MindView Inc.
[ Viewing Hints ] [ Revision History ] [ Book Home Page ] [ Free Newsletter ]
[ Seminars ] [ Seminars on CD ROM ] [ Consulting ]

Thinking in Java, 2nd edition, Revision 12

©2000 by Bruce Eckel

[ Previous Chapter ] [ Short TOC ] [ Table of Contents ] [ Index ] [ Next Chapter ]

2: Everything
is an Object

Although it is based on C++, Java is more of a “pure” object-oriented language.

Both C++ and Java are hybrid languages, but in Java the designers felt that the hybridization was not as important as it was in C++. A hybrid language allows multiple programming styles; the reason C++ is hybrid is to support backward compatibility with the C language. Because C++ is a superset of the C language, it includes many of that language’s undesirable features, which can make some aspects of C++ overly complicated. [ Add Comment ]

The Java language assumes that you want to do only object-oriented programming. This means that before you can begin you must shift your mindset into an object-oriented world (unless it’s already there). The benefit of this initial effort is the ability to program in a language that is simpler to learn and to use than many other OOP languages. In this chapter we’ll see the basic components of a Java program and we’ll learn that everything in Java is an object, even a Java program. [ Add Comment ]

You manipulate objects
with references

Each programming language has its own means of manipulating data. Sometimes the programmer must be constantly aware of what type of manipulation is going on. Are you manipulating the object directly, or are you dealing with some kind of indirect representation (a pointer in C or C++) that must be treated with a special syntax? [ Add Comment ]

All this is simplified in Java. You treat everything as an object, so there is a single consistent syntax that you use everywhere. Although you treat everything as an object, the identifier you manipulate is actually a “reference” to an object[20]. You might imagine this scene as a television (the object) with your remote control (the reference). As long as you’re holding this reference, you have a connection to the television, but when someone says “change the channel” or “lower the volume,” what you’re manipulating is the reference, which in turn modifies the object. If you want to move around the room and still control the television, you take the remote/reference with you, not the television. [ Add Comment ]

Also, the remote control can stand on its own, with no television. That is, just because you have a reference doesn’t mean there’s necessarily an object connected to it. So if you want to hold a word or sentence, you create a String reference:Add Comment ]

String s;

But here you’ve created only the reference, not an object. If you decided to send a message to s at this point, you’ll get an error (at run-time) because s isn’t actually attached to anything (there’s no television). A safer practice, then, is always to initialize a reference when you create it: [ Add Comment ]

String s = "asdf";

However, this uses a special Java feature: strings can be initialized with quoted text. Normally, you must use a more general type of initialization for objects.Add Comment ]

You must create
all the objects

When you create a reference, you want to connect it with a new object. You do so, in general, with the new keyword. new says, “Make me a new one of these objects.” So in the above example, you can say: [ Add Comment ]

String s = new String("asdf");

Not only does this mean “Make me a new String,” but it also gives information about how to make the String by supplying an initial character string. [ Add Comment ]

Of course, String is not the only type that exists. Java comes with a plethora of ready-made types. What’s more important is that you can create your own types. In fact, that’s the fundamental activity in Java programming, and it’s what you’ll be learning about in the rest of this book. [ Add Comment ]

Where storage lives

It’s useful to visualize some aspects of how things are laid out while the program is running, in particular how memory is arranged. There are six different places to store data: [ Add Comment ]

  1. Registers. This is the fastest storage because it exists in a place different from that of other storage: inside the processor. However, the number of registers is severely limited, so registers are allocated by the compiler according to its needs. You don’t have direct control, nor do you see any evidence in your programs that registers even exist. [ Add Comment ]
  2. The stack. This lives in the general RAM (random-access memory) area, but has direct support from the processor via its stack pointer. The stack pointer is moved down to create new memory and moved up to release that memory. This is an extremely fast and efficient way to allocate storage, second only to registers. The Java compiler must know, while it is creating the program, the exact size and lifetime of all the data that is stored on the stack, because it must generate the code to move the stack pointer up and down. This constraint places limits on the flexibility of your programs, so while some Java storage exists on the stack—in particular, object references—Java objects themselves are not placed on the stack. [ Add Comment ]
  3. The heap. This is a general-purpose pool of memory (also in the RAM area) where all Java objects live. The nice thing about the heap is that, unlike the stack, the compiler doesn’t need to know how much storage it needs to allocate from the heap or how long that storage must stay on the heap. Thus, there’s a great deal of flexibility in using storage on the heap. Whenever you need to create an object, you simply write the code to create it using new, and the storage is allocated on the heap when that code is executed. Of course there’s a price you pay for this flexibility: it takes more time to allocate heap storage than it does to allocate stack storage (that is, if you even could create objects on the stack in Java, as you can in C++). [ Add Comment ]
  4. Static storage. “Static” is used here in the sense of “in a fixed location” (although it’s also in RAM). Static storage contains data that is available for the entire time a program is running. You can use the static keyword to specify that a particular element of an object is static, but Java objects themselves are never placed in static storage. [ Add Comment ]
  5. Constant storage. Constant values are often placed directly in the program code, which is safe since they can never change. Sometimes constants are cordoned off by themselves so that they can be optionally placed in read-only memory (ROM). [ Add Comment ]
  6. Non-RAM storage. If data lives completely outside a program it can exist while the program is not running, outside the control of the program. The two primary examples of this are streamed objects, in which objects are turned into streams of bytes, generally to be sent to another machine, and persistent objects, in which the objects are placed on disk so they will hold their state even when the program is terminated. The trick with these types of storage is turning the objects into something that can exist on the other medium, and yet can be resurrected into a regular RAM-based object when necessary. Java provides support for lightweight persistence, and future versions of Java might provide more complete solutions for persistence. [ Add Comment ]

