elements
    System.out.println("after c.clear():");
    System.out.println(c);
  }
} ///:~

ArrayLists are created containing different sets of data and upcast to Collection objects, so it’s clear that nothing other than the Collection interface is being used. main( ) uses simple exercises to show all of the methods in Collection. [ Add Comment ]

The following sections describe the various implementations of List, Set, and Map and indicate in each case (with an asterisk) which one should be your default choice. You’ll notice that the legacy classes Vector, Stack, and Hashtable are not included because in all cases there are preferred classes within the Java 2 Containers. [ Add Comment ]

List functionality

The basic List is quite simple to use, as you’ve seen so far with ArrayList. Although most of the time you’ll just use add( ) to insert objects, get( ) to get them out one at a time, and iterator( ) to get an Iterator to the sequence, there’s also a set of other methods that can be useful. [ Add Comment ]

In addition, there are actually two types of List: the basic ArrayList, which excels at randomly accessing elements, and the much more powerful LinkedList (which is not designed for fast random access, but has a much more general set of methods).

List (interface)

Order is the most important feature of a List; it promises to maintain elements in a particular sequence. List adds a number of methods to Collection that allow insertion and removal of elements in the middle of a List. (This is recommended only for a LinkedList.) A List will produce a ListIterator, and using this you can traverse the List in both directions, as well as insert and remove elements in the middle of the List.

ArrayList*

A List implemented with an array. Allows rapid random access to elements, but is slow when inserting and removing elements from the middle of a list. ListIterator should be used only for back-and-forth traversal of an ArrayList, but not for inserting and removing elements, which is expensive compared to LinkedList.

LinkedList

Provides optimal sequential access, with inexpensive insertions and deletions from the middle of the List. Relatively slow for random access. (Use ArrayList instead.) Also has addFirst( ), addLast( ), getFirst( ), getLast( ), removeFirst( ), and removeLast( ) (which are not defined in any interfaces or base classes) to allow it to be used as a stack, a queue, and a deque.

The methods in the following example each cover a different group of activities: things that every list can do (basicTest( )), moving around with an Iterator (iterMotion( )) versus changing things with an Iterator (iterManipulation( )), seeing the effects of List manipulation (testVisual( )), and operations available only to LinkedLists.

//: c09:List1.java
// Things you can do with Lists.
import java.util.*;
import com.bruceeckel.util.*;

public class List1 {
  public static List fill(List a) {
    Collections2.countries.reset();
    Collections2.fill(a, 
      Collections2.countries, 10);
    return a;
  }
  static boolean b;
  static Object o;
  static int i;
  static Iterator it;
  static ListIterator lit;
  public static void basicTest(List a) {
    a.add(1, "x"); // Add at location 1
    a.add("x"); // Add at end
    // Add a collection:
    a.addAll(fill(new ArrayList()));
    // Add a collection starting at location 3:
    a.addAll(3, fill(new ArrayList())); 
    b = a.contains("1"); // Is it in there?
    // Is the entire collection in there?
    b = a.containsAll(fill(new ArrayList()));
    // Lists allow random access, which is cheap
    // for ArrayList, expensive for LinkedList:
    o = a.get(1); // Get object at location 1
    i = a.indexOf("1"); // Tell index of object
    b = a.isEmpty(); // Any elements inside?
    it = a.iterator(); // Ordinary Iterator
    lit = a.listIterator(); // ListIterator
    lit = a.listIterator(3); // Start at loc 3
    i = a.lastIndexOf("1"); // Last match 
    a.remove(1); // Remove location 1
    a.remove("3"); // Remove this object
    a.set(1, "y"); // Set location 1 to "y"
    // Keep everything that's in the argument
    // (the intersection of the two sets):
    a.retainAll(fill(new ArrayList()));
    // Remove everything that's in the argument:
    a.removeAll(fill(new ArrayList()));
    i = a.size(); // How big is it?
    a.clear(); // Remove all elements
  }
  public static void iterMotion(List a) {
    ListIterator it = a.listIterator();
    b = it.hasNext();
    b = it.hasPrevious();
    o = it.next();
    i = it.nextIndex();
    o = it.previous();
    i = it.previousIndex();
  }
  public static void iterManipulation(List a) {
    ListIterator it = a.listIterator();
    it.add("47");
    // Must move to an element after add():
    it.next();
    // Remove the element that was just produced:
    it.remove(); 
    // Must move to an element after remove():
    it.next();
    // Change the element that was just produced:
    it.set("47");
  }
  public static void testVisual(List a) {
    System.out.println(a);
    List b = new ArrayList();
    fill(b);
    System.out.print("b = ");
    System.out.println(b);
    a.addAll(b);
    a.addAll(fill(new ArrayList()));
    System.out.println(a);
    // Insert, remove, and replace elements
    // using a ListIterator:
    ListIterator x = a.listIterator(a.size()/2);
    x.add("one"); 
    System.out.println(a);
    System.out.println(x.next());
    x.remove();
    System.out.println(x.next());
    x.set("47");
    System.out.println(a);
    // Traverse the list backwards:
    x = a.listIterator(a.size());
    while(x.hasPrevious())
      System.out.print(x.previous() + " ");
    System.out.println();
    System.out.println("testVisual finished");
  }
  // There are some things that only
  // LinkedLists can do:
  public static void testLinkedList() {
    LinkedList ll = new LinkedList();
    fill(ll);
    System.out.println(ll);
    // Treat it like a stack, pushing:
    ll.addFirst("one");
    ll.addFirst("two");
    System.out.println(ll);
    // Like "peeking" at the top of a stack:
    System.out.println(ll.getFirst());
    // Like popping a stack:
    System.out.println(ll.removeFirst());
    System.out.println(ll.removeFirst());
    // Treat it like a queue, pulling elements
    // off the tail end:
    System.out.println(ll.removeLast());
    // With the above operations, it's a dequeue!
    System.out.println(ll);
  }
  public static void main(String[] args) {
    // Make and fill a new list each time:
    basicTest(fill(new LinkedList()));
    basicTest(fill(new ArrayList()));
    iterMotion(fill(new LinkedList()));
    iterMotion(fill(new ArrayList()));
    iterManipulation(fill(new LinkedList()));
    iterManipulation(fill(new ArrayList()));
    testVisual(fill(new LinkedList()));
    testLinkedList();
  }
} ///:~

In basicTest( ) and iterMotion( ) the calls are simply made to show the proper syntax, and while the return value is captured, it is not used. In some cases, the return value isn’t captured since it isn’t typically used. You should look up the full usage of each of these methods in the online documentation from java.sun.com before you use them. [ Add Comment ]

Making a stack from a LinkedList

A stack is sometimes referred to as a “last-in, first-out” (LIFO) container. That is, whatever you “push” on the stack last is the first item you can “pop” out. Like all of the other containers in Java, what you push and pop are Objects, so you must cast what you pop, unless you’re just using Object behavior. [ Add Comment ]

The LinkedList has methods that directly implement stack functionality, so you can also just use a LinkedList rather than making a stack class. However, a stack class can sometimes tell the story better: [ Add Comment ]

//: c09:StackL.java
// Making a stack from a LinkedList.
import java.util.*;
import com.bruceeckel.util.*;

public class StackL {
  private LinkedList list = new LinkedList();
  public void push(Object v) {
    list.addFirst(v);
  }
  public Object top() { return list.getFirst(); }
  public Object pop() { 
    return list.removeFirst(); 
  }
  public static void main(String[] args) {
    StackL stack = new StackL();
    for(int i = 0; i < 10; i++)
      stack.push(Collections2.countries.next());
    System.out.println(stack.top());
    System.out.println(stack.top());
    System.out.println(stack.pop());
    System.out.println(stack.pop());
    System.out.println(stack.pop());
  }
} ///:~

If you want only stack behavior, inheritance is inappropriate here because it would produce a class with all the rest of the LinkedList methods (you’ll see later that this very mistake was made by the Java 1.0 library designers with Stack). [ Add Comment ]

Making a queue from a LinkedList

A queue is a “first-in, first-out” (FIFO) container. That is, you put things in at one end, and pull them out at the other. So the order in which you put them in will be the same order that they come out. LinkedList has methods to support queue behavior, so these can be used in a Queue class:

//: c09:Queue.java
// Making a queue from a LinkedList.
import java.util.*;

public class Queue {
  private LinkedList list = new LinkedList();
  public void put(Object v) { list.addFirst(v); }
  public Object get() { 
    return list.removeLast(); 
  }
  public boolean isEmpty() { 
    return list.isEmpty(); 
  }
  public static void main(String[] args) {
    Queue queue = new Queue();
    for(int i = 0; i < 10; i++)
      queue.put(Integer.toString(i));
    while(!queue.isEmpty())
      System.out.println(queue.get());
  }
} ///:~

You can also easily create a deque (double-ended queue) from a LinkedList. This is like a queue, but you can add and remove elements from either end. [ Add Comment ]

Set functionality

Set has exactly the same interface as Collection, so there isn’t any extra functionality like there is with the two different Lists. Instead, the Set is exactly a Collection, it just has different behavior. (This is the ideal use of inheritance and polymorphism: to express different behavior.) A Set refuses to hold more than one instance of each object value (what constitutes the “value” of an object is more complex, as you shall see).

Set (interface)

Each element that you add to the Set must be unique; otherwise the Set doesn’t add the duplicate element. Objects added to a Set must define equals( ) to establish object uniqueness. Set has exactly the same interface as Collection. The Set interface does not guarantee it will maintain its elements in any particular order.

HashSet*

For Sets where fast lookup time is important. Objects must also define hashCode( ).

TreeSet

An ordered Set backed by a tree. This way, you can extract an ordered sequence from a Set.

The following example does not show everything you can do with a Set, since the interface is the same as Collection, and so was exercised in the previous example. Instead, this demonstrates the behavior that makes a Set unique:

//: c09:Set1.java
// Things you can do with Sets.
import java.util.*;
import com.bruceeckel.util.*;

public class Set1 {
  static Collections2.StringGenerator gen = 
    Collections2.countries;
  public static void testVisual(Set a) {
    Collections2.fill(a, gen.reset(), 10);    
    Collections2.fill(a, gen.reset(), 10);    
    Collections2.fill(a, gen.reset(), 10);    
    System.out.println(a); // No duplicates!
    // Add another set to this one:
    a.addAll(a);
    a.add("one"); 
    a.add("one"); 
    a.add("one");
    System.out.println(a);
    // Look something up:
    System.out.println("a.contains(\"one\"): " +
      a.contains("one"));
  }
  public static void main(String[] args) {
    System.out.println("HashSet");
    testVisual(new HashSet());
    System.out.println("TreeSet");
    testVisual(new TreeSet());
  }
} ///:~

Duplicate values are added to the Set, but when it is printed you’ll see the Set has accepted only one instance of each value. [ Add Comment ]

When you run this program you’ll notice that the order maintained by the HashSet is different from TreeSet, since each has a different way of storing elements so they can be located later. (TreeSet keeps them sorted, while HashSet uses a hashing function, which is designed specifically for rapid lookups.) When creating your own types, be aware that a Set needs a way to maintain a storage order, which means you must implement the Comparable interface and define the compareTo( ) method. Here’s an example:

//: c09:Set2.java
// Putting your own type in a Set.
import java.util.*;

class MyType implements Comparable {
  private int i;
  public MyType(int n) { i = n; }
  public boolean equals(Object o) {
    return 
      (o instanceof MyType) 
      && (i == ((MyType)o).i);
  }
  public int hashCode() { return i; }
  public String toString() { return i + " "; }
  public int compareTo(Object o) {
    int i2 = ((MyType)o).i;
    return (i2 < i ? -1 : (i2 == i ? 0 : 1));
  }
}

public class Set2 {
  public static Set fill(Set a, int size) {
    for(int i = 0; i < size; i++)
      a.add(new MyType(i));
    return a;
  }
  public static void test(Set a) {
    fill(a, 10);
    fill(a, 10); // Try to add duplicates
    fill(a, 10);
    a.addAll(fill(new TreeSet(), 10));
    System.out.println(a);
  }
  public static void main(String[] args) {
    test(new HashSet());
    test(new TreeSet());
  }
} ///:~

The form for the definitions for equals( ) and hashCode( ) will be described later in this chapter. You must define an equals( ) in both cases, but the hashCode( ) is absolutely necessary only if the class will be placed in a HashSet (which is likely, since that should generally be your first choice as a Set implementation). However, as a programming style you should always override hashCode( ) when you override equals( ). This process will be fully detailed later in this chapter. [ Add Comment ]

In the compareTo( ), note that I did not use the “simple and obvious” form return i-i2. Although this is a common programming error, it would only work properly if i and i2 were “unsigned” ints (if Java had an “unsigned” keyword, which it does not). It breaks for Java’s signed int, which is not big enough to represent the difference of two signed ints. If i is a large positive integer and j is a large negative integer, i-j will overflow and return a negative value, which will not work. [ Add Comment ]

SortedSet

If you have a SortedSet (of which TreeSet is the only one available), the elements are guaranteed to be in sorted order which allows additional functionality to be provided with these methods in the SortedSet interface: [ Add Comment ]

Comparator comparator(): Produces the Comparator used for this Set, or null for natural ordering.

Object first(): Produces the lowest element.

Object last(): Produces the highest element.

SortedSet subSet(fromElement, toElement): Produces a view of this Set with elements from fromElement, inclusive, to toElement, exclusive.

SortedSet headSet(toElement): Produces a view of this Set with elements less than toElement.

SortedSet tailSet(fromElement): Produces a view of this Set with elements greater than or equal to fromElement.

Map functionality

An ArrayList allows you to select from a sequence of objects using a number, so in a sense it associates numbers to objects. But what if you’d like to select from a sequence of objects using some other criterion? A stack is an example: its selection criterion is “the last thing pushed on the stack.” A powerful twist on this idea of “selecting from a sequence” is alternately termed a map, a dictionary, or an associative array. Conceptually, it seems like an ArrayList, but instead of looking up objects using a number, you look them up using another object! This is often a key process in a program. [ Add Comment ]

The concept shows up in Java as the Map interface. The put(Object key, Object value) method adds a value (the thing you want), and associates it with a key (the thing you look it up with). get(Object key) produces the value given the corresponding key. You can also test a Map to see if it contains a key or a value with containsKey( ) and containsValue( ). [ Add Comment ]

The standard Java library contains two different types of Maps: HashMap and TreeMap. Both have the same interface (since they both implement Map), but they differ in one distinct way: efficiency. If you look at what must be done for a get( ), it seems pretty slow to search through (for example) an ArrayList for the key. This is where HashMap speeds things up. Instead of a slow search for the key, it uses a special value called a hash code. The hash code is a way to take some information in the object in question and turn it into a “relatively unique” int for that object. All Java objects can produce a hash code, and hashCode( ) is a method in the root class Object. A HashMap takes the hashCode( ) of the object and uses it to quickly hunt for the key. This results in a dramatic performance improvement[50].

Map (interface)

Maintains key-value associations (pairs), so you can look up a value using a key.

HashMap*

Implementation based on a hash table. (Use this instead of Hashtable.) Provides constant-time performance for inserting and locating pairs. Performance can be adjusted via constructors that allow you to set the capacity and load factor of the hash table.

TreeMap

Implementation based on a red-black tree. When you view the keys or the pairs, they will be in sorted order (determined by Comparable or Comparator, discussed later). The point of a TreeMap is that you get the results in sorted order. TreeMap is the only Map with the subMap( ) method, which allows you to return a portion of the tree.

Sometimes you’ll also need to know the details of how hashing works, so we’ll look at that a little later.

The following example uses the Collections2.fill( ) method and the test data sets that were previously defined: [ Add Comment ]

//: c09:Map1.java
// Things you can do with Maps.
import java.util.*;
import com.bruceeckel.util.*;

public class Map1 {
  static Collections2.StringPairGenerator geo = 
    Collections2.geography;
  static Collections2.RandStringPairGenerator 
    rsp = Collections2.rsp;
  // Producing a Set of the keys:
  public static void printKeys(Map m) {
    System.out.print("Size = " + m.size() +", ");
    System.out.print("Keys: ");
    System.out.println(m.keySet());
  }
  // Producing a Collection of the values:
  public static void printValues(Map m) {
    System.out.print("Values: ");
    System.out.println(m.values());
  }
  public static void test(Map m) {
    Collections2.fill(m, geo, 25);
    // Map has 'Set' behavior for keys:
    Collections2.fill(m, geo.reset(), 25);
    printKeys(m);
    printValues(m);
    System.out.println(m);
    String key = CountryCapitals.pairs[4][0];
    String value = CountryCapitals.pairs[4][1];
    System.out.println("m.containsKey(\"" + key +
      "\"): " + m.containsKey(key));
    System.out.println("m.get(\"" + key + "\"): "
      + m.get(key));
    System.out.println("m.containsValue(\"" 
      + value + "\"): " + 
      m.containsValue(value)); 
    Map m2 = new TreeMap();
    Collections2.fill(m2, rsp, 25);
    m.putAll(m2);
    printKeys(m);
    key = m.keySet().iterator().next().toString();
    System.out.println("First key in map: "+key);
    m.remove(key);
    printKeys(m);
    m.clear();
    System.out.println("m.isEmpty(): " 
      + m.isEmpty());
    Collections2.fill(m, geo.reset(), 25);
    // Operations on the Set change the Map:
    m.keySet().removeAll(m.keySet());
    System.out.println("m.isEmpty(): " 
      + m.isEmpty());
  }
  public static void main(String[] args) {
    System.out.println("Testing HashMap");
    test(new HashMap());
    System.out.println("Testing TreeMap");
    test(new TreeMap());
  }
} ///:~

The printKeys( ) and printValues( ) methods are not only useful utilities, they also demonstrate how to produce Collection views of a Map. The keySet( ) method produces a Set backed by the keys in the Map. Similar treatment is given to values( ), which produces a Collection containing all the values in the Map. (Note that keys must be unique, while values may contain duplicates.) Since these Collections are backed by the Map, any changes in a Collection will be reflected in the associated Map. [ Add Comment ]

The rest of the program provides simple examples of each Map operation, and tests each type of Map. [ Add Comment ]

As an example of the use of a HashMap, consider a program to check the randomness of Java’s Math.random( ) method. Ideally, it would produce a perfect distribution of random numbers, but to test this you need to generate a bunch of random numbers and count the ones that fall in the various ranges. A HashMap is perfect for this, since it associates objects with objects (in this case, the value object contains the number produced by Math.random( ) along with the number of times that number appears):

//: c09:Statistics.java
// Simple demonstration of HashMap.
import java.util.*;

class Counter { 
  int i = 1; 
  public String toString() { 
    return Integer.toString(i); 
  }
}

public class Statistics {
  public static void main(String[] args) {
    HashMap hm = new HashMap();
    for(int i = 0; i < 10000; i++) {
      // Produce a number between 0 and 20:
      Integer r = 
        new Integer((int)(Math.random() * 20));
      if(hm.containsKey(r))
        ((Counter)hm.get(r)).i++;
      else
        hm.put(r, new Counter());
    }
    System.out.println(hm);
  }
} ///:~

In main( ), each time a random number is generated it is wrapped inside an Integer object so that reference can be used with the HashMap. (You can’t use a primitive with a container, only an object reference.) The containsKey( ) method checks to see if this key is already in the container. (That is, has the number been found already?) If so, the get( ) method produces the associated value for the key, which in this case is a Counter object. The value i inside the counter is incremented to indicate that one more of this particular random number has been found. [ Add Comment ]

If the key has not been found yet, the method put( ) will place a new key-value pair into the HashMap. Since Counter automatically initializes its variable i to one when it’s created, it indicates the first occurrence of this particular random number. [ Add Comment ]

To display the HashMap, it is simply printed. The HashMap toString( ) method moves through all the key-value pairs and calls the toString( ) for each one. The Integer.toString( ) is predefined, and you can see the toString( ) for Counter. The output from one run (with some line breaks added) is:

{19=526, 18=533, 17=460, 16=513, 15=521, 14=495,
 13=512, 12=483, 11=488, 10=487, 9=514, 8=523,
 7=497, 6=487, 5=480, 4=489, 3=509, 2=503, 1=475,
 0=505}

You might wonder at the necessity of the class Counter, which seems like it doesn’t even have the functionality of the wrapper class Integer. Why not use int or Integer? Well, you can’t use an int because all of the containers can hold only Object references. After seeing containers the wrapper classes might begin to make a little more sense to you, since you can’t put any of the primitive types in containers. However, the only thing you can do with the Java wrappers is to initialize them to a particular value and read that value. That is, there’s no way to change a value once a wrapper object has been created. This makes the Integer wrapper immediately useless to solve our problem, so we’re forced to create a new class that does satisfy the need. [ Add Comment ]

SortedMap

If you have a SortedMap (of which TreeMap is the only one available), the keys are guaranteed to be in sorted order which allows additional functionality to be provided with these methods in the SortedMap interface: [ Add Comment ]

Comparator comparator(): Produces the comparator used for this Map, or null for natural ordering.

Object firstKey(): Produces the lowest key.

Object lastKey(): Produces the highest key.

SortedMap subMap(fromKey, toKey): Produces a view of this Map with keys from fromKey, inclusive, to toKey, exclusive.

SortedMap headMap(toKey): Produces a view of this Map with keys less than toKey.

SortedMap tailMap(fromKey): Produces a view of this Map with keys greater than or equal to fromKey.