Special case: primitive types

There is a group of types that gets special treatment; you can think of these as “primitive” types that you use quite often in your programming. The reason for the special treatment is that to create an object with new—especially a small, simple variable—isn’t very efficient because new places objects on the heap. For these types Java falls back on the approach taken by C and C++. That is, instead of creating the variable using new, an “automatic” variable is created that is not a reference. The variable holds the value, and it’s placed on the stack so it’s much more efficient. [ Add Comment ]

Java determines the size of each primitive type. These sizes don’t change from one machine architecture to another as they do in most languages. This size invariance is one reason Java programs are so portable. [ Add Comment ]

Primitive type

Size

Minimum

Maximum

Wrapper type

boolean




Boolean

char

16-bit

Unicode 0

Unicode 216- 1

Character

byte

8-bit

-128

+127

Byte

short

16-bit

-215

+215—1

Short

int

32-bit

-231

+231—1

Integer

long

64-bit

-263

+263—1

Long

float

32-bit

IEEE754

IEEE754

Float

double

64-bit

IEEE754

IEEE754

Double

void




Void

All numeric types are signed, so don’t go looking for unsigned types. [ Add Comment ]

The size of the boolean type is not explicitly defined; it is only specified to be able to take the literal values true or false.

The primitive data types also have “wrapper” classes for them. That means that if you want to make a nonprimitive object on the heap to represent that primitive type, you use the associated wrapper. For example: [ Add Comment ]

char c = 'x';
Character C = new Character(c);

Or you could also use:

Character C = new Character('x');

The reasons for doing this will be shown in a later chapter. [ Add Comment ]

High-precision numbers

Java includes two classes for performing high-precision arithmetic: BigInteger and BigDecimal. Although these approximately fit into the same category as the “wrapper” classes, neither one has a primitive analogue. [ Add Comment ]

Both classes have methods that provide analogues for the operations that you perform on primitive types. That is, you can do anything with a BigInteger or BigDecimal that you can with an int or float, it’s just that you must use method calls instead of operators. Also, since there’s more involved, the operations will be slower. You’re exchanging speed for accuracy. [ Add Comment ]

BigInteger supports arbitrary-precision integers. This means that you can accurately represent integral values of any size without losing any information during operations. [ Add Comment ]

BigDecimal is for arbitrary-precision fixed-point numbers; you can use these for accurate monetary calculations, for example. [ Add Comment ]

Consult your online documentation for details about the constructors and methods you can call for these two classes. [ Add Comment ]

Arrays in Java

Virtually all programming languages support arrays. Using arrays in C and C++ is perilous because those arrays are only blocks of memory. If a program accesses the array outside of its memory block or uses the memory before initialization (common programming errors) there will be unpredictable results. [ Add Comment ]

One of the primary goals of Java is safety, so many of the problems that plague programmers in C and C++ are not repeated in Java. A Java array is guaranteed to be initialized and cannot be accessed outside of its range. The range checking comes at the price of having a small amount of memory overhead on each array as well as verifying the index at run-time, but the assumption is that the safety and increased productivity is worth the expense. [ Add Comment ]

When you create an array of objects, you are really creating an array of references, and each of those references is automatically initialized to a special value with its own keyword: null. When Java sees null, it recognizes that the reference in question isn’t pointing to an object. You must assign an object to each reference before you use it, and if you try to use a reference that’s still null, the problem will be reported at run-time. Thus, typical array errors are prevented in Java. [ Add Comment ]

You can also create an array of primitives. Again, the compiler guarantees initialization because it zeroes the memory for that array. [ Add Comment ]

Arrays will be covered in detail in later chapters. [ Add Comment ]

You never need to
destroy an object

In most programming languages, the concept of the lifetime of a variable occupies a significant portion of the programming effort. How long does the variable last? If you are supposed to destroy it, when should you? Confusion over variable lifetimes can lead to a lot of bugs, and this section shows how Java greatly simplifies the issue by doing all the cleanup work for you. [ Add Comment ]

Scoping

Most procedural languages have the concept of scope. This determines both the visibility and lifetime of the names defined within that scope. In C, C++, and Java, scope is determined by the placement of curly braces {}. So for example: [ Add Comment ]

{
  int x = 12;
  /* only x available */
  {
    int q = 96;
    /* both x & q available */
  }
  /* only x available */
  /* q “out of scope” */
}

A variable defined within a scope is available only to the end of that scope. [ Add Comment ]

Indentation makes Java code easier to read. Since Java is a free-form language, the extra spaces, tabs, and carriage returns do not affect the resulting program. [ Add Comment ]

Note that you cannot do the following, even though it is legal in C and C++:

{
  int x = 12;
  {
    int x = 96; /* illegal */
  }
}

The compiler will announce that the variable x has already been defined. Thus the C and C++ ability to “hide” a variable in a larger scope is not allowed because the Java designers thought that it led to confusing programs. [ Add Comment ]

Scope of objects

Java objects do not have the same lifetimes as primitives. When you create a Java object using new, it hangs around past the end of the scope. Thus if you use:

{
  String s = new String("a string");
} /* end of scope */

the reference s vanishes at the end of the scope. However, the String object that s was pointing to is still occupying memory. In this bit of code, there is no way to access the object because the only reference to it is out of scope. In later chapters you’ll see how the reference to the object can be passed around and duplicated during the course of a program. [ Add Comment ]

It turns out that because objects created with new stay around for as long as you want them, a whole slew of C++ programming problems simply vanish in Java. The hardest problems seem to occur in C++ because you don’t get any help from the language in making sure that the objects are available when they’re needed. And more important, in C++ you must make sure that you destroy the objects when you’re done with them. [ Add Comment ]

That brings up an interesting question. If Java leaves the objects lying around, what keeps them from filling up memory and halting your program? This is exactly the kind of problem that would occur in C++. This is where a bit of magic happens. Java has a garbage collector, which looks at all the objects that were created with new and figures out which ones are not being referenced anymore. Then it releases the memory for those objects, so the memory can be used for new objects. This means that you never need to worry about reclaiming memory yourself. You simply create objects, and when you no longer need them they will go away by themselves. This eliminates a certain class of programming problem: the so-called “memory leak,” in which a programmer forgets to release memory. [ Add Comment ]

Creating new
data types: class

If everything is an object, what determines how a particular class of object looks and behaves? Put another way, what establishes the type of an object? You might expect there to be a keyword called “type,” and that certainly would have made sense. Historically, however, most object-oriented languages have used the keyword class to mean “I’m about to tell you what a new type of object looks like.” The class keyword (which is so common that it will not be emboldened throughout this book) is followed by the name of the new type. For example: [ Add Comment ]

class ATypeName { /* class body goes here */ }

This introduces a new type, so you can now create an object of this type using new:

ATypeName a = new ATypeName();

In ATypeName, the class body consists only of a comment (the stars and slashes and what is inside, which will be discussed later in this chapter), so there is not too much that you can do with it. In fact, you cannot tell it to do much of anything (that is, you cannot send it any interesting messages) until you define some methods for it. [ Add Comment ]

Fields and methods

When you define a class (and all you do in Java is define classes, make objects of those classes, and send messages to those objects), you can put two types of elements in your class: data members (sometimes called fields), and member functions (typically called methods). A data member is an object of any type that you can communicate with via its reference. It can also be one of the primitive types (which isn’t a reference). If it is a reference to an object, you must initialize that reference to connect it to an actual object (using new, as seen earlier) in a special function called a constructor (described fully in Chapter 4). If it is a primitive type you can initialize it directly at the point of definition in the class. (As you’ll see later, references can also be initialized at the point of definition.) [ Add Comment ]

Each object keeps its own storage for its data members; the data members are not shared among objects. Here is an example of a class with some data members: [ Add Comment ]

class DataOnly {
  int i;
  float f;
  boolean b;
}

This class doesn’t do anything, but you can create an object: [ Add Comment ]

DataOnly d = new DataOnly();

You can assign values to the data members, but you must first know how to refer to a member of an object. This is accomplished by stating the name of the object reference, followed by a period (dot), followed by the name of the member inside the object: [ Add Comment ]

objectReference.member

For example: [ Add Comment ]

d.i = 47;
d.f = 1.1f;
d.b = false;

It is also possible that your object might contain other objects that contain data you’d like to modify. For this, you just keep “connecting the dots.” For example: [ Add Comment ]

myPlane.leftTank.capacity = 100;

The DataOnly class cannot do much of anything except hold data, because it has no member functions (methods). To understand how those work, you must first understand arguments and return values, which will be described shortly. [ Add Comment ]

Default values for primitive members

When a primitive data type is a member of a class, it is guaranteed to get a default value if you do not initialize it:

Primitive type

Default

boolean

false

char

‘\u0000’ (null)

byte

(byte)0

short

(short)0

int

0

long

0L

float

0.0f

double

0.0d

Note carefully that the default values are what Java guarantees when the variable is used as a member of a class. This ensures that member variables of primitive types will always be initialized (something C++ doesn’t do), reducing a source of bugs. However, this initial value may not be correct or even legal for the program you are writing. It’s best to always explicitly initialize your variables. [ Add Comment ]

This guarantee doesn’t apply to “local” variables—those that are not fields of a class. Thus, if within a function definition you have:

int x;

Then x will get some arbitrary value (as in C and C++); it will not automatically be initialized to zero. You are responsible for assigning an appropriate value before you use x. If you forget, Java definitely improves on C++: you get a compile-time error telling you the variable might not have been initialized. (Many C++ compilers will warn you about uninitialized variables, but in Java these are errors.) [ Add Comment ]

Methods, arguments,
and return values

Up until now, the term function has been used to describe a named subroutine. The term that is more commonly used in Java is method, as in “a way to do something.” If you want, you can continue thinking in terms of functions. It’s really only a syntactic difference, but from now on “method” will be used in this book rather than “function.” [ Add Comment ]