Hashing and hash codes

In the previous example, a standard library class (Integer) was used as a key for the HashMap. It worked fine as a key, because it has all the necessary wiring to make it work correctly as a key. But a common pitfall occurs with HashMaps when you create your own classes to be used as keys. For example, consider a weather predicting system that matches Groundhog objects to Prediction objects. It seems fairly straightforward—you create the two classes, and use Groundhog as the key and Prediction as the value: [ Add Comment ]

//: c09:SpringDetector.java
// Looks plausible, but doesn't work.
import java.util.*;

class Groundhog {
  int ghNumber;
  Groundhog(int n) { ghNumber = n; }
}

class Prediction {
  boolean shadow = Math.random() > 0.5;
  public String toString() {
    if(shadow)
      return "Six more weeks of Winter!";
    else
      return "Early Spring!";
  }
}

public class SpringDetector {
  public static void main(String[] args) {
    HashMap hm = new HashMap();
    for(int i = 0; i < 10; i++)
      hm.put(new Groundhog(i), new Prediction());
    System.out.println("hm = " + hm + "\n");
    System.out.println(
      "Looking up prediction for Groundhog #3:");
    Groundhog gh = new Groundhog(3);
    if(hm.containsKey(gh))
      System.out.println((Prediction)hm.get(gh));
    else
      System.out.println("Key not found: " + gh);
  }
} ///:~

Each Groundhog is given an identity number, so you can look up a Prediction in the HashMap by saying, “Give me the Prediction associated with Groundhog number 3.” The Prediction class contains a boolean that is initialized using Math.random( ), and a toString( ) that interprets the result for you. In main( ), a HashMap is filled with Groundhogs and their associated Predictions. The HashMap is printed so you can see that it has been filled. Then a Groundhog with an identity number of 3 is used as a key to look up the prediction for Groundhog #3 (which you can see must be in the Map). [ Add Comment ]

It seems simple enough, but it doesn’t work. The problem is that Groundhog is inherited from the common root class Object (which is what happens if you don’t specify a base class, thus all classes are ultimately inherited from Object). It is Object’s hashCode( ) method that is used to generate the hash code for each object, and by default it just uses the address of its object. Thus, the first instance of Groundhog(3) does not produce a hash code equal to the hash code for the second instance of Groundhog(3) that we tried to use as a lookup. [ Add Comment ]

You might think that all you need to do is write an appropriate override for hashCode( ). But it still won’t work until you’ve done one more thing: override the equals( ) that is also part of Object. This method is used by the HashMap when trying to determine if your key is equal to any of the keys in the table. Again, the default Object.equals( ) simply compares object addresses, so one Groundhog(3) is not equal to another Groundhog(3). [ Add Comment ]

Thus, to use your own classes as keys in a HashMap, you must override both hashCode( ) and equals( ), as shown in the following solution to the problem above:

//: c09:SpringDetector2.java
// A class that's used as a key in a HashMap 
// must override hashCode() and equals().
import java.util.*;

class Groundhog2 {
  int ghNumber;
  Groundhog2(int n) { ghNumber = n; }
  public int hashCode() { return ghNumber; }
  public boolean equals(Object o) {
    return (o instanceof Groundhog2)
      && (ghNumber == ((Groundhog2)o).ghNumber);
  }
}

public class SpringDetector2 {
  public static void main(String[] args) {
    HashMap hm = new HashMap();
    for(int i = 0; i < 10; i++)
      hm.put(new Groundhog2(i),new Prediction());
    System.out.println("hm = " + hm + "\n");
    System.out.println(
      "Looking up prediction for groundhog #3:");
    Groundhog2 gh = new Groundhog2(3);
    if(hm.containsKey(gh))
      System.out.println((Prediction)hm.get(gh));
  }
} ///:~

Note that this uses the Prediction class from the previous example, so SpringDetector.java must be compiled first or you’ll get a compile-time error when you try to compile SpringDetector2.java. [ Add Comment ]

Groundhog2.hashCode( ) returns the groundhog number as an identifier. In this example, the programmer is responsible for ensuring that no two groundhogs exist with the same ID number. The hashCode( ) is not required to return a unique identifier (something you’ll understand better later in this chapter), but the equals( ) method must be able to strictly determine whether two objects are equivalent. [ Add Comment ]

Even though it appears that the equals( ) method is only checking to see whether the argument is an instance of Groundhog2 (using the instanceof keyword, which is fully explained in Chapter 12), the instanceof actually quietly does a second sanity check, to see if the object is null, since instanceof produces false if the left-hand argument is null. Assuming it’s the correct type and not null, the comparison is based on the actual ghNumbers. This time, when you run the program, you’ll see it produces the correct output. [ Add Comment ]

When creating your own class to use in a HashSet, you must pay attention to the same issues as when it is used as a key in a HashMap. [ Add Comment ]

Understanding hashCode( )

The above example is only a start toward solving the problem correctly. It shows that if you do not override hashCode( ) and equals( ) for your key, the hashed data structure (HashSet or HashMap) will not be able to deal with your key properly. However, to get a good solution for the problem you need to understand what’s going on inside the hashed data structure. [ Add Comment ]

First, consider the motivation behind hashing: you want to look up an object using another object. But you can accomplish this with a TreeSet or TreeMap, too. It’s also possible to implement your own Map. To do so, the Map.entrySet( ) method must be supplied to produce a set of Map.Entry objects. MPair will be defined as the new type of Map.Entry. In order for it to be placed in a TreeSet it must implement equals( ) and be Comparable:

//: c09:MPair.java
// A Map implemented with ArrayLists.
import java.util.*;

public class MPair 
implements Map.Entry, Comparable {
  Object key, value;
  MPair(Object k, Object v) {
    key = k;
    value = v;
  }
  public Object getKey() { return key; }
  public Object getValue() { return value; }
  public Object setValue(Object v){
    Object result = value;
    value = v;
    return result;
  }
  public boolean equals(Object o) {
    return key.equals(((MPair)o).key);
  }
  public int compareTo(Object rv) {
    return ((Comparable)key).compareTo(
      ((MPair)rv).key);
  }
} ///:~
Notice that the comparisons are only interested in the keys, so duplicate values are perfectly acceptable.

The following example implements a Map using a pair of ArrayLists: [ Add Comment ]

//: c09:SlowMap.java
// A Map implemented with ArrayLists.
import java.util.*;
import com.bruceeckel.util.*;

public class SlowMap extends AbstractMap {
  private ArrayList 
    keys = new ArrayList(),
    values = new ArrayList();
  public Object put(Object key, Object value) {
    Object result = get(key);
    if(!keys.contains(key)) {
      keys.add(key);
      values.add(value);
    } else
      values.set(keys.indexOf(key), value);
    return result;
  }
  public Object get(Object key) {
    if(!keys.contains(key))
      return null;
    return values.get(keys.indexOf(key));
  }
  public Set entrySet() {
    Set entries = new HashSet();
    Iterator
      ki = keys.iterator(),
      vi = values.iterator();
    while(ki.hasNext())
      entries.add(new MPair(ki.next(), vi.next()));
    return entries;
  }
  public static void main(String[] args) {
    SlowMap m = new SlowMap();
    Collections2.fill(m, 
      Collections2.geography, 25);
    System.out.println(m);    
  }
} ///:~

The put( ) method simply places the keys and values in corresponding ArrayLists. In main( ), a SlowMap is loaded and then printed to show that it works.

This shows that it’s not that hard to produce a new type of Map. But as the name suggests, a SlowMap isn’t very fast, so you probably wouldn’t use it if you had an alternative available. The problem is in the lookup of the key: there is no order so a simple linear search is used, which is the slowest way to look something up. [ Add Comment ]

The whole point of hashing is speed: hashing allows the lookup to happen quickly. Since the bottleneck is in the speed of the key lookup, one of the solutions to the problem could be by keeping the keys sorted and then using Collections.binarySearch( ) to perform the lookup (an exercise at the end of this chapter will walk you through this process). [ Add Comment ]

Hashing goes further by saying that all you want to do is to store the key somewhere so that it can be quickly found. As you’ve seen in this chapter, the fastest structure in which to store a group of elements is an array, so that will be used for representing the key information (note carefully that I said “key information,” and not the key itself). Also seen in this chapter was the fact that an array, once allocated, cannot be resized, so we have a problem: we want to be able to store any number of values in the Map, but if the number of keys is fixed by the array size, how can this be? [ Add Comment ]

The answer is that the array will not hold the keys. From the key object, a number will be derived that will index into the array. This number is the hash code, produced by the hashCode( ) method (in computer science parlance, this is the hash function) defined in Object and presumably overridden by your class. To solve the problem of the fixed-size array, more than one key may produce the same index. That is, there may be collisions. Because of this, it doesn’t matter how big the array is because each key object will land somewhere in that array. [ Add Comment ]

So the process of looking up a value starts by computing the hash code and using it to index into the array. If you could guarantee that there were no collisions (which could be possible if you have a fixed number of values) then you’d have a perfect hashing function, but that’s a special case. In all other cases, collisions are handled by external chaining: the array points not directly to a value, but instead to a list of values. These values are searched in a linear fashion using the equals( ) method. Of course, this aspect of the search is much slower, but if the hash function is good there will only be a few values in each slot, at the most. So instead of searching through the entire list, you quickly jump to a slot where you have to compare a few entries to find the value. This is much faster, which is why the HashMap is so quick. [ Add Comment ]

Knowing the basics of hashing, it’s possible to implement a simple hashed Map:

//: c09:SimpleHashMap.java
// A demonstration hashed Map.
import java.util.*;
import com.bruceeckel.util.*;

public class SimpleHashMap extends AbstractMap {
  // Choose a prime number for the hash table
  // size, to achieve a uniform distribution:
  private final static int SZ = 997;
  private LinkedList[] bucket= new LinkedList[SZ];
  public Object put(Object key, Object value) {
    Object result = null;
    int index = key.hashCode() % SZ;
    if(index < 0) index = -index;
    if(bucket[index] == null)
      bucket[index] = new LinkedList();
    LinkedList pairs = bucket[index];
    MPair pair = new MPair(key, value);
    ListIterator it = pairs.listIterator();
    boolean found = false;
    while(it.hasNext()) {
      Object iPair = it.next();
      if(iPair.equals(pair)) {
        result = ((MPair)iPair).getValue();
        it.set(pair); // Replace old with new
        found = true;
        break;
      }
    }
    if(!found)
      bucket[index].add(pair);
    return result;
  }
  public Object get(Object key) {
    int index = key.hashCode() % SZ;
    if(index < 0) index = -index;
    if(bucket[index] == null) return null;
    LinkedList pairs = bucket[index];
    MPair match = new MPair(key, null);
    ListIterator it = pairs.listIterator();
    while(it.hasNext()) {
      Object iPair = it.next();
      if(iPair.equals(match))
        return ((MPair)iPair).getValue();
    }
    return null;
  }
  public Set entrySet() {
    Set entries = new HashSet();
    for(int i = 0; i < bucket.length; i++) {
      if(bucket[i] == null) continue;
      Iterator it = bucket[i].iterator();
      while(it.hasNext())
        entries.add(it.next());
    }
    return entries;
  }
  public static void main(String[] args) {
    SimpleHashMap m = new SimpleHashMap();
    Collections2.fill(m, 
      Collections2.geography, 25);
    System.out.println(m);    
  }
} ///:~

Because the “slots” in a hash table are often referred to as buckets, the array that represents the actual table is called bucket. To promote even distribution, the number of buckets is typically a prime number. Notice that it is an array of LinkedList, which automatically provides for collisions—each new item is simply added to the end of the list. [ Add Comment ]

The return value of put( ) is null or, if the key was already in the list, the old value associated with that key. The return value is result, which is initialized to null, but if a key is discovered in the list then result is assigned to that key. [ Add Comment ]

For both put( ) and get( ), the first thing that happens is that the hashCode( ) is called for the key, and the result is forced to a positive number. Then it is forced to fit into the bucket array using the modulus operator and the size of the array. If that location is null, it means there are no elements that hash to that location, so a new LinkedList is created to hold the object that just did. However, the normal process is to look through the list to see if there are duplicates, and if there are, the old value is put into result and the new value replaces the old. The found flag keeps track of whether an old key-value pair was found and, if not, the new pair is appended to the end of the list. [ Add Comment ]

In get( ), you’ll see very similar code as that contained in put( ), but simpler. The index is calculated into the bucket array, and if a LinkedList exists it is searched for a match. [ Add Comment ]

entrySet( ) must find and traverse all the lists, adding them to the result Set. Once this method has been created, the Map can be tested by filling it with values and then printing them. [ Add Comment ]

HashMap performance factors

To understand the issues, some terminology is necessary:

Capacity: The number of buckets in the table.

Initial capacity: The number of buckets when the table is created. HashMap and HashSet: have constructors that allow you to specify the initial capacity.

Size: The number of entries currently in the table.

Load factor: size/capacity. A load factor of 0 is an empty table, 0.5 is a half-full table, etc. A lightly-loaded table will have few collisions and so is optimal for insertions and lookups (but will slow down the process of traversing with an iterator). HashMap and HashSet have constructors that allow you to specify the load factor, which means that when this load factor is reached the container will automatically increase the capacity (the number of buckets) by roughly doubling it, and will redistribute the existing objects into the new set of buckets (this is called rehashing).

The default load factor used by HashMap is 0.75 (it doesn’t rehash until the table is ¾ full). This seems to be a good trade-off between time and space costs. A higher load factor decreases the space required by the table but increases the lookup cost, which is important because lookup is what you do most of the time (including both get( ) and put( )). [ Add Comment ]

If you know that you’ll be storing many entries in a HashMap, creating it with an appropriately large initial capacity will prevent the overhead of automatic rehashing. [ Add Comment ]

Overriding hashCode( )

Now that you understand what’s involved in the function of the HashMap, the issues involved in writing a hashCode( ) will make more sense. [ Add Comment ]

First of all, you don’t have control of the creation of the actual value that’s used to index into the array of buckets. That is dependent on the capacity of the particular HashMap object, and that capacity changes depending on how full the container is, and what the load factor is. The value produced by your hashCode( ) will be further processed in order to create the bucket index (in SimpleHashMap the calculation is just a modulo by the size of the bucket array). [ Add Comment ]

The most important factor in creating a hashCode( ) is that, regardless of when hashCode( ) is called, it produces the same value for a particular object every time it is called. If you end up with an object that produces one hashCode( ) value when it is put( ) into a HashMap, and another during a get( ), you won’t be able to retrieve the objects. So if your hashCode( ) depends on mutable data in the object the user must be made aware that changing the data will effectively produce a different key by generating a different hashCode( ). [ Add Comment ]

In addition, you will probably not want to generate a hashCode( ) that is based on unique object information—in particular, the value of this makes a bad hashCode( ) because then you can’t generate a new identical key to the one used to put( ) the original key-value pair. This was the problem that occurred in SpringDetector.java because the default implementation of hashCode( ) does use the object address. So you’ll want to use information in the object that identifies the object in a meaningful way. [ Add Comment ]

One example is found in the String class. Strings have the special characteristic that if a program has several String objects that contain identical character sequences, then those String objects all map to the same memory (the mechanism for this is described in Appendix A). So it makes sense that the hashCode( ) produced by two separate instances of new String(“hello”) should be identical. You can see it by running this program:

//: c09:StringHashCode.java
public class StringHashCode {
  public static void main(String[] args) {
    System.out.println("Hello".hashCode());
    System.out.println("Hello".hashCode());
  }
} ///:~

For this to work, the hashCode( ) for String must be based on the contents of the String. [ Add Comment ]

So for a hashCode( ) to be effective, it must be fast and it must be meaningful: that is, it must generate a value based on the contents of the object. Remember that this value doesn’t have to be unique—you should lean toward speed rather than uniqueness—but between hashCode( ) and equals( ) the identity of the object must be completely resolved. [ Add Comment ]

Because the hashCode( ) is further processed before the bucket index is produced, the range of values is not important; it just needs to generate an int. [ Add Comment ]

There’s one other factor: a good hashCode( ) should result in an even distribution of values. If the values tend to cluster, then the HashMap or HashSet will be more heavily loaded in some areas and will not be as fast as it could be with an evenly distributed hashing function. [ Add Comment ]

Here’s an example that follows these guidelines:

//: c09:CountedString.java
// Creating a good hashCode().
import java.util.*;

public class CountedString {
  private String s;
  private int id = 0;
  private static ArrayList created = 
    new ArrayList();
  public CountedString(String str) {
    s = str;
    created.add(s);
    Iterator it = created.iterator();
    // Id is the total number of instances
    // of this string in use by CountedString:
    while(it.hasNext())
      if(it.next().equals(s))
        id++;
  }
  public String toString() {
    return "String: " + s + " id: " + id +
      " hashCode(): " + hashCode() + "\n";
  }
  public int hashCode() { 
    return s.hashCode() * id;
  }
  public boolean equals(Object o) {
    return (o instanceof CountedString)
      && s.equals(((CountedString)o).s)
      && id == ((CountedString)o).id;
  }
  public static void main(String[] args) {
    HashMap m = new HashMap();
    CountedString[] cs = new CountedString[10];
    for(int i = 0; i < cs.length; i++) {
      cs[i] = new CountedString("hi");
      m.put(cs[i], new Integer(i));
    }
    System.out.println(m);
    for(int i = 0; i < cs.length; i++) {
      System.out.print("Looking up " + cs[i]);
      System.out.println(m.get(cs[i]));
    }
  }
} ///:~

CountedString includes a String and an id that represents the number of CountedString objects that contain an identical String. The counting is accomplished in the constructor by iterating through the static ArrayList where all the Strings are stored. [ Add Comment ]

Both hashCode( ) and equals( ) produce results based on both fields; if they were just based on the String alone or the id alone there would be duplicate matches for distinct values. [ Add Comment ]

Note how simple the hashCode( ) is: String’s hashCode( ) is multiplied by the id. Smaller is generally better (and faster) for hashCode( ). [ Add Comment ]

In main( ), a bunch of CountedString objects are created, using the same String to show that the duplicates create unique values because of the count id. The HashMap is displayed so that you can see how it is stored internally (no discernible orders) and then each key is looked up individually to demonstrate that the lookup mechanism is working properly. [ Add Comment ]

Holding references

The java.lang.ref library contains a set of classes that allow greater flexibility in garbage collection, which are especially useful when you have large objects that may cause memory exhaustion. There are three classes inherited from the abstract class Reference: SoftReference, WeakReference, and PhantomReference. Each of these provides a different level of indirection for the garbage collector, if the object in question is only reachable through one of these Reference objects. [ Add Comment ]

If an object is reachable it means that somewhere in your program the object can be found. This could mean that you have an ordinary reference on the stack that goes right to the object, but you might also have a reference to an object that has a reference to the object in question; there could be many intermediate links. If an object is reachable, the garbage collector cannot release it because it’s still in use by your program. If an object isn’t reachable, there’s no way for your program to use it so it’s safe to garbage-collect that object. [ Add Comment ]

You use Reference objects when you want to continue to hold onto a reference to that object—you want to be able to reach that object—but you also want to allow the garbage collector to release that object. Thus, you have a way to go on using the object, but if memory exhaustion is imminent you allow that object to be released. [ Add Comment ]

You accomplish this by using a Reference object as an intermediary between you and the ordinary reference, and there must be no ordinary references to the object (ones that are not wrapped inside Reference objects). If the garbage collector discovers that an object is reachable through an ordinary reference, it will not release that object. [ Add Comment ]

In the order SoftReference, WeakReference, and PhantomReference, each one is “weaker” than the last, and corresponds to a different level of reachability. Soft references are for implementing memory-sensitive caches. Weak references are for implementing “canonicalizing mappings”—where instances of objects can be simultaneously used in multiple places in a program, to save storage—that do not prevent their keys (or values) from being reclaimed. Phantom references are for scheduling pre-mortem cleanup actions in a more flexible way than is possible with the Java finalization mechanism. [ Add Comment ]

With SoftReferences and WeakReferences, you have a choice about whether to place them on a ReferenceQueue (the device used for premortem cleanup actions), but a PhantomReference can only be built on a ReferenceQueue. Here’s a simple demonstration:

//: c09:References.java
// Demonstrates Reference objects
import java.lang.ref.*;

class VeryBig {
  static final int SZ = 10000;
  double[] d = new double[SZ];
  String ident;
  public VeryBig(String id) { ident = id; }
  public String toString() { return ident; }
  public void finalize() {
    System.out.println("Finalizing " + ident);
  }
}

public class References {
  static ReferenceQueue rq= new ReferenceQueue();
  public static void checkQueue() {
    Object inq = rq.poll();
    if(inq != null)
      System.out.println("In queue: " + 
        (VeryBig)((Reference)inq).get());
  }
  public static void main(String[] args) {
    int size = 10;
    // Or, choose size via the command line:
    if(args.length > 0)
      size = Integer.parseInt(args[0]);    
    SoftReference[] sa =
      new SoftReference[size];
    for(int i = 0; i < sa.length; i++) {
      sa[i] = new SoftReference(
        new VeryBig("Soft " + i), rq);
      System.out.println("Just created: " +
        (VeryBig)sa[i].get());
      checkQueue();
    }
    WeakReference[] wa =
      new WeakReference[size];
    for(int i = 0; i < wa.length; i++) {
      wa[i] = new WeakReference(
        new VeryBig("Weak " + i), rq);
      System.out.println("Just created: " +
        (VeryBig)wa[i].get());
      checkQueue();
    }
    SoftReference s = new SoftReference(
      new VeryBig("Soft"));
    WeakReference w = new WeakReference(
      new VeryBig("Weak"));
    System.gc();
    PhantomReference[] pa =
      new PhantomReference[size];
    for(int i = 0; i < pa.length; i++) {
      pa[i] = new PhantomReference(
        new VeryBig("Phantom " + i), rq);
      System.out.println("Just created: " +
        (VeryBig)pa[i].get());
      checkQueue();
    }
  }
} ///:~

When you run this program (you’ll want to pipe the output through a “more” utility so that you can view the output in pages), you’ll see that the objects are garbage-collected, even though you still have access to them through the Reference object (to get the actual object reference, you use get( )). You’ll also see that the ReferenceQueue always produces a Reference containing a null object. To make use of this, you can inherit from the particular Reference class you’re interested in and add more useful methods to the new type of Reference. [ Add Comment ]

The WeakHashMap

The containers library has a special Map to hold weak references: the WeakHashMap. This class is designed to make the creation of canonicalized mappings easier. In such a mapping, you are saving storage by making only one instance of a particular value. When the program needs that value, it looks up the existing object in the mapping and uses that (rather than creating one from scratch). The mapping may make the values as part of its initialization, but it’s more likely that the values are made on demand. [ Add Comment ]

Since this is a storage-saving technique, it’s very convenient that the WeakHashMap allows the garbage collector to automatically clean up the keys and values. You don’t have to do anything special to the keys and values you want to place in the WeakHashMap; these are automatically wrapped in WeakReferences by the map. The trigger to allow cleanup is if the key is no longer in use, as demonstrated here:

//: c09:CanonicalMapping.java
// Demonstrates WeakHashMap.
import java.util.*;
import java.lang.ref.*;

class Key {
  String ident;
  public Key(String id) { ident = id; }
  public String toString() { return ident; }
  public int hashCode() { 
    return ident.hashCode();
  }
  public boolean equals(Object r) {
    return (r instanceof Key)
      && ident.equals(((Key)r).ident);
  }
  public void finalize() {
    System.out.println("Finalizing Key "+ ident);
  }
}

class Value {
  String ident;
  public Value(String id) { ident = id; }
  public String toString() { return ident; }
  public void finalize() {
    System.out.println("Finalizing Value "+ident);
  }
}

public class CanonicalMapping {
  public static void main(String[] args) {
    int size = 1000;
    // Or, choose size via the command line:
    if(args.length > 0)
      size = Integer.parseInt(args[0]);    
    Key[] keys = new Key[size];
    WeakHashMap whm = new WeakHashMap();
    for(int i = 0; i < size; i++) {
      Key k = new Key(Integer.toString(i));
      Value v = new Value(Integer.toString(i));
      if(i % 3 == 0)
        keys[i] = k; // Save as "real" references
      whm.put(k, v);
    }
    System.gc();
  }
} ///:~

The Key class must have a hashCode( ) and an equals( ) since it is being used as a key in a hashed data structure, as described previously in this chapter. [ Add Comment ]

When you run the program you’ll see that the garbage collector will skip every third key, because an ordinary reference to that key has also been placed in the keys array and thus those objects cannot be garbage-collected. [ Add Comment ]

Iterators revisited

We can now demonstrate the true power of the Iterator: the ability to separate the operation of traversing a sequence from the underlying structure of that sequence. In the following example, the class PrintData uses an Iterator to move through a sequence and call the toString( ) method for every object. Two different types of containers are created—an ArrayList and a HashMap—and they are each filled with, respectively, Mouse and Hamster objects. (These classes are defined earlier in this chapter.) Because an Iterator hides the structure of the underlying container, PrintData doesn’t know or care what kind of container the Iterator comes from:

//: c09:Iterators2.java
// Revisiting Iterators.
import java.util.*;

class PrintData {
  static void print(Iterator e) {
    while(e.hasNext())
      System.out.println(e.next());
  }
}

public class Iterators2 {
  public static void main(String[] args) {
    ArrayList v = new ArrayList();
    for(int i = 0; i < 5; i++)
      v.add(new Mouse(i));
    HashMap m = new HashMap();
    for(int i = 0; i < 5; i++)
      m.put(new Integer(i), new Hamster(i));
    System.out.println("ArrayList");
    PrintData.print(v.iterator());
    System.out.println("HashMap");
    PrintData.print(m.entrySet().iterator());
  }
} ///:~

For the HashMap, the entrySet( ) method produces a Set of Map.entry objects, which contain both the key and the value for each entry, so you see both of them printed. [ Add Comment ]

Note that PrintData.print( ) takes advantage of the fact that the objects in these containers are of class Object so the call toString( ) by System.out.println( ) is automatic. It’s more likely that in your problem, you must make the assumption that your Iterator is walking through a container of some specific type. For example, you might assume that everything in the container is a Shape with a draw( ) method. Then you must downcast from the Object that Iterator.next( ) returns to produce a Shape. [ Add Comment ]

Choosing an implementation

By now you should understand that there are really only three container components: Map, List, and Set, and only two or three implementations of each interface. If you need to use the functionality offered by a particular interface, how do you decide which particular implementation to use? [ Add Comment ]

To understand the answer, you must be aware that each different implementation has its own features, strengths, and weaknesses. For example, you can see in the diagram that the “feature” of Hashtable, Vector, and Stack is that they are legacy classes, so that old code doesn’t break. On the other hand, it’s best if you don’t use those for new (Java 2) code. [ Add Comment ]

The distinction between the other containers often comes down to what they are “backed by”; that is, the data structures that physically implement your desired interface. This means that, for example, ArrayList and LinkedList implement the List interface so your program will produce the same results regardless of the one you use. However, ArrayList is backed by an array, while the LinkedList is implemented in the usual way for a doubly linked list, as individual objects each containing data along with references to the previous and next elements in the list. Because of this, if you want to do many insertions and removals in the middle of a list, a LinkedList is the appropriate choice. (LinkedList also has additional functionality that is established in AbstractSequentialList.) If not, an ArrayList is typically faster. [ Add Comment ]

As another example, a Set can be implemented as either a TreeSet or a HashSet. A TreeSet is backed by a TreeMap and is designed to produce a constantly sorted set. However, if you’re going to have larger quantities in your Set, the performance of TreeSet insertions will get slow. When you’re writing a program that needs a Set, you should choose HashSet by default, and change to TreeSet when it's more important to have a constantly sorted set. [ Add Comment ]

Choosing between Lists

The most convincing way to see the differences between the implementations of List is with a performance test. The following code establishes an inner base class to use as a test framework, then creates an array of anonymous inner classes, one for each different test. Each of these inner classes is called by the test( ) method. This approach allows you to easily add and remove new kinds of tests.

//: c09:ListPerformance.java
// Demonstrates performance differences in Lists.
import java.util.*;
import com.bruceeckel.util.*;

public class ListPerformance {
  private abstract static class Tester {
    String name;
    int size; // Test quantity
    Tester(String name, int size) { 
      this.name = name;
      this.size = size;
    }
    abstract void test(List a, int reps);
  }
  private static Tester[] tests = {
    new Tester("get", 300) { 
      void test(List a, int reps) {
        for(int i = 0; i < reps; i++) {
          for(int j = 0; j < a.size(); j++)
            a.get(j);
        }
      }
    },
    new Tester("iteration", 300) { 
      void test(List a, int reps) {
        for(int i = 0; i < reps; i++) {
          Iterator it = a.iterator();
          while(it.hasNext())
            it.next();
        }
      }
    },
    new Tester("insert", 5000) { 
      void test(List a, int reps) {
        int half = a.size()/2;
        String s = "test";
        ListIterator it = a.listIterator(half);
        for(int i = 0; i < size * 10; i++)
          it.add(s);
      }
    },
    new Tester("remove", 5000) { 
      void test(List a, int reps) {
        ListIterator it = a.listIterator(3);
        while(it.hasNext()) {
          it.next();
          it.remove();
        }
      }
    },
  };
  public static void test(List a, int reps) {
    // A trick to print out the class name:
    System.out.println("Testing " + 
      a.getClass().getName());
    for(int i = 0; i < tests.length; i++) {
      Collections2.fill(a, 
        Collections2.countries.reset(),
        tests[i].size);
      System.out.print(tests[i].name);
      long t1 = System.currentTimeMillis();
      tests[i].test(a, reps);
      long t2 = System.currentTimeMillis();
      System.out.println(": " + (t2 - t1));
    }
  }
  public static void testArray(int reps) {
    System.out.println("Testing array as List");
    // Can only do first two tests on an array:
    for(int i = 0; i < 2; i++) {
      String[] sa = new String[tests[i].size];
      Arrays2.fill(sa, 
        Collections2.countries.reset());
      List a = Arrays.asList(sa);
      System.out.print(tests[i].name);
      long t1 = System.currentTimeMillis();
      tests[i].test(a, reps);
      long t2 = System.currentTimeMillis();
      System.out.println(": " + (t2 - t1));
    }
  }
  public static void main(String[] args) {
    int reps = 50000;
    // Or, choose the number of repetitions
    // via the command line:
    if(args.length > 0)
      reps = Integer.parseInt(args[0]);
    System.out.println(reps + " repetitions");
    testArray(reps);
    test(new ArrayList(), reps);
    test(new LinkedList(), reps);
    test(new Vector(), reps);
  }
} ///:~

The inner class Tester is abstract, to provide a base class for the specific tests. It contains a String to be printed when the test starts, a size parameter to be used by the test for quantity of elements or repetitions of tests, a constructor to initialize the fields, and an abstract method test( ) that does the work. All the different types of tests are collected in one place, the array tests, which is initialized with different anonymous inner classes that inherit from Tester. To add or remove tests, simply add or remove an inner class definition from the array, and everything else happens automatically. [ Add Comment ]

To compare array access to container access (primarily against ArrayList), a special test is created for arrays by wrapping one as a List using Arrays.asList( ). Note that only the first two tests can be performed in this case, because you cannot insert or remove elements from an array. [ Add Comment ]

The List that’s handed to test( ) is first filled with elements, then each test in the tests array is timed. The results will vary from machine to machine; they are intended to give only an order of magnitude comparison between the performance of the different containers. Here is a summary of one run:

Type

Get

Iteration

Insert

Remove

array

1430

3850

na

na

ArrayList

3070

12200

500

46850

LinkedList

16320

9110

110

60

Vector

4890

16250

550

46850

As expected, arrays are faster than any container for random-access lookups and iteration. You can see that random accesses (get( )) are cheap for ArrayLists and expensive for LinkedLists. (Oddly, iteration is faster for a LinkedList than an ArrayList, which is a bit counterintuitive.) On the other hand, insertions and removals from the middle of a list are dramatically cheaper for a LinkedList than for an ArrayListespecially removals. Vector is generally not as fast as ArrayList, and it should be avoided; it’s only in the library for legacy code support (the only reason it works in this program is because it was adapted to be a List in Java 2). The best approach is probably to choose an ArrayList as your default, and to change to a LinkedList if you discover performance problems due to many insertions and removals from the middle of the list. And of course, if you are working with a fixed-sized group of elements, use an array.

Choosing between Sets

You can choose between a TreeSet and a HashSet, depending on the size of the Set (if you need to produce an ordered sequence from a Set, use TreeSet). The following test program gives an indication of this trade-off: [ Add Comment ]

//: c09:SetPerformance.java
import java.util.*;
import com.bruceeckel.util.*;

public class SetPerformance {
  private abstract static class Tester {
    String name;
    Tester(String name) { this.name = name; }
    abstract void test(Set s, int size, int reps);
  }
  private static Tester[] tests = {
    new Tester("add") { 
      void test(Set s, int size, int reps) {
        for(int i = 0; i < reps; i++) {
          s.clear();
          Collections2.fill(s, 
            Collections2.countries.reset(),size);
        }
      }
    },
    new Tester("contains") { 
      void test(Set s, int size, int reps) {
        for(int i = 0; i < reps; i++)
          for(int j = 0; j < size; j++)
            s.contains(Integer.toString(j));
      }
    },
    new Tester("iteration") { 
      void test(Set s, int size, int reps) {
        for(int i = 0; i < reps * 10; i++) {
          Iterator it = s.iterator();
          while(it.hasNext())
            it.next();
        }
      }
    },
  };
  public static void 
  test(Set s, int size, int reps) {
    System.out.println("Testing " + 
      s.getClass().getName() + " size " + size);
    Collections2.fill(s, 
      Collections2.countries.reset(), size);
    for(int i = 0; i < tests.length; i++) {
      System.out.print(tests[i].name);
      long t1 = System.currentTimeMillis();
      tests[i].test(s, size, reps);
      long t2 = System.currentTimeMillis();
      System.out.println(": " + 
        ((double)(t2 - t1)/(double)size));
    }
  }
  public static void main(String[] args) {
    int reps = 50000;
    // Or, choose the number of repetitions
    // via the command line:
    if(args.length > 0)
      reps = Integer.parseInt(args[0]);
    // Small:
    test(new TreeSet(), 10, reps);
    test(new HashSet(), 10, reps);
    // Medium:
    test(new TreeSet(), 100, reps);
    test(new HashSet(), 100, reps);
    // Large:
    test(new TreeSet(), 1000, reps);
    test(new HashSet(), 1000, reps);
  }
} ///:~

The following table shows the results of one run. (Of course, this will be different according to the computer and JVM you are using; you should run the test yourself as well):

Type

Test size

Add

Contains

Iteration


10

138.0

115.0

187.0

TreeSet

100

189.5

151.1

206.5


1000

150.6

177.4

40.04


10

55.0

82.0

192.0

HashSet

100

45.6

90.0

202.2


1000

36.14

106.5

39.39

The performance of HashSet is generally superior to TreeSet for all operations (but in particular addition and lookup, the two most important operations). The only reason TreeSet exists is because it maintains its elements in sorted order, so you only use it when you need a sorted Set.