Methods in Java determine the messages an object can receive. In this section you will learn how simple it is to define a method. [ Add Comment ]

The fundamental parts of a method are the name, the arguments, the return type, and the body. Here is the basic form:

returnType methodName( /* Argument list */ ) {
  /* Method body */
}

The return type is the type of the value that pops out of the method after you call it. The argument list gives the types and names for the information you want to pass into the method. The method name and argument list together uniquely identify the method. [ Add Comment ]

Methods in Java can be created only as part of a class. A method can be called only for an object,[21] and that object must be able to perform that method call. If you try to call the wrong method for an object, you’ll get an error message at compile-time. You call a method for an object by naming the object followed by a period (dot), followed by the name of the method and its argument list, like this: objectName.methodName(arg1, arg2, arg3). For example, suppose you have a method f( ) that takes no arguments and returns a value of type int. Then, if you have an object called a for which f( ) can be called, you can say this:

int x = a.f();

The type of the return value must be compatible with the type of x. [ Add Comment ]

This act of calling a method is commonly referred to as sending a message to an object. In the above example, the message is f( ) and the object is a. Object-oriented programming is often summarized as simply “sending messages to objects.” [ Add Comment ]

The argument list

The method argument list specifies what information you pass into the method. As you might guess, this information—like everything else in Java—takes the form of objects. So, what you must specify in the argument list are the types of the objects to pass in and the name to use for each one. As in any situation in Java where you seem to be handing objects around, you are actually passing references[22]. The type of the reference must be correct, however. If the argument is supposed to be a String, what you pass in must be a string. [ Add Comment ]

Consider a method that takes a String as its argument. Here is the definition, which must be placed within a class definition for it to be compiled:

int storage(String s) {
  return s.length() * 2;
}

This method tells you how many bytes are required to hold the information in a particular String. (Each char in a String is 16 bits, or two bytes, long, to support Unicode characters.) The argument is of type String and is called s. Once s is passed into the method, you can treat it just like any other object. (You can send messages to it.) Here, the length( ) method is called, which is one of the methods for Strings; it returns the number of characters in a string. [ Add Comment ]

You can also see the use of the return keyword, which does two things. First, it means “leave the method, I’m done.” Second, if the method produces a value, that value is placed right after the return statement. In this case, the return value is produced by evaluating the expression s.length( ) * 2. [ Add Comment ]

You can return any type you want, but if you don’t want to return anything at all, you do so by indicating that the method returns void. Here are some examples:

boolean flag() { return true; }
float naturalLogBase() { return 2.718f; }
void nothing() { return; }
void nothing2() {}

When the return type is void, then the return keyword is used only to exit the method, and is therefore unnecessary when you reach the end of the method. You can return from a method at any point, but if you’ve given a non-void return type then the compiler will force you (with error messages) to return the appropriate type of value regardless of where you return. [ Add Comment ]

At this point, it can look like a program is just a bunch of objects with methods that take other objects as arguments and send messages to those other objects. That is indeed much of what goes on, but in the following chapter you’ll learn how to do the detailed low-level work by making decisions within a method. For this chapter, sending messages will suffice. [ Add Comment ]

Building a Java program

There are several other issues you must understand before seeing your first Java program. [ Add Comment ]

Name visibility

A problem in any programming language is the control of names. If you use a name in one module of the program, and another programmer uses the same name in another module, how do you distinguish one name from another and prevent the two names from “clashing?” In C this is a particular problem because a program is often an unmanageable sea of names. C++ classes (on which Java classes are based) nest functions within classes so they cannot clash with function names nested within other classes. However, C++ still allowed global data and global functions, so clashing was still possible. To solve this problem, C++ introduced namespaces using additional keywords. [ Add Comment ]

Java was able to avoid all of this by taking a fresh approach. To produce an unambiguous name for a library, the specifier used is not unlike an Internet domain name. In fact, the Java creators want you to use your Internet domain name in reverse since those are guaranteed to be unique. Since my domain name is BruceEckel.com, my utility library of foibles would be named com.bruceeckel.utility.foibles. After your reversed domain name, the dots are intended to represent subdirectories. [ Add Comment ]

In Java 1.0 and Java 1.1 the domain extensions com, edu, org, net, etc., were capitalized by convention, so the library would appear: COM.bruceeckel.utility.foibles. Partway through the development of Java 2, however, it was discovered that this caused problems, and so now the entire package name is lowercase. [ Add Comment ]

This mechanism means that all of your files automatically live in their own namespaces, and each class within a file must have a unique identifier. So you do not need to learn special language features to solve this problem—the language takes care of it for you. [ Add Comment ]

Using other components

Whenever you want to use a predefined class in your program, the compiler must know how to locate it. Of course, the class might already exist in the same source code file that it’s being called from. In that case, you simply use the class—even if the class doesn’t get defined until later in the file. Java eliminates the “forward referencing” problem so you don’t need to think about it. [ Add Comment ]

What about a class that exists in some other file? You might think that the compiler should be smart enough to simply go and find it, but there is a problem. Imagine that you want to use a class of a particular name, but more than one definition for that class exists (presumably these are different definitions). Or worse, imagine that you’re writing a program, and as you’re building it you add a new class to your library that conflicts with the name of an existing class. [ Add Comment ]