Choosing between Maps

When choosing between implementations of Map, the size of the Map is what most strongly affects performance, and the following test program gives an indication of this trade-off: [ Add Comment ]

//: c09:MapPerformance.java
// Demonstrates performance differences in Maps.
import java.util.*;
import com.bruceeckel.util.*;

public class MapPerformance {
  private abstract static class Tester {
    String name;
    Tester(String name) { this.name = name; }
    abstract void test(Map m, int size, int reps);
  }
  private static Tester[] tests = {
    new Tester("put") { 
      void test(Map m, int size, int reps) {
        for(int i = 0; i < reps; i++) {
          m.clear();
          Collections2.fill(m, 
            Collections2.geography.reset(), size);
        }
      }
    },
    new Tester("get") { 
      void test(Map m, int size, int reps) {
        for(int i = 0; i < reps; i++)
          for(int j = 0; j < size; j++)
            m.get(Integer.toString(j));
      }
    },
    new Tester("iteration") { 
      void test(Map m, int size, int reps) {
        for(int i = 0; i < reps * 10; i++) {
          Iterator it = m.entrySet().iterator();
          while(it.hasNext())
            it.next();
        }
      }
    },
  };
  public static void 
  test(Map m, int size, int reps) {
    System.out.println("Testing " + 
      m.getClass().getName() + " size " + size);
    Collections2.fill(m, 
      Collections2.geography.reset(), size);
    for(int i = 0; i < tests.length; i++) {
      System.out.print(tests[i].name);
      long t1 = System.currentTimeMillis();
      tests[i].test(m, size, reps);
      long t2 = System.currentTimeMillis();
      System.out.println(": " + 
        ((double)(t2 - t1)/(double)size));
    }
  }
  public static void main(String[] args) {
    int reps = 50000;
    // Or, choose the number of repetitions
    // via the command line:
    if(args.length > 0)
      reps = Integer.parseInt(args[0]);
    // Small:
    test(new TreeMap(), 10, reps);
    test(new HashMap(), 10, reps);
    test(new Hashtable(), 10, reps);
    // Medium:
    test(new TreeMap(), 100, reps);
    test(new HashMap(), 100, reps);
    test(new Hashtable(), 100, reps);
    // Large:
    test(new TreeMap(), 1000, reps);
    test(new HashMap(), 1000, reps);
    test(new Hashtable(), 1000, reps);
  }
} ///:~

Because the size of the map is the issue, you’ll see that the timing tests divide the time by the size to normalize each measurement. Here is one set of results. (Yours will probably be different.)

Type

Test size

Put

Get

Iteration


10

143.0

110.0

186.0

TreeMap

100

201.1

188.4

280.1


1000

222.8

205.2

40.7


10

66.0

83.0

197.0

HashMap

100

80.7

135.7

278.5


1000

48.2

105.7

41.4


10

61.0

93.0

302.0

Hashtable

100

90.6

143.3

329.0


1000

54.1

110.95

47.3

As you might expect, Hashtable performance is roughly equivalent to HashMap. (You can also see that HashMap is generally a bit faster. HashMap is intended to replace Hashtable.) The TreeMap is generally slower than the HashMap, so why would you use it? So you could use it not as a Map, but as a way to create an ordered list. The behavior of a tree is such that it’s always in order and doesn’t have to be specially sorted. Once you fill a TreeMap, you can call keySet( ) to get a Set view of the keys, then toArray( ) to produce an array of those keys. You can then use the static method Arrays.binarySearch( ) (discussed later) to rapidly find objects in your sorted array. Of course, you would probably only do this if, for some reason, the behavior of a HashMap was unacceptable, since HashMap is designed to rapidly find things. Also, you can easily create a HashMap from a TreeMap with a single object creation In the end, when you’re using a Map your first choice should be HashMap, and only if you need a constantly sorted Map will you need TreeMap.

Sorting and searching Lists

Utilities to perform sorting and searching for Lists have the same names and signatures as those for sorting arrays of objects, but are static methods of Collections instead of Arrays. Here’s an example, modified from ArraySearching.java:

//: c09:ListSortSearch.java
// Sorting and searching Lists with 'Collections.'
import com.bruceeckel.util.*;
import java.util.*;

public class ListSortSearch {
  public static void main(String[] args) {
    List list = new ArrayList();
    Collections2.fill(list, 
      Collections2.capitals, 25);
    System.out.println(list + "\n");
    Collections.shuffle(list);
    System.out.println("After shuffling: "+list);
    Collections.sort(list);
    System.out.println(list + "\n");
    Object key = list.get(12);
    int index = 
      Collections.binarySearch(list, key);
    System.out.println("Location of " + key + 
      " is " + index + ", list.get(" + 
      index + ") = " + list.get(index));
    AlphabeticComparator comp =
      new AlphabeticComparator();
    Collections.sort(list, comp);
    System.out.println(list + "\n");
    key = list.get(12);
    index = 
      Collections.binarySearch(list, key, comp);
    System.out.println("Location of " + key + 
      " is " + index + ", list.get(" + 
      index + ") = " + list.get(index));
  }
} ///:~

The use of these methods is identical to the ones in Arrays, but you’re using a List instead of an array. Just like searching and sorting with arrays, if you sort using a Comparator you must binarySearch( ) using the same Comparator. [ Add Comment ]

This program also demonstrates the shuffle( ) method in Collections, which randomizes the order of a List. [ Add Comment ]

Utilities

There are a number of other useful utilities in the Collections class:

enumeration(Collection)

Produces an old-style Enumeration for the argument.

max(Collection)

min(Collection)

Produces the maximum or minimum element in the argument using the natural comparison method of the objects in the Collection.

max(Collection, Comparator)

min(Collection, Comparator)

Produces the maximum or minimum element in the Collection using the Comparator.

reverse( )

Reverses all the elements in place.

copy(List dest, List src)

Copies elements from src to dest.

fill(List list, Object o)

Replaces all the elements of list with o.

nCopies(int n, Object o)

Returns an immutable List of size n whose references all point to o.

Note that min( ) and max( ) work with Collection objects, not with Lists, so you don’t need to worry about whether the Collection should be sorted or not. (As mentioned earlier, you do need to sort( ) a List or an array before performing a binarySearch( ).) [ Add Comment ]

Making a Collection or Map unmodifiable

Often it is convenient to create a read-only version of a Collection or Map. The Collections class allows you to do this by passing the original container into a method that hands back a read-only version. There are four variations on this method, one each for Collection (if you don’t want to treat a Collection as a more specific type), List, Set, and Map. This example shows the proper way to build read-only versions of each:

//: c09:ReadOnly.java
// Using the Collections.unmodifiable methods.
import java.util.*;
import com.bruceeckel.util.*;

public class ReadOnly {
  static Collections2.StringGenerator gen = 
    Collections2.countries;
  public static void main(String[] args) {
    Collection c = new ArrayList();
    Collections2.fill(c, gen, 25); // Insert data
    c = Collections.unmodifiableCollection(c);
    System.out.println(c); // Reading is OK
    c.add("one"); // Can't change it
    
    List a = new ArrayList();
    Collections2.fill(a, gen.reset(), 25);
    a = Collections.unmodifiableList(a);
    ListIterator lit = a.listIterator();
    System.out.println(lit.next()); // Reading OK
    lit.add("one"); // Can't change it

    Set s = new HashSet();
    Collections2.fill(s, gen.reset(), 25);
    s = Collections.unmodifiableSet(s);
    System.out.println(s); // Reading OK
    //! s.add("one"); // Can't change it
    
    Map m = new HashMap();
    Collections2.fill(m,
      Collections2.geography, 25);
    m = Collections.unmodifiableMap(m);
    System.out.println(m); // Reading OK
    //! m.put("Ralph", "Howdy!");
  }
} ///:~

In each case, you must fill the container with meaningful data before you make it read-only. Once it is loaded, the best approach is to replace the existing reference with the reference that is produced by the “unmodifiable” call. That way, you don’t run the risk of accidentally changing the contents once you’ve made it unmodifiable. On the other hand, this tool also allows you to keep a modifiable container as private within a class and to return a read-only reference to that container from a method call. So you can change it from within the class, but everyone else can only read it. [ Add Comment ]

Calling the “unmodifiable” method for a particular type does not cause compile-time checking, but once the transformation has occurred, any calls to methods that modify the contents of a particular container will produce an UnsupportedOperationException. [ Add Comment ]

Synchronizing a Collection or Map

The synchronized keyword is an important part of the subject of multithreading, a more complicated topic that will not be introduced until Chapter 14. Here, I shall note only that the Collections class contains a way to automatically synchronize an entire container. The syntax is similar to the “unmodifiable” methods:

//: c09:Synchronization.java
// Using the Collections.synchronized methods.
import java.util.*;

public class Synchronization {
  public static void main(String[] args) {
    Collection c = 
      Collections.synchronizedCollection(
        new ArrayList());
    List list = Collections.synchronizedList(
      new ArrayList());
    Set s = Collections.synchronizedSet(
      new HashSet());
    Map m = Collections.synchronizedMap(
      new HashMap());
  }
} ///:~

In this case, you immediately pass the new container through the appropriate “synchronized” method; that way there’s no chance of accidentally exposing the unsynchronized version. [ Add Comment ]

Fail fast

The Java containers also have a mechanism to prevent more than one process from modifying the contents of a container. The problem occurs if you’re iterating through a container and some other process steps in and inserts, removes, or changes an object in that container. Maybe you’ve already passed that object, maybe it’s ahead of you, maybe the size of the container shrinks after you call size( )—there are many scenarios for disaster. The Java containers library incorporates a fail-fast mechanism that looks for any changes to the container other than the ones your process is personally responsible for. If it detects that someone else is modifying the container, it immediately produces a ConcurrentModificationException. This is the “fail-fast” aspect—it doesn’t try to detect a problem later on using a more complex algorithm. [ Add Comment ]

It’s quite easy to see the fail-fast mechanism in operation—all you have to do is create an iterator and then add something to the collection that the iterator is pointing to, like this:

//: c09:FailFast.java
// Demonstrates the "fail fast" behavior.
import java.util.*;

public class FailFast {
  public static void main(String[] args) {
    Collection c = new ArrayList();
    Iterator it = c.iterator();
    c.add("An object");
    // Causes an exception:
    String s = (String)it.next();
  }
} ///:~

The exception happens because something is placed in the container after the iterator is acquired from the container. The possibility that two parts of the program could be modifying the same container produces an uncertain state, so the exception notifies you that you should change your code—in this case, acquire the iterator after you have added all the elements to the container. [ Add Comment ]

Note that you cannot benefit from this kind of monitoring when you’re accessing the elements of a List using get( ). [ Add Comment ]

Unsupported operations

It’s possible to turn an array into a List with the Arrays.asList( ) method:

//: c09:Unsupported.java
// Sometimes methods defined in the
// Collection interfaces don't work!
import java.util.*;

public class Unsupported {
  private static String[] s = {
    "one", "two", "three", "four", "five",
    "six", "seven", "eight", "nine", "ten",
  };
  static List a = Arrays.asList(s);
  static List a2 = a.subList(3, 6);
  public static void main(String[] args) {
    System.out.println(a);
    System.out.println(a2);
    System.out.println(
      "a.contains(" + s[0] + ") = " + 
      a.contains(s[0]));
    System.out.println(
      "a.containsAll(a2) = " + 
      a.containsAll(a2));
    System.out.println("a.isEmpty() = " +
      a.isEmpty());
    System.out.println(
      "a.indexOf(" + s[5] + ") = " + 
      a.indexOf(s[5]));
    // Traverse backwards:
    ListIterator lit = a.listIterator(a.size());
    while(lit.hasPrevious())
      System.out.print(lit.previous() + " ");
    System.out.println();
    // Set the elements to different values:
    for(int i = 0; i < a.size(); i++)
      a.set(i, "47");
    System.out.println(a);
    // Compiles, but won't run:
    lit.add("X"); // Unsupported operation
    a.clear(); // Unsupported
    a.add("eleven"); // Unsupported
    a.addAll(a2); // Unsupported
    a.retainAll(a2); // Unsupported
    a.remove(s[0]); // Unsupported
    a.removeAll(a2); // Unsupported
  }
} ///:~

You’ll discover that only a portion of the Collection and List interfaces are actually implemented. The rest of the methods cause the unwelcome appearance of something called an UnsupportedOperationException. You’ll learn all about exceptions in the next chapter, but the short story is that the Collection interface—as well as some of the other interfaces in the Java containers library—contain “optional” methods, which might or might not be “supported” in the concrete class that implements that interface. Calling an unsupported method causes an UnsupportedOperationException to indicate a programming error. [ Add Comment ]

“What?!?” you say, incredulous. “The whole point of interfaces and base classes is that they promise these methods will do something meaningful! This breaks that promise—it says that not only will calling some methods not perform a meaningful behavior, they will stop the program! Type safety was just thrown out the window!” [ Add Comment ]

It’s not quite that bad. With a Collection, List, Set, or Map, the compiler still restricts you to calling only the methods in that interface, so it’s not like Smalltalk (in which you can call any method for any object, and find out only when you run the program whether your call does anything). In addition, most methods that take a Collection as an argument only read from that Collection—all the “read” methods of Collection are not optional. [ Add Comment ]

This approach prevents an explosion of interfaces in the design. Other designs for container libraries always seem to end up with a confusing plethora of interfaces to describe each of the variations on the main theme and are thus difficult to learn. It’s not even possible to capture all of the special cases in interfaces, because someone can always invent a new interface. The “unsupported operation” approach achieves an important goal of the Java containers library: the containers are simple to learn and use; unsupported operations are a special case that can be learned later. For this approach to work, however: [ Add Comment ]

  1. The UnsupportedOperationException must be a rare event. That is, for most classes all operations should work, and only in special cases should an operation be unsupported. This is true in the Java containers library, since the classes you’ll use 99 percent of the time—ArrayList, LinkedList, HashSet, and HashMap, as well as the other concrete implementations—support all of the operations. The design does provide a “back door” if you want to create a new Collection without providing meaningful definitions for all the methods in the Collection interface, and yet still fit it into the existing library. [ Add Comment ]
  2. When an operation is unsupported, there should be reasonable likelihood that an UnsupportedOperationException will appear at implementation time, rather than after you’ve shipped the product to the customer. After all, it indicates a programming error: you’ve used an implementation incorrectly. This point is less certain, and is where the experimental nature of this design comes into play. Only over time will we find out how well it works. [ Add Comment ]

In the example above, Arrays.asList( ) produces a List that is backed by a fixed-size array. Therefore it makes sense that the only supported operations are the ones that don’t change the size of the array. If, on the other hand, a new interface were required to express this different kind of behavior (called, perhaps, “FixedSizeList”), it would throw open the door to complexity and soon you wouldn’t know where to start when trying to use the library. [ Add Comment ]

The documentation for a method that takes a Collection, List, Set, or Map as an argument should specify which of the optional methods must be implemented. For example, sorting requires the set( ) and Iterator.set( ) methods, but not add( ) and remove( ). [ Add Comment ]

Java 1.0/1.1 containers

Unfortunately, a lot of code was written using the Java 1.0/1.1 containers, and even new code is sometimes written using these classes. So although you should never use the old containers when writing new code, you’ll still need to be aware of them. However, the old containers were quite limited, so there’s not that much to say about them. (Since they are in the past, I will try to refrain from overemphasizing some of the hideous design decisions.) [ Add Comment ]

Vector & Enumeration

The only self-expanding sequence in Java 1.0/1.1 was the Vector, and so it saw a lot of use. Its flaws are too numerous to describe here (see the first edition of this book, available on this book’s CD ROM and as a free download from www.BruceEckel.com). Basically, you can think of it as an ArrayList with long, awkward method names. In the Java 2 container library, Vector was adapted so that it could fit as a Collection and a List, so in the following example the Collections2.fill( ) method is successfully used. This turns out to be a bit perverse, as it may confuse some people into thinking that Vector has gotten better, when it is actually included only to support pre-Java 2 code. [ Add Comment ]

The Java 1.0/1.1 version of the iterator chose to invent a new name, “enumeration,” instead of using a term that everyone was already familiar with. The Enumeration interface is smaller than Iterator, with only two methods, and it uses longer method names: boolean hasMoreElements( ) produces true if this enumeration contains more elements, and Object nextElement( ) returns the next element of this enumeration if there are any more (otherwise it throws an exception). [ Add Comment ]

Enumeration is only an interface, not an implementation, and even new libraries sometimes still use the old Enumeration—which is unfortunate but generally harmless. Even though you should always use Iterator when you can in your own code, you must be prepared for libraries that want to hand you an Enumeration. [ Add Comment ]

In addition, you can produce an Enumeration for any Collection by using the Collections.enumeration( ) method, as seen in this example:

//: c09:Enumerations.java
// Java 1.0/1.1 Vector and Enumeration.
import java.util.*;
import com.bruceeckel.util.*;

public class Enumerations {
  public static void main(String[] args) {
    Vector v = new Vector();
    Collections2.fill(
      v, Collections2.countries, 100);
    Enumeration e = v.elements();
    while(e.hasMoreElements())
      System.out.println(e.nextElement());
    // Produce an Enumeration from a Collection:
    e = Collections.enumeration(new ArrayList());
  }
} ///:~

The Java 1.0/1.1 Vector has only an addElement( ) method, but fill( ) uses the add( ) method that was pasted on as Vector was turned into a List. To produce an Enumeration, you call elements( ), then you can use it to perform a forward iteration. [ Add Comment ]

The last line creates an ArrayList and uses enumeration( ) to adapt an Enumeration from the ArrayList Iterator. Thus, if you have old code that wants an Enumeration, you can still use the new containers. [ Add Comment ]

Hashtable

As you’ve seen in the performance comparison in this chapter, the basic Hashtable is very similar to the HashMap, even down to the method names. There’s no reason to use Hashtable instead of HashMap in new code. [ Add Comment ]

Stack

The concept of the stack was introduced earlier, with the LinkedList. What’s rather odd about the Java 1.0/1.1 Stack is that instead of using a Vector as a building block, Stack is inherited from Vector. So it has all of the characteristics and behaviors of a Vector plus some extra Stack behaviors. It’s difficult to know whether the designers explicitly decided that this was an especially useful way of doing things, or whether it was just a naive design. [ Add Comment ]

Here’s a simple demonstration of Stack that pushes each line from a String array:

//: c09:Stacks.java
// Demonstration of Stack Class.
import java.util.*;

public class Stacks {
  static String[] months = { 
    "January", "February", "March", "April",
    "May", "June", "July", "August", "September",
    "October", "November", "December" };
  public static void main(String[] args) {
    Stack stk = new Stack();
    for(int i = 0; i < months.length; i++)
      stk.push(months[i] + " ");
    System.out.println("stk = " + stk);
    // Treating a stack as a Vector:
    stk.addElement("The last line");
    System.out.println(
      "element 5 = " + stk.elementAt(5));
    System.out.println("popping elements:");
    while(!stk.empty())
      System.out.println(stk.pop());
  }
} ///:~

Each line in the months array is inserted into the Stack with push( ), and later fetched from the top of the stack with a pop( ). To make a point, Vector operations are also performed on the Stack object. This is possible because, by virtue of inheritance, a Stack is a Vector. Thus, all operations that can be performed on a Vector can also be performed on a Stack, such as elementAt( ). [ Add Comment ]

As mentioned earlier, you should use a LinkedList when you want stack behavior. [ Add Comment ]

BitSet

A BitSet is used if you want to efficiently store a lot of on-off information. It’s efficient only from the standpoint of size; if you’re looking for efficient access, it is slightly slower than using an array of some native type. [ Add Comment ]

In addition, the minimum size of the BitSet is that of a long: 64 bits. This implies that if you’re storing anything smaller, like 8 bits, a BitSet will be wasteful; you’re better off creating your own class, or just an array, to hold your flags if size is an issue. [ Add Comment ]

A normal container expands as you add more elements, and the BitSet does this as well. The following example shows how the BitSet works:

//: c09:Bits.java
// Demonstration of BitSet.
import java.util.*;

public class Bits {
  static void printBitSet(BitSet b) {
    System.out.println("bits: " + b);
    String bbits = new String();
    for(int j = 0; j < b.size() ; j++)
      bbits += (b.get(j) ? "1" : "0");
    System.out.println("bit pattern: " + bbits);
  }
  public static void main(String[] args) {
    Random rand = new Random();
    // Take the LSB of nextInt():
    byte bt = (byte)rand.nextInt();
    BitSet bb = new BitSet();
    for(int i = 7; i >=0; i--)
      if(((1 << i) &  bt) != 0)
        bb.set(i);
      else
        bb.clear(i);
    System.out.println("byte value: " + bt);
    printBitSet(bb);

    short st = (short)rand.nextInt();
    BitSet bs = new BitSet();
    for(int i = 15; i >=0; i--)
      if(((1 << i) &  st) != 0)
        bs.set(i);
      else
        bs.clear(i);
    System.out.println("short value: " + st);
    printBitSet(bs);

    int it = rand.nextInt();
    BitSet bi = new BitSet();
    for(int i = 31; i >=0; i--)
      if(((1 << i) &  it) != 0)
        bi.set(i);
      else
        bi.clear(i);
    System.out.println("int value: " + it);
    printBitSet(bi);

    // Test bitsets >= 64 bits:
    BitSet b127 = new BitSet();
    b127.set(127);
    System.out.println("set bit 127: " + b127);
    BitSet b255 = new BitSet(65);
    b255.set(255);
    System.out.println("set bit 255: " + b255);
    BitSet b1023 = new BitSet(512);
    b1023.set(1023);
    b1023.set(1024);
    System.out.println("set bit 1023: " + b1023);
  }
} ///:~

The random number generator is used to create a random byte, short, and int, and each one is transformed into a corresponding bit pattern in a BitSet. This works fine because a BitSet is 64 bits, so none of these cause it to increase in size. Then a BitSet of 512 bits is created. The constructor allocates storage for twice that number of bits. However, you can still set bit 1024 or greater. [ Add Comment ]

Summary

To review the containers provided in the standard Java library: [ Add Comment ]

  1. An array associates numerical indices to objects. It holds objects of a known type so that you don’t have to cast the result when you’re looking up an object. It can be multidimensional, and it can hold primitives. However, its size cannot be changed once you create it. [ Add Comment ]
  2. A Collection holds single elements, while a Map holds associated pairs. [ Add Comment ]
  3. Like an array, a List also associates numerical indices to objects—you can think of arrays and Lists as ordered containers. The List automatically resizes itself as you add more elements. But a List can hold only Object references, so it won’t hold primitives and you must always cast the result when you pull an Object reference out of a container. [ Add Comment ]
  4. Use an ArrayList if you’re doing a lot of random accesses, and a LinkedList if you will be doing a lot of insertions and removals in the middle of the list. [ Add Comment ]
  5. The behavior of queues, deques, and stacks is provided via the LinkedList. [ Add Comment ]
  6. A Map is a way to associate not numbers, but objects with other objects. The design of a HashMap is focused on rapid access, while a TreeMap keeps its keys in sorted order, and thus is not as fast as a HashMap. [ Add Comment ]
  7. A Set only accepts one of each type of object. HashSets provide maximally fast lookups, while TreeSets keep the elements in sorted order. [ Add Comment ]
  8. There’s no need to use the legacy classes Vector, Hashtable and Stack in new code. [ Add Comment ]

The containers are tools that you can use on a day-to-day basis to make your programs simpler, more powerful, and more effective. [ Add Comment ]

Exercises

Solutions to selected exercises can be found in the electronic document The Thinking in Java Annotated Solution Guide, available for a small fee from www.BruceEckel.com.