To solve this problem, you must eliminate all potential ambiguities. This is accomplished by telling the Java compiler exactly what classes you want using the import keyword. import tells the compiler to bring in a package, which is a library of classes. (In other languages, a library could consist of functions and data as well as classes, but remember that all code in Java must be written inside a class.) [ Add Comment ]

Most of the time you’ll be using components from the standard Java libraries that come with your compiler. With these, you don’t need to worry about long, reversed domain names; you just say, for example:

import java.util.ArrayList;

to tell the compiler that you want to use Java’s ArrayList class. However, util contains a number of classes and you might want to use several of them without declaring them all explicitly. This is easily accomplished by using ‘*’ to indicate a wild card:

import java.util.*;

It is more common to import a collection of classes in this manner than to import classes individually. [ Add Comment ]

The static keyword

Ordinarily, when you create a class you are describing how objects of that class look and how they will behave. You don’t actually get anything until you create an object of that class with new, and at that point data storage is created and methods become available. [ Add Comment ]

But there are two situations in which this approach is not sufficient. One is if you want to have only one piece of storage for a particular piece of data, regardless of how many objects are created, or even if no objects are created. The other is if you need a method that isn’t associated with any particular object of this class. That is, you need a method that you can call even if no objects are created. You can achieve both of these effects with the static keyword. When you say something is static, it means that data or method is not tied to any particular object instance of that class. So even if you’ve never created an object of that class you can call a static method or access a piece of static data. With ordinary, non-static data and methods you must create an object and use that object to access the data or method, since non-static data and methods must know the particular object they are working with. Of course, since static methods don’t need any objects to be created before they are used, they cannot directly access non-static members or methods by simply calling those other members without referring to a named object (since non-static members and methods must be tied to a particular object). [ Add Comment ]

Some object-oriented languages use the terms class data and class methods, meaning that the data and methods exist only for the class as a whole, and not for any particular objects of the class. Sometimes the Java literature uses these terms too. [ Add Comment ]

To make a data member or method static, you simply place the keyword before the definition. For example, the following produces a static data member and initializes it: [ Add Comment ]

class StaticTest {
    static int i = 47;
}

Now even if you make two StaticTest objects, there will still be only one piece of storage for StaticTest.i. Both objects will share the same i. Consider: [ Add Comment ]

StaticTest st1 = new StaticTest();
StaticTest st2 = new StaticTest();

At this point, both st1.i and st2.i have the same value of 47 since they refer to the same piece of memory. [ Add Comment ]

There are two ways to refer to a static variable. As indicated above, you can name it via an object, by saying, for example, st2.i. You can also refer to it directly through its class name, something you cannot do with a non-static member. (This is the preferred way to refer to a static variable since it emphasizes that variable’s static nature.) [ Add Comment ]

StaticTest.i++;

The ++ operator increments the variable. At this point, both st1.i and st2.i will have the value 48. [ Add Comment ]

Similar logic applies to static methods. You can refer to a static method either through an object as you can with any method, or with the special additional syntax ClassName.method( ). You define a static method in a similar way: [ Add Comment ]

class StaticFun {
  static void incr() { StaticTest.i++; }
}

You can see that the StaticFun method incr( ) increments the static data i. You can call incr( ) in the typical way, through an object: [ Add Comment ]

StaticFun sf = new StaticFun();
sf.incr();

Or, because incr( ) is a static method, you can call it directly through its class: [ Add Comment ]

StaticFun.incr();

While static, when applied to a data member, definitely changes the way the data is created (one for each class vs. the non-static one for each object), when applied to a method it’s not so dramatic. An important use of static for methods is to allow you to call that method without creating an object. This is essential, as we will see, in defining the main( ) method that is the entry point for running an application. [ Add Comment ]

Like any method, a static method can create or use named objects of its type, so a static method is often used as a “shepherd” for a flock of instances of its own type. [ Add Comment ]

Your first Java program

Finally, here’s the program.[23] It starts by printing a string, and then the date, using the Date class from the Java standard library. Note that an additional style of comment is introduced here: the ‘//’, which is a comment until the end of the line: [ Add Comment ]

// HelloDate.java
import java.util.*;

public class HelloDate {
  public static void main(String[] args) {
    System.out.println("Hello, it's: ");
    System.out.println(new Date());
  }
}

At the beginning of each program file, you must place the import statement to bring in any extra classes you’ll need for the code in that file. Note that I say “extra;” that’s because there’s a certain library of classes that are automatically brought into every Java file: java.lang. Start up your Web browser and look at the documentation from Sun. (If you haven’t downloaded it from java.sun.com or otherwise installed the Java documentation, do so now). If you look at the list of the packages, you’ll see all the different class libraries that come with Java. Select java.lang. This will bring up a list of all the classes that are part of that library. Since java.lang is implicitly included in every Java code file, these classes are automatically available. There’s no Date class listed in java.lang, which means you must import another library to use that. If you don’t know the library where a particular class is, or if you want to see all of the classes, you can select “Tree” in the Java documentation. Now you can find every single class that comes with Java. Then you can use the browser’s “find” function to find Date. When you do you’ll see it listed as java.util.Date, which lets you know that it’s in the util library and that you must import java.util.* in order to use Date. [ Add Comment ]

If you go back to the beginning, select java.lang and then System, you’ll see that the System class has several fields, and if you select out you’ll discover that it’s a static PrintStream object. Since it’s static you don’t need to create anything. The out object is always there and you can just use it. What you can do with this out object is determined by the type it is: a PrintStream. Conveniently, PrintStream is shown in the description as a hyperlink, so if you click on that you’ll see a list of all the methods you can call for PrintStream. There are quite a few and these will be covered later in this book. For now all we’re interested in is println( ), which in effect means “print what I’m giving you out to the console and end with a new line.” Thus, in any Java program you write you can say System.out.println("things") whenever you want to print something to the console. [ Add Comment ]

The name of the class is the same as the name of the file. When you’re creating a stand-alone program such as this one, one of the classes in the file must have the same name as the file. (The compiler complains if you don’t do this.) That class must contain a method called main( ) with the signature shown: [ Add Comment ]

public static void main(String[] args) {

The public keyword means that the method is available to the outside world (described in detail in Chapter 5). The argument to main( ) is an array of String objects. The args won’t be used in this program, but the Java compiler insists that they be there because they hold the arguments invoked on the command line. [ Add Comment ]

The line that prints the date is quite interesting: [ Add Comment ]

System.out.println(new Date());

Consider the argument: a Date object is being created just to send its value to println( ). As soon as this statement is finished, that Date is unnecessary, and the garbage collector can come along and get it anytime. We don’t need to worry about cleaning it up. [ Add Comment ]

Compiling and running

To compile and run this program, and all the other programs in this book, you must first have a Java programming environment. There are a number of third-party development environments, but in this book we will assume that you are using the JDK from Sun, which is free. If you are using another development system, you will need to look in the documentation for that system to determine how to compile and run programs. [ Add Comment ]

Get on the Internet and go to java.sun.com. There you will find information and links that will lead you through the process of downloading and installing the JDK for your particular platform. [ Add Comment ]

Once the JDK is installed, and you’ve set up your computer’s path information so that it will find javac and java, download and unpack the source code for this book (you can find it on the CD ROM that’s bound in with this book, or at www.BruceEckel.com). This will create a subdirectory for each chapter in this book. Move to subdirectory c02 and type: [ Add Comment ]

javac HelloDate.java

This command should produce no response. If you get any kind of an error message it means you haven’t installed the JDK properly and you need to investigate those problems. [ Add Comment ]

On the other hand, if you just get your command prompt back, you can type:

java HelloDate

and you’ll get the message and the date as output. [ Add Comment ]

This is the process you can use to compile and run each of the programs in this book. However, you will see that the source code for this book also has a file called makefile in each chapter, and this contains “make” commands for automatically building the files for that chapter. See this book’s Web page at www.BruceEckel.com for details on how to use the makefiles. [ Add Comment ]

Comments and embedded documentation

There are two types of comments in Java. The first is the traditional C-style comment that was inherited by C++. These comments begin with a /* and continue, possibly across many lines, until a */. Note that many programmers will begin each line of a continued comment with a *, so you’ll often see:

/* This is a comment
*  that continues
*  across lines
*/

Remember, however, that everything inside the /* and */ is ignored, so there’s no difference in saying: [ Add Comment ]

/* This is a comment that
continues across lines */

The second form of comment comes from C++. It is the single-line comment, which starts at a // and continues until the end of the line. This type of comment is convenient and commonly used because it’s easy. You don’t need to hunt on the keyboard to find / and then * (instead, you just press the same key twice), and you don’t need to close the comment. So you will often see: [ Add Comment ]

// this is a one-line comment


Comment documentation

One of the thoughtful parts of the Java language is that the designers didn’t consider writing code to be the only important activity—they also thought about documenting it. Possibly the biggest problem with documenting code has been maintaining that documentation. If the documentation and the code are separate, it becomes a hassle to change the documentation every time you change the code. The solution seems simple: link the code to the documentation. The easiest way to do this is to put everything in the same file. To complete the picture, however, you need a special comment syntax to mark special documentation, and a tool to extract those comments and put them in a useful form. This is what Java has done. [ Add Comment ]

The tool to extract the comments is called javadoc. It uses some of the technology from the Java compiler to look for special comment tags you put in your programs. It not only extracts the information marked by these tags, but it also pulls out the class name or method name that adjoins the comment. This way you can get away with the minimal amount of work to generate decent program documentation. [ Add Comment ]

The output of javadoc is an HTML file that you can view with your Web browser. This tool allows you to create and maintain a single source file and automatically generate useful documentation. Because of javadoc we have a standard for creating documentation, and it’s easy enough that we can expect or even demand documentation with all Java libraries. [ Add Comment ]

Syntax

All of the javadoc commands occur only within /** comments. The comments end with */ as usual. There are two primary ways to use javadoc: embed HTML, or use “doc tags.” Doc tags are commands that start with a ‘@’ and are placed at the beginning of a comment line. (A leading ‘*’, however, is ignored.) [ Add Comment ]

There are three “types” of comment documentation, which correspond to the element the comment precedes: class, variable, or method. That is, a class comment appears right before the definition of a class; a variable comment appears right in front of the definition of a variable, and a method comment appears right in front of the definition of a method. As a simple example: [ Add Comment ]