  1. Create an array of double and fill( ) it using RandDoubleGenerator. Print the results. [ Add Comment ]
  2. Create a new class called Gerbil with an int gerbilNumber that’s initialized in the constructor (similar to the Mouse example in this chapter). Give it a method called hop( ) that prints out which gerbil number this is, and that it’s hopping. Create an ArrayList and add a bunch of Gerbil objects to the List. Now use the get( ) method to move through the List and call hop( ) for each Gerbil. [ Add Comment ]
  3. Modify Exercise 2 so you use an Iterator to move through the List while calling hop( ). [ Add Comment ]
  4. Take the Gerbil class in Exercise 2 and put it into a Map instead, associating the name of the Gerbil as a String (the key) for each Gerbil (the value) you put in the table. Get an Iterator for the keySet( ) and use it to move through the Map, looking up the Gerbil for each key and printing out the key and telling the gerbil to hop( ). [ Add Comment ]
  5. Create a List (try both ArrayList and LinkedList) and fill it using Collections2.countries. Sort the list and print it, then apply Collections.shuffle( ) to the list repeatedly, printing it each time so that you can see how the shuffle( ) method randomizes the list differently each time. [ Add Comment ]
  6. Demonstrate that you can’t add anything but a Mouse to a MouseList. [ Add Comment ]
  7. Modify MouseList.java so that it inherits from ArrayList instead of using composition. Demonstrate the problem with this approach. [ Add Comment ]
  8. Repair CatsAndDogs.java by creating a Cats container (utilizing ArrayList) that will only accept and retrieve Cat objects. [ Add Comment ]
  9. Create a container that encapsulates an array of String, and that only adds Strings and gets Strings, so that there are no casting issues during use. If the internal array isn’t big enough for the next add, your container should automatically resize it. In main( ), compare the performance of your container with an ArrayList holding Strings. [ Add Comment ]
  10. Repeat Exercise 9 for a container of int, and compare the performance to an ArrayList holding Integer objects. In your performance comparison, include the process of incrementing each object in the container. [ Add Comment ]
  11. Using the utilities in com.bruceeckel.util, create an array of each primitive type and of String, then fill each array using an appropriate generator, and print each array using the appropriate print( ) method. [ Add Comment ]
  12. Create a generator that produces character names from your favorite movies (you can use Snow White or Star Wars as a fallback), and loops around to the beginning when it runs out of names. Use the utilities in com.bruceeckel.util to fill an array, an ArrayList, a LinkedList and both types of Set, then print each container. [ Add Comment ]
  13. Create a class containing two String objects, and make it Comparable so that the comparison only cares about the first String. Fill an array and an ArrayList with objects of your class, using the geography generator. Demonstrate that sorting works properly. Now make a Comparator that only cares about the second String and demonstrate that sorting works properly; also perform a binary search using your Comparator. [ Add Comment ]
  14. Modify Exercise 13 so that an alphabetic sort is used. [ Add Comment ]
  15. Use Arrays2.RandStringGenerator to fill a TreeSet but using alphabetic ordering. Print the TreeSet to verify the sort order. [ Add Comment ]
  16. Create both an ArrayList and a LinkedList, and fill each using the Collections2.capitals generator. Print each list using an ordinary Iterator, then insert one list into the other using a ListIterator, inserting at every other location. Now perform the insertion starting at the end of the first list and moving backward. [ Add Comment ]
  17. Write a method that uses an Iterator to step through a Collection and print the hashCode( ) of each object in the container. Fill all the different types of Collections with objects and apply your method to each container. [ Add Comment ]
  18. Repair the problem in InfiniteRecursion.java. [ Add Comment ]
  19. Create a class, then make an initialized array of objects of your class. Fill a List from your array. Create a subset of your List using subList( ), and then remove this subset from your List using removeAll( ). [ Add Comment ]
  20. Change Exercise 6 in Chapter 7 to use an ArrayList to hold the Rodents and an Iterator to move through the sequence of Rodents. Remember that an ArrayList holds only Objects so you must use a cast when accessing individual Rodents. [ Add Comment ]
  21. Following the Queue.java example, create a Deque class and test it. [ Add Comment ]
  22. Use a TreeMap in Statistics.java. Now add code that tests the performance difference between HashMap and TreeMap in that program. [ Add Comment ]
  23. Produce a Map and a Set containing all the countries that begin with ‘A.’ [ Add Comment ]
  24. Using Collections2.countries, fill a Set multiple times with the same data and verify that the Set ends up with only one of each instance. Try this with both kinds of Set. [ Add Comment ]
  25. Starting with Statistics.java, create a program that runs the test repeatedly and looks to see if any one number tends to appear more than the others in the results. [ Add Comment ]
  26. Rewrite Statistics.java using a HashSet of Counter objects (you’ll have to modify Counter so that it will work in the HashSet). Which approach seems better? [ Add Comment ]
  27. Modify the class in Exercise 13 so that it will work with HashSets and as a key in HashMaps. [ Add Comment ]
  28. Using SlowMap.java for inspiration, create a SlowSet. [ Add Comment ]
  29. Apply the tests in Map1.java to SlowMap to verify that it works. Fix anything in SlowMap that doesn’t work correctly. [ Add Comment ]
  30. Implement the rest of the Map interface for SlowMap. [ Add Comment ]
  31. Modify MapPerformance.java to include tests of SlowMap. [ Add Comment ]
  32. Modify SlowMap so that instead of two ArrayLists, it holds a single ArrayList of MPair objects. Verify that the modified version works correctly. Using MapPerformance.java, test the speed of your new Map. Now change the put( ) method so that it performs a sort( ) after each pair is entered, and modify get( ) to use Collections.binarySearch( ) to look up the key. Compare the performance of the new version with the old ones. [ Add Comment ]
  33. Add a char field to CountedString that is also initialized in the constructor, and modify the hashCode( ) and equals( ) methods to include the value of this char. [ Add Comment ]
  34. Modify SimpleHashMap so that it reports collisions, and test this by adding the same data set twice so that you see collisions. [ Add Comment ]
  35. Modify SimpleHashMap so that it reports the number of “probes” necessary when collisions occur. That is, how many calls to next( ) must be made on the Iterators that walk the LinkedLists looking for matches? [ Add Comment ]
  36. Implement the clear( ) and remove( ) methods for SimpleHashMap. [ Add Comment ]
  37. Implement the rest of the Map interface for SimpleHashMap. [ Add Comment ]
  38. Add a private rehash( ) method to SimpleHashMap that is invoked when the load factor exceeds 0.75. During rehashing, double the number of buckets, then search for the first prime number greater than that to determine the new number of buckets. [ Add Comment ]
  39. Following the example in SimpleHashMap.java, create and test a SimpleHashSet. [ Add Comment ]
  40. Modify SimpleHashMap to use ArrayLists instead of LinkedLists. Modify MapPerformance.java to compare the performance of the two implementations. [ Add Comment ]
  41. Using the HTML documentation for the JDK (downloadable from java.sun.com), look up the HashMap class. Create a HashMap, fill it with elements, and determine the load factor. Test the lookup speed with this map, then attempt to increase the speed by making a new HashMap with a larger initial capacity and copying the old map into the new one, running your lookup speed test again on the new map. [ Add Comment ]
  42. In Chapter 8, locate the GreenhouseControls.java example, which consists of three files. In Controller.java, the class EventSet is just a container. Change the code to use a LinkedList instead of an EventSet. This will require more than just replacing EventSet with LinkedList; you’ll also need to use an Iterator to cycle through the set of events. [ Add Comment ]
  43. (Challenging). Write your own hashed map class, customized for a particular key type: String for this example. Do not inherit it from Map. Instead, duplicate the methods so that the put( ) and get( ) methods specifically take String objects, not Objects, as keys. Everything that involves keys should not use generic types, but instead work with Strings, to avoid the cost of upcasting and downcasting. Your goal is to make the fastest possible custom implementation. Modify MapPerformance.java to test your implementation vs. a HashMap. [ Add Comment ]
  44. (Challenging). Find the source code for List in the Java source code library that comes with all Java distributions. Copy this code and make a special version called intList that holds only ints. Consider what it would take to make a special version of List for all the primitive types. Now consider what happens if you want to make a linked list class that works with all the primitive types. If parameterized types are ever implemented in Java, they will provide a way to do this work for you automatically (as well as many other benefits). [ Add Comment ]
  45. Modify c08:Month2.java to make it implement the Comparable interface.Add Comment ]
  46. Modify the hashCode( ) in CountedString.java by removing the multiplication by id, and demonstrate that CountedString still works as a key. What is the problem with this approach?Add Comment ]

[44] It’s possible, however, to ask how big the vector is, and the at( ) method does perform bounds checking.

[45] This is one of the places where C++ is distinctly superior to Java, since C++ supports parameterized types with the template keyword.

[46] The C++ programmer will note how much the code could be collapsed with the use of default arguments and templates. The Python programmer will note that this entire library would be largely unnecessary in that language.

[47] By Joshua Bloch at Sun.

[48] This data was found on the Internet, then processed by creating a Python program (see www.Python.org).

[49] This is a place where operator overloading would be nice.

[50] If these speedups still don’t meet your performance needs, you can further accelerate table lookup by writing your own Map and customizing it to your particular types to avoid delays due to casting to and from Objects. To reach even higher levels of performance, speed enthusiasts can use Donald Knuth’s The Art of Computer Programming, Volume 3: Sorting and Searching, Second Edition to replace overflow bucket lists with arrays that have two additional benefits: they can be optimized for disk storage characteristics and they can save most of the time of creating and garbage collecting individual records.

[ Previous Chapter ] [ Short TOC ] [ Table of Contents ] [ Index ] [ Next Chapter ]
Last Update:05/21/2001