/** A class comment */
public class docTest {
  /** A variable comment */
  public int i;
  /** A method comment */
  public void f() {}
}

Note that javadoc will process comment documentation for only public and protected members. Comments for private and “friendly” members (see Chapter 5) are ignored and you’ll see no output. (However, you can use the -private flag to include private members as well.) This makes sense, since only public and protected members are available outside the file, which is the client programmer’s perspective. However, all class comments are included in the output. [ Add Comment ]

The output for the above code is an HTML file that has the same standard format as all the rest of the Java documentation, so users will be comfortable with the format and can easily navigate your classes. It’s worth entering the above code, sending it through javadoc and viewing the resulting HTML file to see the results. [ Add Comment ]

Embedded HTML

Javadoc passes HTML commands through to the generated HTML document. This allows you full use of HTML; however, the primary motive is to let you format code, such as: [ Add Comment ]

/**
* <pre>
* System.out.println(new Date());
* </pre>
*/

You can also use HTML just as you would in any other Web document to format the regular text in your descriptions: [ Add Comment ]

/**
* You can <em>even</em> insert a list:
* <ol>
* <li> Item one
* <li> Item two
* <li> Item three
* </ol>
*/

Note that within the documentation comment, asterisks at the beginning of a line are thrown away by javadoc, along with leading spaces. Javadoc reformats everything so that it conforms to the standard documentation appearance. Don’t use headings such as <h1> or <hr> as embedded HTML because javadoc inserts its own headings and yours will interfere with them. [ Add Comment ]

All types of comment documentation—class, variable, and method—can support embedded HTML. [ Add Comment ]

@see: referring to other classes

All three types of comment documentation (class, variable, and method) can contain @see tags, which allow you to refer to the documentation in other classes. Javadoc will generate HTML with the @see tags hyperlinked to the other documentation. The forms are: [ Add Comment ]

@see classname
@see fully-qualified-classname
@see fully-qualified-classname#method-name

Each one adds a hyperlinked “See Also” entry to the generated documentation. Javadoc will not check the hyperlinks you give it to make sure they are valid. [ Add Comment ]

Class documentation tags

Along with embedded HTML and @see references, class documentation can include tags for version information and the author’s name. Class documentation can also be used for interfaces (see Chapter 8). [ Add Comment ]

@version

This is of the form:

@version version-information

in which version-information is any significant information you see fit to include. When the -version flag is placed on the javadoc command line, the version information will be called out specially in the generated HTML documentation. [ Add Comment ]

@author

This is of the form:

@author author-information

in which author-information is, presumably, your name, but it could also include your email address or any other appropriate information. When the -author flag is placed on the javadoc command line, the author information will be called out specially in the generated HTML documentation. [ Add Comment ]

You can have multiple author tags for a list of authors, but they must be placed consecutively. All the author information will be lumped together into a single paragraph in the generated HTML. [ Add Comment ]

@since

This tag allows you to indicate the version of this code that began using a particular feature. You’ll see it appearing in the HTML Java documentation to indicate what version of the JDK is used. [ Add Comment ]

Variable documentation tags

Variable documentation can include only embedded HTML and @see references. [ Add Comment ]

Method documentation tags

As well as embedded documentation and @see references, methods allow documentation tags for parameters, return values, and exceptions. [ Add Comment ]

@param

This is of the form:

@param parameter-name description

in which parameter-name is the identifier in the parameter list, and description is text that can continue on subsequent lines. The description is considered finished when a new documentation tag is encountered. You can have any number of these, presumably one for each parameter. [ Add Comment ]

@return

This is of the form:

@return description

in which description gives you the meaning of the return value. It can continue on subsequent lines. [ Add Comment ]

@throws

Exceptions will be demonstrated in Chapter 10, but briefly they are objects that can be “thrown” out of a method if that method fails. Although only one exception object can emerge when you call a method, a particular method might produce any number of different types of exceptions, all of which need descriptions. So the form for the exception tag is:

@throws fully-qualified-class-name description

in which fully-qualified-class-name gives an unambiguous name of an exception class that’s defined somewhere, and description (which can continue on subsequent lines) tells you why this particular type of exception can emerge from the method call. [ Add Comment ]

@deprecated

This is used to tag features that were superseded by an improved feature. The deprecated tag is a suggestion that you no longer use this particular feature, since sometime in the future it is likely to be removed. A method that is marked @deprecated causes the compiler to issue a warning if it is used. [ Add Comment ]

Documentation example

Here is the first Java program again, this time with documentation comments added:

//: c02:HelloDate.java
import java.util.*;

/** The first Thinking in Java example program.
 * Displays a string and today's date.
 * @author Bruce Eckel
 * @author www.BruceEckel.com
 * @version 2.0 
*/
public class HelloDate {
  /** Sole entry point to class & application
   * @param args array of string arguments
   * @return No return value
   * @exception exceptions No exceptions thrown
  */
  public static void main(String[] args) {
    System.out.println("Hello, it's: ");
    System.out.println(new Date());
  }
} ///:~

The first line of the file uses my own technique of putting a ‘:’ as a special marker for the comment line containing the source file name. That line contains the path information to the file (in this case, c02 indicates Chapter 2) followed by the file name[24]. The last line also finishes with a comment, and this one indicates the end of the source code listing, which allows it to be automatically extracted from the text of this book and checked with a compiler. [ Add Comment ]

Coding style

The unofficial standard in Java is to capitalize the first letter of a class name. If the class name consists of several words, they are run together (that is, you don’t use underscores to separate the names), and the first letter of each embedded word is capitalized, such as: [ Add Comment ]

class AllTheColorsOfTheRainbow { // ...

For almost everything else: methods, fields (member variables), and object reference names, the accepted style is just as it is for classes except that the first letter of the identifier is lowercase. For example: [ Add Comment ]

class AllTheColorsOfTheRainbow {
  int anIntegerRepresentingColors;
  void changeTheHueOfTheColor(int newHue) {
    // ...
  }
  // ...
}

Of course, you should remember that the user must also type all these long names, and so be merciful. [ Add Comment ]

The Java code you will see in the Sun libraries also follows the placement of open-and-close curly braces that you see used in this book. [ Add Comment ]

Summary

In this chapter you have seen enough of Java programming to understand how to write a simple program, and you have gotten an overview of the language and some of its basic ideas. However, the examples so far have all been of the form “do this, then do that, then do something else.” What if you want the program to make choices, such as “if the result of doing this is red, do that; if not, then do something else”? The support in Java for this fundamental programming activity will be covered in the next chapter. [ Add Comment ]

Exercises

Solutions to selected exercises can be found in the electronic document The Thinking in Java Annotated Solution Guide, available for a small fee from www.BruceEckel.com.

  1. Following the HelloDate.java example in this chapter, create a “hello, world” program that simply prints out that statement. You need only a single method in your class (the “main” one that gets executed when the program starts). Remember to make it static and to include the argument list, even though you don’t use the argument list. Compile the program with javac and run it using java. If you are using a different development environment than the JDK, learn how to compile and run programs in that environment. [ Add Comment ]
  2. Find the code fragments involving ATypeName and turn them into a program that compiles and runs. [ Add Comment ]
  3. Turn the DataOnly code fragments into a program that compiles and runs. [ Add Comment ]
  4. Modify Exercise 3 so that the values of the data in DataOnly are assigned to and printed in main( ). [ Add Comment ]
  5. Write a program that includes and calls the storage( ) method defined as a code fragment in this chapter. [ Add Comment ]
  6. Turn the StaticFun code fragments into a working program. [ Add Comment ]
  7. Write a program that prints three arguments taken from the command line. To do this, you’ll need to index into the command-line array of Strings. [ Add Comment ]
  8. Turn the AllTheColorsOfTheRainbow example into a program that compiles and runs. [ Add Comment ]
  9. Find the code for the second version of HelloDate.java, which is the simple comment documentation example. Execute javadoc on the file and view the results with your Web browser. [ Add Comment ]
  10. Turn docTest into a file that compiles and then run it through javadoc. Verify the resulting documentation with your Web browser. [ Add Comment ]
  11. Add an HTML list of items to the documentation in Exercise 10. [ Add Comment ]
  12. Take the program in Exercise 1 and add comment documentation to it. Extract this comment documentation into an HTML file using javadoc and view it with your Web browser.Add Comment ]

Add Comment ]


[20] This can be a flashpoint. There are those who say “clearly, it’s a pointer,” but this presumes an underlying implementation. Also, Java references are much more akin to C++ references than pointers in their syntax. In the first edition of this book, I chose to invent a new term, “handle,” because C++ references and Java references have some important differences. I was coming out of C++ and did not want to confuse the C++ programmers whom I assumed would be the largest audience for Java. In the 2nd edition, I decided that “reference” was the more commonly used term, and that anyone changing from C++ would have a lot more to cope with than the terminology of references, so they might as well jump in with both feet. However, there are people who disagree even with the term “reference.” I read in one book where it was “completely wrong to say that Java supports pass by reference,” because Java object identifiers (according to that author) are actually “object references.” And (he goes on) everything is actually pass by value. So you’re not passing by reference, you’re “passing an object reference by value.” One could argue for the precision of such convoluted explanations, but I think my approach simplifies the understanding of the concept without hurting anything (well, the language lawyers may claim that I’m lying to you, but I’ll say that I’m providing an appropriate abstraction.)

[21] static methods, which you’ll learn about soon, can be called for the class, without an object.

[22] With the usual exception of the aforementioned “special” data types boolean, char, byte, short, int, long, float, and double. In general, though, you pass objects, which really means you pass references to objects.

[23] Some programming environments will flash programs up on the screen and close them before you've had a chance to see the results. You can put in the following bit of code at the end of main( ) to pause the output:

    try {
      System.in.read();

} catch(Exception e) {}

This will pause the output until you press “Enter” (or any other key). This code involves concepts that will not be introduced until much later in the book, so you won’t understand it until then, but it will do the trick.

[24] A tool that I created using Python (see www.Python.org) uses this information to extract the code files, put them in appropriate subdirectories, and create makefiles.

[ Previous Chapter ] [ Short TOC ] [ Table of Contents ] [ Index ] [ Next Chapter ]
Last Update:05/21/2001